Series 211-215 & 216 | Fiberglass Mat
Below is only a summary of product data. Please download the product datasheet for complete details.
English:
Product Data
SDS
Generic Type |
3/4 oz Chopped Strand Mat |
Common Usage |
Provides fiberglass mat reinforcement to epoxy & vinyl ester lining systems. Increases impact, thermal shock and abrasion resistance for greater durability. |
Base Coats |
Series 22, 215, 206SC, 237SC, 239SC, 252SC, 265, 434. |
Topcoats |
Refer to applicable product data sheet for topcoat information. |
1
Category
No Chemicals Are Assigned To This Category
3
Concentration
Chemical Recommended Use - What is this?
The chemical resistance data listed on this website should only be used for general
reference purposes. Substrates, temperatures, chemical combinations, and other variables
can affect the performance of a coating in chemical exposure. Please contact your
local
to finalize the most appropriate system for your project.
1 Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates to product's performance capabilities only.
2 Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.
|
Recommended Use |
Chemical |
Occasional Contact |
Frequent Contact |
Secondary Containment |
Cargo Immersion |
Immersion Service |
1 Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates to product's performance capabilities only.
2 Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.
- Color cards, swatches and fan decks are offered at no charge, by
request
, for more accurate color selection. Expert custom color matching is also available
by contacting your
Tnemec Coatings Consultant
.
- Deeptone colors may be more expensive than lighter colors. Please contact your
Tnemec Coatings Consultant
to verify product/color availability and pricing.
Disclaimer
Online color swatches are only digital reproductions of actual standards and will
vary in appearance due to differences in monitor and video card output. These digital
representations should not be used to finalize color selection(s).
Please contact your local
Tnemec Coatings Consultant
for assistance with suitable primer and finish coat selections and color matching.
Only certain products are available in all standard colors. Deeptone colors (i.e.
safety colors, brighter or deeper colors, etc.) shown typically cost more than lighter
colors.
Please contact your local
Tnemec Coatings Consultant
to verify product/color availability and pricing. Select colors and products are
ANSI/NSF certified for potable water. Consult
NSF
or your
Tnemec Coatings Consultant
for a complete listing of certified products.
These digital colors should not be used to finalize your color selection.
Please read our disclaimer
. Use the color swatch tool on the left to request official color swatches.
(maximum 6 color swatches)
You haven't added any color swatches to your packet. Select some colors now by clicking
a color above and then clicking the 'Request a Swatch' button on the color.
The products listed below are not exact equivalents. They are only products that
you may consider as alternatives in a general sense. Substrate type, condition,
temperatures, surface preparation, primer/topcoat selection and intended use are
just a few factors that will affect product selection. Please contact your local
Tnemec Coatings Consultant
for product recommendations.
This Product3/4 oz Chopped Strand Mat
|
|
Spanish version of product datasheet is currently not available.
French version of product datasheet is currently not available.