find your coatings consultants
Find and contact a coatings consultant near you.

Series 223 | Deco-Trowel

Generic Type Colored Quartz-Filled Modified Polyamine Epoxy
Common Usage A decorative mortar floor-topping system installed at 3/16” to 1/4” thickness. Protects against impact, abrasion and mild chemicals with an aesthetically pleasing appearance.
Colors Available in 12 standard colors. Refer to StrataShield Decorative Quartz color card. Custom colors also available. Note: Series 223 aggregate is larger than that used in Series 222.
Note: Epoxies chalk and yellow with age, extended exposure to UV and artificial lighting. Lack of ventilation, incomplete mixing, miscatalyzation or the use of heaters that emit carbon dioxide and carbon monoxide during application and initial stages of curing may cause amine blush, possibly affecting adhesion of subsequent topcoats.
Finish Decorative quartz—multi-colored appearance. The finished appearance and texture will depend on the type, film thickness and number of clear finish coats selected.
Surfacer/Filler/Patcher Series 206, 215. Note: A repair kit of 201, with Part C fumed silica, is available for small patching/surfacing repairs. For more extensive repairs and additional information, contact your Tnemec representative or Tnemec Technical Services.
Primers Concrete: Series 201, 208, 241
Topcoats Series 247, 248, 284, 285, 294, 295, 296. Note: If Series 247, 248, 285, 294, 295 or 296 is selected for the finish coat, an intermediate coat of Series 284 is required. Refer to the StrataShield Installation and Application guide for floors.
Volume Solids 100% (mixed)
Recommended DFT Suggested 1/4”
Curing Time
Temperature To Topcoat To Place in Service
75°F (24°C) 12 to 24 hours 24 hours
Note: If more than 24 hours have elapsed between coats, the coated surface must be mechanically abraded before topcoating. Curing time varies with surface temperature, air movement, humidity and film thickness.
Volatile Organic Compounds Unthinned: 0.13 lbs/gallon (15 grams/litre)
Theoretical Coverage 1,604 mil sq ft/gal (39.4 m²/L at 25 microns). See APPLICATION for coverage rates.
Number of Components Three—Liquids: Part A & Part B (2 Parts A to 1 Part B by volume). Colored quartz: Part C
The Part C colored quartz (ChromaQuartz) is available from Tnemec or can be purchased from a different supplier.
1
Category
2
Chemical Name(required)
3
Concentration
4
What is this?

Note: Not Recommended (NR), Not Tested (NT), Please Call (PC)

 

Chemical Recommended Use - What is this?

The chemical resistance data listed on this website should only be used for general reference purposes. Substrates, temperatures, chemical combinations, and other variables can affect the performance of a coating in chemical exposure. Please contact your local to finalize the most appropriate system for your project.

Click the following button to download a PDF of the list of chemicals below.

1 Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates    to product's performance capabilities only.

2 Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.


Recommended Use
Chemical Occasional Contact Frequent Contact Secondary Containment Cargo Immersion Immersion Service

1 Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates    to product's performance capabilities only.

2 Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.

  • Color cards, swatches and fan decks are offered at no charge, by request , for more accurate color selection. Expert custom color matching is also available by contacting your Tnemec Coatings Consultant .
  • Deeptone colors may be more expensive than lighter colors. Please contact your Tnemec Coatings Consultant to verify product/color availability and pricing.

Products Available In 222 Deco-Tread 201

222 Deco-Tread| 201 View hi-res version
Request a Swatch Swatch Unavailable
These digital colors should not be used to finalize your color selection. Please read our disclaimer . Use the color swatch tool on the left to request official color swatches.

Color Swatch Packet

Request another

(maximum 6 color swatches)

You haven't added any color swatches to your packet. Select some colors now by clicking a color above and then clicking the 'Request a Swatch' button on the color.

The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.

This ProductColored Quartz-Filled Modified Polyamine Epoxy
Volume Solids Rec. DFT V.O.C. # of Components
100% (mixed) Suggested 1/4” Unthinned: 0.13 lbs/gallon (15 grams/litre) Three—Liquids: Part A & Part B (2 Parts A to 1 Part B by volume). Colored quartz: Part C
The Part C colored quartz (ChromaQuartz) is available from Tnemec or can be purchased from a different supplier.
Series 224 | Deco-Fleck Decorative Flake-Filled Modified Polyamine Epoxy
Hide this product's data
Volume Solids Rec. DFT V.O.C. # of Components
100% (mixed) From 20 mils DFT to 1/16” depending on broadcast method. Unthinned: 0.13 lbs/gallon (15 grams/litre) Three—Liquids: Part A & Part B (2 Parts A to 1 Part B by volume). Colored Flake: Part C
The Part C colored flake is available from Tnemec or can be purchased from a different supplier.