find your coatings consultants
Find and contact a coatings consultant near you.

Series 151-1051 | Elasto-Grip FC

Generic Type Waterborne Modified Polyamine Epoxy
Common Usage Penetrating, flexible and low-odor primer for sealing cementitious and other porous substrates. Also excellent as a tie-coat for specialized finishes over sound existing coatings.
Colors Green
Finish Matte
Topcoats Series 2H, 6, 30, L69, L69F, N69, N69F, V69, V69F, 84, 113, 114, 115, 156, 157, 158, 180, 181, 280, 1028, 1029
Volume Solids 17.0 ± 2.0%
Recommended DFT 0.7 to 1.5 mils (18 to 38 microns) per coat (non-absorbent substrates).
Curing Time
Temperature To Touch To Recoat
75°F (24°C)
50% Relative Humidity
1 1/2 hours 3 1/2 hours minimum
7 days maximum
If more than 7 days have elapsed after applying 151, apply a refresher coat before topcoating. Higher humidities and/or lower temperatures increase the cure time.
Volatile Organic Compounds Unthinned: 1.46 lbs/gallon (175 grams/litre)
Theoretical Coverage 273 mil sq ft/gal (6.7 m²/L at 25 microns). See APPLICATION for coverage rates.
Number of Components Two: Part A and Part B
1
Category
2
Chemical Name(required)
3
Concentration
4
What is this?

Note: Not Recommended (NR), Not Tested (NT), Please Call (PC)

 

Chemical Recommended Use - What is this?

The chemical resistance data listed on this website should only be used for general reference purposes. Substrates, temperatures, chemical combinations, and other variables can affect the performance of a coating in chemical exposure. Please contact your local to finalize the most appropriate system for your project.

Click the following button to download a PDF of the list of chemicals below.

1 Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates    to product's performance capabilities only.

2 Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.


Recommended Use
Chemical Occasional Contact Frequent Contact Secondary Containment Cargo Immersion Immersion Service

1 Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates    to product's performance capabilities only.

2 Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.

  • Color cards, swatches and fan decks are offered at no charge, by request , for more accurate color selection. Expert custom color matching is also available by contacting your Tnemec Coatings Consultant .
  • Deeptone colors may be more expensive than lighter colors. Please contact your Tnemec Coatings Consultant to verify product/color availability and pricing.
These digital colors should not be used to finalize your color selection. Please read our disclaimer . Use the color swatch tool on the left to request official color swatches.

Color Swatch Packet

Request another

(maximum 6 color swatches)

You haven't added any color swatches to your packet. Select some colors now by clicking a color above and then clicking the 'Request a Swatch' button on the color.

The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.

This ProductWaterborne Modified Polyamine Epoxy

GET THE LATEST NEWS AND UPDATES BY EMAIL FROM TNEMEC

support documents