find your coatings consultants
Find and contact a coatings consultant near you.

Series 265 | Elasto-Shield TG

Generic Type Modified Polyurethane
Common Usage A trowel-grade compound for use with Elasto-Shield products. Used to fill and repair cracks, bugholes, spalled or otherwise damaged concrete, masonry and asphalt. Also used for sealing the edges of faying surfaces, sealing seams, filling pits and encapsulating rivet and bolt heads on the interior of steel tanks.
Colors Black
Volume Solids 89.0 ± 2.0% (mixed)
Recommended DFT Trowelled: 50 to 125 mils (1270-3175 microns)
Filling and Patching: Up to 1/4” (6.4 mm) deep
Curing Time
Temperature Recoat Window †
75°F (24°C) 3 hours
Curing time varies with air & substrate temperature, air movement, humidity and film thickness. † Note: Scarify the surface and apply a coat of Series V260 Tneme-Bond before recoating if the maximum recoat time has been exceeded. Refer to Elasto-Shield Application Guide.
Volatile Organic Compounds 0.74 lbs/gallon (88 grams/litre)
Theoretical Coverage See APPLICATION for coverage rates.
Number of Components Two—Liquids: Part A and Part B
1
Category
2
Chemical Name(required)
3
Concentration
4
What is this?

Note: Not Recommended (NR), Not Tested (NT), Please Call (PC)

 

Chemical Recommended Use - What is this?

The chemical resistance data listed on this website should only be used for general reference purposes. Substrates, temperatures, chemical combinations, and other variables can affect the performance of a coating in chemical exposure. Please contact your local to finalize the most appropriate system for your project.

Click the following button to download a PDF of the list of chemicals below.

1 Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates    to product's performance capabilities only.

2 Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.


Recommended Use
Chemical Occasional Contact Frequent Contact Secondary Containment Cargo Immersion Immersion Service

1 Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates    to product's performance capabilities only.

2 Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.

  • Color cards, swatches and fan decks are offered at no charge, by request , for more accurate color selection. Expert custom color matching is also available by contacting your Tnemec Coatings Consultant .
  • Deeptone colors may be more expensive than lighter colors. Please contact your Tnemec Coatings Consultant to verify product/color availability and pricing.
These digital colors should not be used to finalize your color selection. Please read our disclaimer . Use the color swatch tool on the left to request official color swatches.

Color Swatch Packet

Request another

(maximum 6 color swatches)

You haven't added any color swatches to your packet. Select some colors now by clicking a color above and then clicking the 'Request a Swatch' button on the color.

The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.

This ProductModified Polyurethane

GET THE LATEST NEWS AND UPDATES BY EMAIL FROM TNEMEC

support documents