find your coatings consultants
Find and contact a coatings consultant near you.

Series 22 | Epoxoline

Generic Type Modified Polyamine Epoxy
Common Usage An advanced generation, 100% solids, high-build epoxy for the protection of steel and concrete. It provides excellent resistance to abrasion and is suitable for immersion service in potable water, wastewater, crude oil, and finished fuel environments. Specialized curing mechanism allows for faster cure response with airless spray application.
Colors WH11 Off-White, 1218 Light Blue, 1255 Beige
Finish Semi-Gloss
Surfacer/Filler/Patcher Series 215, 217, 218
Primers Steel: Self-priming, 20HS, FC20HS, 61, 66, 66HS, L69, L69F, N69, N69F, 90-97, H90-97, 90G-1K97, 91-H2O, 94-H2O, L140, L140F, N140, N140F, V140, V140F, 161, 161HS. Note: Series 20HS, FC20HS, 66, 66HS, L69, N69, L140, N140, V140, 161 or 161HS exposed more than 60 days; L69F, N69F, V69F, L140F, N140F or V140F exposed more than 30 days; 61 exposed more than 14 days must first be scarified or reprimed with themselves prior to topcoating with 22.
Topcoats Series 73, 740, 750, 1028, 1029, 1074, 1074U, 1075, 1075U, 1080, 1081. Note: Series 22 exterior (sunlight) exposed for longer than maximum recoat requires scarification by abrasive blasting prior to topcoating.
Volume Solids 100% (mixed) †
Recommended DFT 16 to 40 mils (400 to 1016 microns) in one or two coats.
Curing Time
Temperature To Touch Dry Through Minimum to Recoat Return to Service Maximum to Recoat
95°F (35°C)2 1/2 hours5 1/2 hours4 hours5 days7 days
75°F (24°C)7 hours18 hours16 hours5 days7 days
50°F (10°C)24 hours27 hours32 hours7 days7 days
Note: These cure times are based on 20.0 mil (500 micron) dry film thickness. Cure time varies with surface temperature, air movement, humidity, and film thickness. Ventilation: When used as a tank lining or in enclosed areas, provide adequate ventilation during application and cure.
Volatile Organic Compounds Unthinned: 0.10 lbs/gallon (12 grams/litre)
Thinned 5%: 0.44 lbs/gallon (52 grams/litre) †
HAPS Unthinned: 0.0 lbs/gal solids
Thinned 5%: 0.37 lbs/gal solids
Theoretical Coverage 1,604 mil sq ft/gal (39.4 m²/L at 25 microns). See APPLICATION for coverage rates. †
Number of Components Two: Part A (polyamine) and Part B (epoxy)

Chemical Recommended Use - What is this?

The chemical resistance data listed on this website should only be used for general reference purposes. Substrates, temperatures, chemical combinations, and other variables can affect the performance of a coating in chemical exposure. Please contact your local to finalize the most appropriate system for your project.

Click the following button to download a PDF of the list of chemicals below.

1 Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates    to product's performance capabilities only.

2 Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.


Recommended Use
Chemical Occasional Contact Frequent Contact Secondary Containment Cargo Immersion Immersion Service
1, 1, 1-Trichloroethane

Also Known As: Trichloroethane

120°F (49°C) 120°F (49°C)
Ammonium Hydroxide
Ammonium Sulfate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Aviation Gas 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
B20 Bio Diesel 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Benzene 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Calcium Chloride
Citric Acid
Crude Oil (Sour) 275°F (135°C) 275°F (135°C) 275°F (135°C) 275°F (135°C) 275°F (135°C)
Crude Oil (Sweet) 160°F (71°C) 160°F (71°C) 160°F (71°C) 160°F (71°C) 160°F (71°C)
Diesel Fuel

Also Known As: Fuel Oil, Diesel Oil

140°F (60°C) 140°F (60°C) 140°F (60°C) 140°F (60°C) 140°F (60°C)
Ethanol

Also Known As: Ethyl Alcohol, Denatured Alcohol

120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Gasohol E10 (10% Ethanol) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Gasohol E15 (15% Ethanol) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Gasohol E30 (30% Ethanol) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Gasohol E50 (50% Ethanol) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Gasohol E85 (85% Ethanol) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Gasoline (Reformulated) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Gasoline (Unleaded) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Gasoline (w/ETBE, 15% max) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Gasoline (w/MTBE, 15% max) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Gasoline (w/TAME, 15% max) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Gasoline (w/TBA, 15% max) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Gasoline (w/WTBE, 15% max) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Heptane 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Hydraulic Fluid

Also Known As: Hydraulic Oil

140°F (60°C) 140°F (60°C) 140°F (60°C) 140°F (60°C) 140°F (60°C)
Isopropyl Alcohol 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Jet A Fuel 140°F (60°C) 140°F (60°C) 140°F (60°C) 140°F (60°C) 140°F (60°C)
JP-4 Aviation Fuel 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
JP-5 Aviation Fuel 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Kerosene 140°F (60°C) 140°F (60°C) 140°F (60°C) 140°F (60°C) 140°F (60°C)
Lubricating Oil (SAE 5W-40, et al)

Also Known As: Motor Oil

120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Magnesium Bisulfite 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Methanol

Also Known As: Methyl Alcohol

NR NR NR NR NR
Methyl tert-Butyl Ether (MTBE) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Mineral Oil 140°F (60°C) 140°F (60°C) 140°F (60°C) 140°F (60°C) 140°F (60°C)
Mineral Spirits 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Naphtha 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Propylene Glycol 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Sodium Bicarbonate 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Sodium Chloride (sat'd)

Also Known As: Brine, Water (Sea), Salt Brine

180°F (82°C) 180°F (82°C) 180°F (82°C) 180°F (82°C) 180°F (82°C)
Sodium Hydroxide

Also Known As: Caustic Soda

Toluene 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Transmission Fluid 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Trichloroethylene 120°F (49°C) 120°F (49°C)
Water (deionized, non-potable)

Also Known As: Water (Demineralized, Non-potable)

140°F (60°C) 140°F (60°C) 140°F (60°C) 140°F (60°C) 140°F (60°C)
Water (distilled, non-potable) 140°F (60°C) 140°F (60°C) 140°F (60°C) 140°F (60°C) 140°F (60°C)
Water (fresh, non-potable) 200°F (93°C) 200°F (93°C) 200°F (93°C) 200°F (93°C) 200°F (93°C)
Xylene 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)

1 Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates    to product's performance capabilities only.

2 Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.

  • Color cards, swatches and fan decks are offered at no charge, by request , for more accurate color selection. Expert custom color matching is also available by contacting your Tnemec Coatings Consultant .
  • Deeptone colors may be more expensive than lighter colors. Please contact your Tnemec Coatings Consultant to verify product/color availability and pricing.

Products Available In Beige 1255

Beige| 1255 rgb 232,212,192
Swatch Unavailable
These digital colors should not be used to finalize your color selection. Please read our disclaimer . Use the color swatch tool on the left to request official color swatches.

Color Swatch Packet

Request another

(maximum 6 color swatches)

You haven't added any color swatches to your packet. Select some colors now by clicking a color above and then clicking the 'Request a Swatch' button on the color.

The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.

This ProductModified Polyamine Epoxy