find your coatings consultants
Find and contact a coatings consultant near you.

Series 130 | Envirofill

Generic Type Waterborne Cementitious Acrylic
Common Usage Exceptional filling capabilities for interior/exterior porous concrete and CMU. Seals and primes surface for application of a variety of high performance water- and solvent-based topcoats in moderately severe exposures.
Colors 130-6602: Off-White
Topcoats Series 6, 66, L69, L69F, N69, N69F, V69, V69F, 84, 104, 113, 114, 151-1051, 156, 157, 158, 161, 180, 201, 270, 275, 280, 287, 1028, 1029
Volume Solids 68.0 ± 2.0% (mixed)
Curing Time
Temperature To Touch To Recoat
75°F (24°C) 1/4 hour 18 hours

Recoat times are dependent on topcoat and environmental conditions.
Curing time varies with surface temperature, air movement, humidity and film thickness.
Volatile Organic Compounds Unthinned: 0.59 lbs/gallon (71 grams/litre)
Thinned 5%: 0.59 lbs/gallon (71 grams/litre)
HAPS Unthinned: 0.42 lbs/gal solids
Thinned 5%:0.42 lbs/gal solids
Theoretical Coverage 1,091 mil sq ft/gal (26.8 m²/L at 25 microns).
Number of Components Three: Part A, Part B and Part C
Chemical Name(required)
What is this?

Note: Not Recommended (NR), Not Tested (NT), Please Call (PC)


Chemical Recommended Use - What is this?

The chemical resistance data listed on this website should only be used for general reference purposes. Substrates, temperatures, chemical combinations, and other variables can affect the performance of a coating in chemical exposure. Please contact your local to finalize the most appropriate system for your project.

Click the following button to download a PDF of the list of chemicals below.

*Results are NOT suitable for direct or indirect food contact. Intended use exposure results relate to product's performance and substrate protection capabilities only.

Recommended Use
Chemical Occasional Contact Frequent Contact Secondary Containment Cargo Immersion Immersion Service
*Results are NOT suitable for direct or indirect food contact. Intended use exposure results relate to product's performance and substrate protection capabilities only.
  • Color cards, swatches and fan decks are offered at no charge, by request , for more accurate color selection. Expert custom color matching is also available by contacting your Tnemec Coatings Consultant .
  • Deeptone colors may be more expensive than lighter colors. Please contact your Tnemec Coatings Consultant to verify product/color availability and pricing.
These digital colors should not be used to finalize your color selection. Please read our disclaimer . Use the color swatch tool on the left to request official color swatches.

Color Swatch Packet

Request another

(maximum 6 color swatches)

You haven't added any color swatches to your packet. Select some colors now by clicking a color above and then clicking the 'Request a Swatch' button on the color.

The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.

This ProductWaterborne Cementitious Acrylic