find your coatings consultants
Find and contact a coatings consultant near you.

Series 181 | W.B. Tneme-Crete

Generic Type Acrylic Emulsion
Common Usage Decorative, high-build protection against weather, driving rain, industrial fumes and alternate freezing-thawing. Formulated to resist mildew growth on the paint film. Available in smooth (Series 180) and sand-texture (Series 181) finishes for concrete, CMU and properly primed steel. Spray application “dry-falls” under certain conditions.
Colors Refer to Tnemec Color Guide.
Finish Flat, sand texture
Primers Self-priming on concrete, masonry, brick, stucco and lightweight block.
Split-Face & Split-Fluted CMU: Series 54, 130, 1254
Steel: 10, 37H, 66, L69, N69, V69, N69F, V69F, 90E-92, L140, N140, V140, N140F, V140F, 161
Topcoats Series 1028, 1029
Volume Solids 44.0 ± 2.0% †
Recommended DFT 4.0 to 10.0 mils (100 to 255 microns) per coat. Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. See APPLICATION and/or contact your Tnemec representative.
Curing Time
Temperature To Touch To Recoat
75°F (24°C) 1 hour 3 hours
Curing time varies with surface temperature, air movement, humidity and film thickness.
Volatile Organic Compounds Unthinned: 0.82 lbs/gallon (98 grams/litre)
Thinned 5%: 0.82 lbs/gallon (98 grams/litre) †
Theoretical Coverage 705 mil sq ft/gal (17.3 m2/L at 25 microns). See APPLICATION for coverage rates.
Number of Components One
1
Category
2
Chemical Name(required)
3
Concentration
4
What is this?

Note: Not Recommended (NR), Not Tested (NT), Please Call (PC)

 

Chemical Recommended Use - What is this?

The chemical resistance data listed on this website should only be used for general reference purposes. Substrates, temperatures, chemical combinations, and other variables can affect the performance of a coating in chemical exposure. Please contact your local to finalize the most appropriate system for your project.

Click the following button to download a PDF of the list of chemicals below.

1 Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates    to product's performance capabilities only.

2 Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.


Recommended Use
Chemical Occasional Contact Frequent Contact Secondary Containment Cargo Immersion Immersion Service

1 Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates    to product's performance capabilities only.

2 Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.

  • Color cards, swatches and fan decks are offered at no charge, by request , for more accurate color selection. Expert custom color matching is also available by contacting your Tnemec Coatings Consultant .
  • Deeptone colors may be more expensive than lighter colors. Please contact your Tnemec Coatings Consultant to verify product/color availability and pricing.

Products Available In Vapor Mist 01GR

Vapor Mist| 01GR rgb 211,211,216
Request a Swatch Swatch Unavailable
These digital colors should not be used to finalize your color selection. Please read our disclaimer . Use the color swatch tool on the left to request official color swatches.

Color Swatch Packet

Request another

(maximum 6 color swatches)

You haven't added any color swatches to your packet. Select some colors now by clicking a color above and then clicking the 'Request a Swatch' button on the color.

The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.

This ProductAcrylic Emulsion
Volume Solids Rec. DFT V.O.C. # of Components
44.0 ± 2.0% † 4.0 to 10.0 mils (100 to 255 microns) per coat. Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. See APPLICATION and/or contact your Tnemec representative. Unthinned: 0.82 lbs/gallon (98 grams/litre)
Thinned 5%: 0.82 lbs/gallon (98 grams/litre) †
One
Series 156 | Enviro-Crete Modified Waterborne Acrylate
Hide this product's data
Volume Solids Rec. DFT V.O.C. # of Components
50.9 ± 2.0% † 4.0 to 8.0 mils (100 to 205 microns) per coat. Unthinned- 0.41 lbs/gallon (49 grams/litre) † One
Series 157 | Enviro-Crete Modified Waterborne Acrylate
Hide this product's data
Volume Solids Rec. DFT V.O.C. # of Components
55.5 ± 2.0% † 6.0 to 9.0 mils (150 to 230 microns) per coat. Unthinned - 0.38 lbs/gallon (45 grams/litre) † One
Series 180 | W.B. Tneme-Crete Acrylic Emulsion
Hide this product's data
Volume Solids Rec. DFT V.O.C. # of Components
44.0 ± 2.0% † 4.0 to 10.0 mils (100 to 255 microns) per coat. Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. See APPLICATION and/or contact your Tnemec representative. Unthinned: 0.82 lbs/gallon (98 grams/litre)
Thinned 5%: 0.82 lbs/gallon (98 grams/litre) †
One

GET THE LATEST NEWS AND UPDATES BY EMAIL FROM TNEMEC

support documents