find your coatings consultants
Find and contact a coatings consultant near you.

Series 156 | Enviro-Crete

Generic Type Modified Waterborne Acrylate
Common Usage Flexible, breathable coating primarily for concrete and masonry that can fill and bridge minor hairline cracks. Excellent elastomeric protection against driving rain, alternate freezing-thawing and UV light. Series 156 can also be used as a low cohesive stress overcoat for aged oil or alkyd systems.
Colors Refer to Tnemec Color Guide. Series 156 is also available in 01AB Air Barrier Beige.
Finish Matte — Smooth
Primers Concrete, Masonry and Wood: Self-priming or Series 151-1051, 287
Plaster and Stucco: Series 151-1051, 287
Split-Face and Split-Fluted Block: Self-priming or Series 130-6602
Steel: Series 37H, 66, N69, N69F, L69, L69F, 90-97, 94-H2O, 135, L140, L140F
Galvanized Steel & Non-Ferrous Metal: Series 66, L69, L69F, N69, N69F, 135
Other: Series 151 on treated or stained wood, drywall, highly absorbent surfaces and recommended sound existing coatings.
Volume Solids 50.9 ± 2.0% †
Recommended DFT 4.0 to 8.0 mils (100 to 205 microns) per coat.
Curing Time
Temperature To Touch To Handle To Recoat
75°F (24°C)
50% Relative Humidity
1/2 hour 1-2 hours 1 1/4 hours
Curing time varies with surface temperature, air movement, humidity and film thickness.
Volatile Organic Compounds Unthinned- 0.41 lbs/gallon (49 grams/litre) †
Theoretical Coverage 816 mil sq ft/gal (19.9 m²/L at 25 microns).
Actual coverage will vary from about 100 to 200 sq ft (9.3 to 18.6 m²) per gallon dependent upon product, substrate and coating thickness. †
Number of Components One
1
Category
2
Chemical Name(required)
3
Concentration
4
What is this?

Note: Not Recommended (NR), Not Tested (NT), Please Call (PC)

 

Chemical Recommended Use - What is this?

The chemical resistance data listed on this website should only be used for general reference purposes. Substrates, temperatures, chemical combinations, and other variables can affect the performance of a coating in chemical exposure. Please contact your local to finalize the most appropriate system for your project.

Click the following button to download a PDF of the list of chemicals below.

*Results are NOT suitable for direct or indirect food contact. Intended use exposure results relate to product's performance and substrate protection capabilities only.


Recommended Use
Chemical Occasional Contact Frequent Contact Secondary Containment Cargo Immersion Immersion Service
*Results are NOT suitable for direct or indirect food contact. Intended use exposure results relate to product's performance and substrate protection capabilities only.
  • Color cards, swatches and fan decks are offered at no charge, by request , for more accurate color selection. Expert custom color matching is also available by contacting your Tnemec Coatings Consultant .
  • Deeptone colors may be more expensive than lighter colors. Please contact your Tnemec Coatings Consultant to verify product/color availability and pricing.

Products Available In Vapor Mist 01GR

Vapor Mist| 01GR rgb 211,211,216
Request a Swatch Swatch Unavailable
These digital colors should not be used to finalize your color selection. Please read our disclaimer . Use the color swatch tool on the left to request official color swatches.

Color Swatch Packet

Request another

(maximum 6 color swatches)

You haven't added any color swatches to your packet. Select some colors now by clicking a color above and then clicking the 'Request a Swatch' button on the color.

The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.

This ProductModified Waterborne Acrylate
Volume Solids Rec. DFT V.O.C. # of Components
50.9 ± 2.0% † 4.0 to 8.0 mils (100 to 205 microns) per coat. Unthinned- 0.41 lbs/gallon (49 grams/litre) † One
Series 157 | Enviro-Crete Modified Waterborne Acrylate
Hide this product's data
Volume Solids Rec. DFT V.O.C. # of Components
55.5 ± 2.0% † 6.0 to 9.0 mils (150 to 230 microns) per coat. Unthinned - 0.38 lbs/gallon (45 grams/litre) † One