||Colored Quartz-Filled Modified Polyamine Epoxy
||A decorative broadcast or slurry broadcast laminated floor-topping system installed at 1/8” minimum thickness. Protects against impact, abrasion and mild chemicals with an aesthetically pleasing appearance.
||Available in 12 standard colors. Refer to StrataShield Decorative Quartz Color card. Custom colors also available. Note: Epoxies chalk and yellow with age, extended exposure to UV and artificial lighting. Lack of ventilation, incomplete mixing, miscatalyzation or the use of heaters that emit carbon dioxide and carbon monoxide during application and initial stages of curing may cause amine blush, possibly affecting adhesion of subsequent topcoats.
||Decorative quartz—multi-colored appearance. The finished appearance and texture will depend on the type, film thickness and number of the clear finish coats selected.
||Series 206, 215. Note: A repair kit of 201, with Part C fumed silica, is available for small patching/surfacing repairs. For more extensive repairs and additional information, contact your Tnemec representative or Tnemec Technical Services.
||Concrete: Self-priming or Series 201, 208, 241.
||Series 247, 248, 256, 284, 285, 294, 295, 296. Note: If Series 247, 248, 285, 294, 295 or 296 is selected for the finish coat, an intermediate coat of Series 284 is required. Refer to the StrataShield Installation and Application guide for floors.
||Minimum of 1/8”. Requires two broadcast applications at 1/16” each or applied as a slurry broadcast.
Note: If more than 24 hours have elapsed between coats, the coated surface must be mechanically abraded before topcoating. Note: There is no maximum recoat time if aggregate has been broadcast to refusal into the preceding coat. Curing time varies with surface temperature, air movement, humidity and film thickness.
|Temperature || To Topcoat/Broadcast || To Place in Service|
| 75°F (24°C) || 12 to 24 hours || 24 hours |
|Volatile Organic Compounds
||Unthinned: 0.13 lbs/gallon (15 grams/litre)
||1,604 mil sq ft/gal (39.4 m²/L at 25 microns). See APPLICATION for coverage rates.
|Number of Components
||Three—Liquids: Part A & Part B (2 Parts A to 1 Part B by volume). Colored quartz: Part C
The Part C colored quartz (ChromaQuartz) is available from Tnemec or can be purchased from a different supplier.