find your coatings consultants
Find and contact a coatings consultant near you.

Series 218 | MortarClad

Generic Type Epoxy Modified Cementitious Mortar
Common Usage A high-performance, aggregate reinforced material for surfacing, patching and filling voids and bugholes in concrete substrates. Generally topcoated with a variety of high-performance epoxies and polyurethanes for use in mild to aggressive exposures.
Colors Greenish Gray
Primers Concrete: Self-priming
CMU: Self-priming
Topcoats Series 1, 20, 22, FC22, 30, 46H-413, 61, 66, L69, N69, 84, 104, 120, L140, N140, 151-1051, 161, 201, 205, 222, 223, 224, 237, 238, 239, 262, 264, 270, 273, 280, 281, 282, 406, 434, 435, 436, 446.
Note: Refer to the applicable topcoat data sheet for color availability and additional information.
Volume Solids 100% (mixed)
Recommended DFT Parge Coat: 1/16”-1/4” per lift; maximum 1/2” thickness
Feather-edge Capable: 1/32”
Curing Time
Temperature To Touch To Recoat with Itself To Topcoat
75°F (24°C)
& 50% R.H.
3-4 hours unlimited † 15 hours minimum
† Note: When the first application is equal to or greater than 1/4”, or the second application is equal to or greater than 1/4”, then the maximum recoat window with itself is 2 hours.
Volatile Organic Compounds Unthinned: 0.15 lbs/gallon (19 grams/litre)
Number of Components Three—Liquid: Part A and Part B Powder: Part C
1
Category
2
Chemical Name(required)
3
Concentration
4
What is this?

Note: Not Recommended (NR), Not Tested (NT), Please Call (PC)

 

Chemical Recommended Use - What is this?

The chemical resistance data listed on this website should only be used for general reference purposes. Substrates, temperatures, chemical combinations, and other variables can affect the performance of a coating in chemical exposure. Please contact your local to finalize the most appropriate system for your project.

Click the following button to download a PDF of the list of chemicals below.

*Results are NOT suitable for direct or indirect food contact. Intended use exposure results relate to product's performance and substrate protection capabilities only.


Recommended Use
Chemical Occasional Contact Frequent Contact Secondary Containment Cargo Immersion Immersion Service
*Results are NOT suitable for direct or indirect food contact. Intended use exposure results relate to product's performance and substrate protection capabilities only.
  • Color cards, swatches and fan decks are offered at no charge, by request , for more accurate color selection. Expert custom color matching is also available by contacting your Tnemec Coatings Consultant .
  • Deeptone colors may be more expensive than lighter colors. Please contact your Tnemec Coatings Consultant to verify product/color availability and pricing.
These digital colors should not be used to finalize your color selection. Please read our disclaimer . Use the color swatch tool on the left to request official color swatches.

Color Swatch Packet

Request another

(maximum 6 color swatches)

You haven't added any color swatches to your packet. Select some colors now by clicking a color above and then clicking the 'Request a Swatch' button on the color.

The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.

This ProductEpoxy Modified Cementitious Mortar

Spanish version of product datasheet is currently not available.

French version of product datasheet is currently not available.