Series 251SC | ChemBloc
Below is only a summary of product data. Please download the product datasheet for complete details.
English:
Product Data
SDS
Generic Type |
Novolac Vinyl Ester |
Common Usage |
A chemical resistant primer for use with Series 252SC secondary containment system. Note: Contact your Tnemec representative or Tnemec Technical Services with specific chemical exposures. |
Colors |
5002 Beige (primer only) |
Surfacer/Filler/Patcher |
Series 215, 218. Note: A repair kit of 201, with Part C fumed silica, is available for small patching/surfacing repairs (reference Technical Bulletin 99-22). For more extensive repairs and additional information, contact your Tnemec representative or Tnemec Technical Services. |
Topcoats |
Series 252SC |
Volume Solids |
Theoretical 89% (mixed). Series 251SC system contains a reactive monomer and some loss will occur during application and cure. Actual solids by volume will vary depending upon temperature and air movement. See Coverage Rates. |
Recommended DFT |
4.0 to 12.0 mils (100 to 305 microns) |
Curing Time |
Temperature | To Topcoat |
---|
75°F (24°C) | 6 to 72 hours | If more than 72 hours have elapsed between coats, the ChemBloc coated surface must be mechanically abraded before topcoating. Note: Curing time varies with surface temperature, air movement, humidity and film thickness. |
Volatile Organic Compounds |
Unthinned: 0.59 lbs/gallon (71 grams/litre) |
Theoretical Coverage |
1,123 mil sq ft/gal (27.6 m²/L at 25 microns). See APPLICATION for coverage rates. |
Number of Components |
Two: Part A (base) and Part B (catalyst) |
1
Category
No Chemicals Are Assigned To This Category
3
Concentration
Chemical Recommended Use - What is this?
The chemical resistance data listed on this website should only be used for general
reference purposes. Substrates, temperatures, chemical combinations, and other variables
can affect the performance of a coating in chemical exposure. Please contact your
local
to finalize the most appropriate system for your project.
1 Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates to product's performance capabilities only.
2 Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.
|
Recommended Use |
Chemical |
Occasional Contact |
Frequent Contact |
Secondary Containment |
Cargo Immersion |
Immersion Service |
1 Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates to product's performance capabilities only.
2 Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.
- Color cards, swatches and fan decks are offered at no charge, by
request
, for more accurate color selection. Expert custom color matching is also available
by contacting your
Tnemec Coatings Consultant
.
- Deeptone colors may be more expensive than lighter colors. Please contact your
Tnemec Coatings Consultant
to verify product/color availability and pricing.
Products Available In
Beige Primer
Disclaimer
Online color swatches are only digital reproductions of actual standards and will
vary in appearance due to differences in monitor and video card output. These digital
representations should not be used to finalize color selection(s).
Please contact your local
Tnemec Coatings Consultant
for assistance with suitable primer and finish coat selections and color matching.
Only certain products are available in all standard colors. Deeptone colors (i.e.
safety colors, brighter or deeper colors, etc.) shown typically cost more than lighter
colors.
Please contact your local
Tnemec Coatings Consultant
to verify product/color availability and pricing. Select colors and products are
ANSI/NSF certified for potable water. Consult
NSF
or your
Tnemec Coatings Consultant
for a complete listing of certified products.
Beige Primer|
rgb 247,234,213
These digital colors should not be used to finalize your color selection.
Please read our disclaimer
. Use the color swatch tool on the left to request official color swatches.
(maximum 6 color swatches)
You haven't added any color swatches to your packet. Select some colors now by clicking
a color above and then clicking the 'Request a Swatch' button on the color.
The products listed below are not exact equivalents. They are only products that
you may consider as alternatives in a general sense. Substrate type, condition,
temperatures, surface preparation, primer/topcoat selection and intended use are
just a few factors that will affect product selection. Please contact your local
Tnemec Coatings Consultant
for product recommendations.
This ProductNovolac Vinyl Ester
|
|