find your coatings consultants
Find and contact a coatings consultant near you.

Series 1402 | ProPolymer

Generic Type Elevated Temperature Vinyl Ester
Common Usage Series 1402 is a food grade, vinyl ester primer for complete FDA-compliant lining systems in concrete, steel or stainless-steel tanks. Fast-cure characteristics allow for quick application of subsequent coats, limiting downtime and facility disruption. Series 1402 is the only approved primer for the ProPolymer food grade product line. Replaces ProPolymer 4808.
Colors 900 Clear
Finish Gloss
Surfacer/Filler/Patcher Series 1402 extended with 211-0211
Intermediate Series 1420, 1422
Topcoats Series 1430, 1432
Volume Solids 85% (mixed). Series 1402 contains a reactive monomer and some loss will occur during application and cure. Actual solids by volume will vary depending upon temperature and air movement.
Recommended DFT 2.0 mils to 6.0 mils (50 microns to 152 microns).
Curing Time
TemperatureTo RecoatImmersion Service
90°F (32°C)2 hours min. 24 hours max.24 hours
70°F (21°C)2 hours min.
24 hours max.
24 hours
Note: If more than 24 hours has elapsed between coats, the Series 1402 surface must be mechanically abraded before topcoating.
Volatile Organic Compounds EPA Method 24
1.67 lbs/gallon (200 grams/litre)
Theoretical Coverage 1,363 mil sq ft/gal (33.4 m²/L at 25 microns). See APPLICATION for coverage rates
Number of Components Two: Part A (base) and Part B (catalyst)
1
Category
2
Chemical Name(required)
3
Concentration
4
What is this?

Note: Not Recommended (NR), Not Tested (NT), Please Call (PC)

 

Chemical Recommended Use - What is this?

The chemical resistance data listed on this website should only be used for general reference purposes. Substrates, temperatures, chemical combinations, and other variables can affect the performance of a coating in chemical exposure. Please contact your local to finalize the most appropriate system for your project.

Click the following button to download a PDF of the list of chemicals below.

1 Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates    to product's performance capabilities only.

2 Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.


Recommended Use
Chemical Occasional Contact Frequent Contact Secondary Containment Cargo Immersion Immersion Service

1 Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates    to product's performance capabilities only.

2 Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.

  • Color cards, swatches and fan decks are offered at no charge, by request , for more accurate color selection. Expert custom color matching is also available by contacting your Tnemec Coatings Consultant .
  • Deeptone colors may be more expensive than lighter colors. Please contact your Tnemec Coatings Consultant to verify product/color availability and pricing.
These digital colors should not be used to finalize your color selection. Please read our disclaimer . Use the color swatch tool on the left to request official color swatches.

Color Swatch Packet

Request another

(maximum 6 color swatches)

You haven't added any color swatches to your packet. Select some colors now by clicking a color above and then clicking the 'Request a Swatch' button on the color.

The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.

This ProductElevated Temperature Vinyl Ester

Spanish version of product datasheet is currently not available.

French version of product datasheet is currently not available.