find your coatings consultants
Find and contact a coatings consultant near you.

Series 206SC | ChemBloc

Generic Type Modified Flexible Polyamine Epoxy
Common Usage Glass reinforced flexible epoxy mortar basecoat for bridging small substrate cracks in secondary containment concrete structures. Replaces mortar/slurry basecoat for Series 237SC, 239SC and 252SC when a flexible basecoat is desired.
Colors 33GR Gray. Note: Epoxies chalk and yellow with age, extended exposure to UV light and artificial lighting. Lack of ventilation, incomplete mixing, miscatalyzation or the use of heaters that emit carbon dioxide and carbon monoxide during application and initial stages of curing may cause amine blush, possibly affecting adhesion of subsequent topcoats.
Surfacer/Filler/Patcher Series 215, 218. Note: A repair kit of 201, with Part C fumed silica, is available for small patching/surfacing repairs. For more extensive repairs and additional information, contact your Tnemec representative or Tnemec Technical Services.
Primers Series 201, 208, 241
Topcoats Series 120-5001, 252SC, 280, 282. Note: A saturant coat of 237SC or 239SC liquids is required over fiberglass mat prior to application of topcoat.
Volume Solids 100% (mixed)
Recommended DFT Mortar/Slurry Basecoat: 60 to 80 mils (1525 to 2030 microns).
Curing Time
TemperatureTo TopcoatTo Place in Service
75°F (24°C)12 to 24 hours24 hours
Volatile Organic Compounds 0.03 lbs/gallon (4 grams/litre)
Theoretical Coverage 1,604 mil sq ft/gal (39.4 m²/L at 25 microns). See APPLICATION for coverage rates.
Number of Components Mortar Containment Kit (MCK)-Three: Part A (epoxy), Part B (amine) and Part C (aggregate)
1
Category
2
Chemical Name(required)
3
Concentration
4
What is this?

Note: Not Recommended (NR), Not Tested (NT), Please Call (PC)

 

Chemical Recommended Use - What is this?

The chemical resistance data listed on this website should only be used for general reference purposes. Substrates, temperatures, chemical combinations, and other variables can affect the performance of a coating in chemical exposure. Please contact your local to finalize the most appropriate system for your project.

Click the following button to download a PDF of the list of chemicals below.

1 Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates    to product's performance capabilities only.

2 Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.


Recommended Use
Chemical Occasional Contact Frequent Contact Secondary Containment Cargo Immersion Immersion Service

1 Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates    to product's performance capabilities only.

2 Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.

  • Color cards, swatches and fan decks are offered at no charge, by request , for more accurate color selection. Expert custom color matching is also available by contacting your Tnemec Coatings Consultant .
  • Deeptone colors may be more expensive than lighter colors. Please contact your Tnemec Coatings Consultant to verify product/color availability and pricing.
These digital colors should not be used to finalize your color selection. Please read our disclaimer . Use the color swatch tool on the left to request official color swatches.

Color Swatch Packet

Request another

(maximum 6 color swatches)

You haven't added any color swatches to your packet. Select some colors now by clicking a color above and then clicking the 'Request a Swatch' button on the color.

The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.

This ProductModified Flexible Polyamine Epoxy

GET THE LATEST NEWS AND UPDATES BY EMAIL FROM TNEMEC

support documents