Series 161 | Tneme-Fascure
Below is only a summary of product data. Please download the product datasheet for complete details.
English:
Product Data
SDS
Generic Type |
Polyamide Epoxy |
Common Usage |
Low temperature-cure, corrosion-resistant coating for protection against abrasion, immersion and mild chemical contact. Fast recoat at 75°F (24°C). |
Colors |
Refer to Tnemec Color Guide. Note: Epoxies chalk with extended exposure to sunlight. Lack of ventilation, incomplete mixing, miscatalyzation or the use of heaters that emit carbon dioxide and carbon monoxide during application and initial stages of curing may cause yellowing to occur. |
Finish |
Satin |
Primers |
Steel: Self-priming or Series 20, FC20, 37H, 66, N69, N69F, 90, 160, 530 Galvanized Steel and Non-Ferrous Metal: Self-priming or Series 66, N69 Concrete: Self-priming or 54-660, 130, 201, 214 CMU: 54-562, 54-660, 130, 216, 218 Drywall: 51-792 for dry interior environments |
Topcoats |
46H-413, 66, N69, 73, 84, 104, 113, 114, 161, 175, 262, 265, 290, 291, 1074, 1075. Refer to COLORS on applicable topcoat data sheets for additional information. |
Volume Solids |
58.0 ± 2.0% (mixed) † |
Recommended DFT |
2.0 to 6.0 mils (50 to 150 microns) per coat. Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative. |
Curing Time |
Temperature | To Touch | To Handle | To Recoat | Immersion |
---|
75°F (24°C) | 1 hour | 2-3 hours | 3-4 hours | 3 days | 65°F (18°C) | 2 hours | 4-5 hours | 5-6 hours | 4-5 days | 55°F (13°C) | 3-4 hours | 6-8 hours | 10-12 hours | 6-7 days | 45°F (7°C) | 6-7 hours | 12-14 hours | 16-18 hours | 9-10 days | 35°F (2°C) | 8-10 hours | 16-18 hours | 20-22 hours | 12-14 days |
Curing time varies with surface temperature, air movement, humidity and film thickness. |
Volatile Organic Compounds |
Unthinned: 2.92 lbs/gallon (349 grams/litre) Thinned 5%: 3.11 lbs/gallon (372 grams/litre) Thinned 10%: 3.28 lbs/gallon (393 grams/litre) † |
Theoretical Coverage |
930 mil sq ft/gal (22.8 m²/L at 25 microns). See APPLICATION for coverage rates. † |
Number of Components |
Two: Part A and Part B |
1
Category
No Chemicals Are Assigned To This Category
3
Concentration
Chemical Recommended Use - What is this?
The chemical resistance data listed on this website should only be used for general
reference purposes. Substrates, temperatures, chemical combinations, and other variables
can affect the performance of a coating in chemical exposure. Please contact your
local
to finalize the most appropriate system for your project.
1 Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates to product's performance capabilities only.
2 Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.
|
Recommended Use |
Chemical |
Occasional Contact |
Frequent Contact |
Secondary Containment |
Cargo Immersion |
Immersion Service |
1 Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates to product's performance capabilities only.
2 Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.
- Color cards, swatches and fan decks are offered at no charge, by
request
, for more accurate color selection. Expert custom color matching is also available
by contacting your
Tnemec Coatings Consultant
.
- Deeptone colors may be more expensive than lighter colors. Please contact your
Tnemec Coatings Consultant
to verify product/color availability and pricing.
Products Available In
Tnemec White- Pool P001
Disclaimer
Online color swatches are only digital reproductions of actual standards and will
vary in appearance due to differences in monitor and video card output. These digital
representations should not be used to finalize color selection(s).
Please contact your local
Tnemec Coatings Consultant
for assistance with suitable primer and finish coat selections and color matching.
Only certain products are available in all standard colors. Deeptone colors (i.e.
safety colors, brighter or deeper colors, etc.) shown typically cost more than lighter
colors.
Please contact your local
Tnemec Coatings Consultant
to verify product/color availability and pricing. Select colors and products are
ANSI/NSF certified for potable water. Consult
NSF
or your
Tnemec Coatings Consultant
for a complete listing of certified products.
Tnemec White- Pool|
P001
rgb 248,253,254
These digital colors should not be used to finalize your color selection.
Please read our disclaimer
. Use the color swatch tool on the left to request official color swatches.
(maximum 6 color swatches)
You haven't added any color swatches to your packet. Select some colors now by clicking
a color above and then clicking the 'Request a Swatch' button on the color.
The products listed below are not exact equivalents. They are only products that
you may consider as alternatives in a general sense. Substrate type, condition,
temperatures, surface preparation, primer/topcoat selection and intended use are
just a few factors that will affect product selection. Please contact your local
Tnemec Coatings Consultant
for product recommendations.
This ProductPolyamide Epoxy
|
Volume Solids
|
Rec. DFT
|
V.O.C.
|
# of Components
|
58.0 ± 2.0% (mixed) †
|
2.0 to 6.0 mils (50 to 150 microns) per coat. Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.
|
Unthinned: 2.92 lbs/gallon (349 grams/litre) Thinned 5%: 3.11 lbs/gallon (372 grams/litre) Thinned 10%: 3.28 lbs/gallon (393 grams/litre) †
|
Two: Part A and Part B
|
|
Polyamide Epoxy
Hide this product's
data
|
Volume Solids
|
Rec. DFT
|
V.O.C.
|
# of Components
|
56.0 ± 2.0% (mixed) †
|
2.0 to 6.0 mils (50 to 150 microns) per coat. Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.
|
Unthinned: 3.02 lbs/gallon (362 grams/litre) Thinned 5%: 3.20 lbs/gallon (384 grams/litre) Thinned 10%: 3.37 lbs/gallon (404 grams/litre) †
|
Two: Part A and Part B
|
|