find your coatings consultants
Find and contact a coatings consultant near you.

Series 205 | Terra-Tread FC

Generic Type Polyamide Epoxy
Common Usage A fast-cure, versatile coating that can be used as a penetrating primer or a general duty topcoat for protection against abrasion and mild chemicals. Can be applied in temperatures as low as 35°F (2°C).
Colors Clear or pigmented. Available in the 16 standard StrataShield colors. Special colors available, please contact your Tnemec representative for special colors.
Finish Pigmented: Satin Clear: Gloss
Primers Concrete: Self-priming
Topcoats Series 205, 206, 210, 280, 281, 290, 291, 295
Volume Solids 58.0 ± 2.0% (mixed) †
Recommended DFT 3.0 to 5.0 mils (75 to 125 microns) per coat.
Note: As a stand alone system, two or more coats may be required.
Curing Time
Temperature To Topcoat To Place in Service
75°F (24°C) 3-4 hours 6-8 hours
65°F (18°C) 5-6 hours 8-10 hours
55°F (13°C) 10-12 hours 12-14 hours
45°F (7°C) 16-18 hours 18-20 hours
35°F (2°C) 20-22 hours 24-28 hours
Curing time varies with surface temperature, air movement, humidity and film thickness.
Volatile Organic Compounds Unthinned: 2.93 lbs/gallon (351 grams/litre)
Thinned 5%: 3.12 lbs/gallon (373 grams/litre)
Thinned 10%: 3.29 lbs/gallon (394 grams/litre) †
Theoretical Coverage 930 mil sq ft/gal (22.8 m²/L at 25 microns). See APPLICATION for coverage rates. †
Number of Components Two: Part A and Part B (1 Part A component to 1 Part B component by volume.)
1
Category
2
Chemical Name(required)
3
Concentration
4
What is this?

Note: Not Recommended (NR), Not Tested (NT), Please Call (PC)

 

Chemical Recommended Use - What is this?

The chemical resistance data listed on this website should only be used for general reference purposes. Substrates, temperatures, chemical combinations, and other variables can affect the performance of a coating in chemical exposure. Please contact your local to finalize the most appropriate system for your project.

Click the following button to download a PDF of the list of chemicals below.

1 Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates    to product's performance capabilities only.

2 Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.


Recommended Use
Chemical Occasional Contact Frequent Contact Secondary Containment Cargo Immersion Immersion Service

1 Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates    to product's performance capabilities only.

2 Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.

  • Color cards, swatches and fan decks are offered at no charge, by request , for more accurate color selection. Expert custom color matching is also available by contacting your Tnemec Coatings Consultant .
  • Deeptone colors may be more expensive than lighter colors. Please contact your Tnemec Coatings Consultant to verify product/color availability and pricing.

Products Available In White 11WH

White| 11WH (formerly WH01) rgb 242,238,231
Request a Swatch Swatch Unavailable
These digital colors should not be used to finalize your color selection. Please read our disclaimer . Use the color swatch tool on the left to request official color swatches.

Color Swatch Packet

Request another

(maximum 6 color swatches)

You haven't added any color swatches to your packet. Select some colors now by clicking a color above and then clicking the 'Request a Swatch' button on the color.

The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.

This ProductPolyamide Epoxy
Volume Solids Rec. DFT V.O.C. # of Components
58.0 ± 2.0% (mixed) † 3.0 to 5.0 mils (75 to 125 microns) per coat.
Note: As a stand alone system, two or more coats may be required.
Unthinned: 2.93 lbs/gallon (351 grams/litre)
Thinned 5%: 3.12 lbs/gallon (373 grams/litre)
Thinned 10%: 3.29 lbs/gallon (394 grams/litre) †
Two: Part A and Part B (1 Part A component to 1 Part B component by volume.)
Series 201 | Epoxoprime Modified Polyamine Epoxy
Hide this product's data
Volume Solids Rec. DFT V.O.C. # of Components
100% (mixed) Concrete: Horizontal: 6.0 to 12.0 mils (150 to 305 microns) per coat. Vertical - 4.0 to 6.0 mils (100 to 150 microns) per coat.
Wall board, Drywall & Wood: 4.0 to 6.0 mils (100 to 150 microns) per coat—two coats applied at 30 to 45 minute intervals.
Unthinned: 0.24 lbs/gallon (28 grams/litre)
Thinned 5% (No. 2 Thinner): 0.57 lbs/gallon (68 grams/litre)
Thinned 5% (No. 42 Thinner): 0.55 lbs/gallon (65 grams/litre)
Two: Part A and Part B (2 Parts A to 1 Part B by volume)