find your coatings consultants
Find and contact a coatings consultant near you.

Series 158 | Bio-Lastic

Generic Type Specialized Waterborne Acrylate
Common Usage A durable coating specially formulated to resist mildew growth on the paint film. Permeable and flexible, it’s capable of bridging cracks and can withstand minor substrate movement, frequent scrubbing and cleaning.
Colors Refer to Tnemec Color Guide.
Finish Matte
Primers Dense Concrete, Masonry, Brick, Plaster, Most Drywall and Wood: Series 151-1051
Porous Concrete and CMU: Series 130 or 1254, followed by 151-1051
Steel, Aluminum and Galvanized Steel: Series 66, L69, L69F, N69, N69F, V69, V69F, 135, 161
Volume Solids 47.0 ± 2.0% †
Recommended DFT 5.5 to 7.5 mils (140 to 190 microns) per coat.
Always apply two coats for a total thickness of 13.0 mils (330 microns) minimum.
Curing Time
Temperature To Touch To Recoat
75°F (24°C)
50% Relative Humidity
1 hour 3 hours
Curing time varies with surface temperature, air movement, humidity and film thickness.
Volatile Organic Compounds Unthinned: 0.42 lbs/gallon (49 grams/litre) †
Theoretical Coverage 754 mil sq ft/gal (18.5 m²/L at 25 microns). Coverage will vary from about 100 to 140 sq ft (9.3 to 13.0 m²) per gallon dependent upon substrate and coating thickness. †
Number of Components One
1
Category
2
Chemical Name(required)
3
Concentration
4
What is this?

Note: Not Recommended (NR), Not Tested (NT), Please Call (PC)

 

Chemical Recommended Use - What is this?

The chemical resistance data listed on this website should only be used for general reference purposes. Substrates, temperatures, chemical combinations, and other variables can affect the performance of a coating in chemical exposure. Please contact your local to finalize the most appropriate system for your project.

Click the following button to download a PDF of the list of chemicals below.

1 Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates    to product's performance capabilities only.

2 Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.


Recommended Use
Chemical Occasional Contact Frequent Contact Secondary Containment Cargo Immersion Immersion Service

1 Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates    to product's performance capabilities only.

2 Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.

  • Color cards, swatches and fan decks are offered at no charge, by request , for more accurate color selection. Expert custom color matching is also available by contacting your Tnemec Coatings Consultant .
  • Deeptone colors may be more expensive than lighter colors. Please contact your Tnemec Coatings Consultant to verify product/color availability and pricing.

Products Available In Vapor Mist 01GR

Vapor Mist| 01GR rgb 211,211,216
Request a Swatch Swatch Unavailable
These digital colors should not be used to finalize your color selection. Please read our disclaimer . Use the color swatch tool on the left to request official color swatches.

Color Swatch Packet

Request another

(maximum 6 color swatches)

You haven't added any color swatches to your packet. Select some colors now by clicking a color above and then clicking the 'Request a Swatch' button on the color.

The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.

This ProductSpecialized Waterborne Acrylate

GET THE LATEST NEWS AND UPDATES BY EMAIL FROM TNEMEC

support documents