find your coatings consultants
Find and contact a coatings consultant near you.

Series 115 | Uni-Bond DF

Generic Type Self-crosslinking Hydrophobic Acrylic
Common Usage A high-performance, versatile coating appropriate for a variety of uses including:
Exterior Steel: Waterborne, rust-inhibitive coating with excellent adhesion to organic zinc-rich coatings. Used as a primer or intermediate coat on tanks, vessels and other industrial and architectural metal substrates.
Humid Environments: Primer/finish for two coat applications over prepared galvanized steel and organic zinc-rich coatings in wet, temperature-controlled exposure areas.
Dry Interior Environments: One or two coat, flash-rust and corrosion resistant primer/finish for overheads. Use on prepared carbon and galvanized steel, aluminum, wood and concrete decks, beams, joists and HVAC.
Note: Uni-Bond DF's "dry-fall" characteristics help reduce the potential for overspray problems on buildings and surrounding property.
Colors Refer to Tnemec Color Guide.
Finish Eggshell
Primers Steel: Self-priming or Series 1, 27, 90-97, 90G-1K97, 91-H2O, 94-H2O, 135, 394.
Concrete: Self-priming only.
Intermediate Series 115 may be used as an intermediate coat over 1, 90-97, 91-H2O, 94-H2O or 394. Series 44-900 Adhesion Promoter must be used when topcoating Series 1 or 394 with Series 115.
Topcoats Series 30, 35, 113, 114, 156, 157, 180, 181, 1028 or 1029. Note: When Series 115 is applied over 90-97, 90G-1K97, 91-H2O or 94-H2O, only Series 35, 1028 or 1029 can be used as topcoats.
Volume Solids 44.0 ± 2.0% †
Recommended DFT 2.0 to 4.0 mils (50 to 100 microns) per coat.
Curing Time
Temperature To Handle To Recoat
75°F (24°C) 3 hours 4 hours

Curing time varies with surface temperature, air movement, humidity and film thickness.
Volatile Organic Compounds Unthinned: 1.17 lbs/gallon (140 grams/litre)
Thinned 5%: 1.17 lbs/gallon (140 grams/litre) †
HAPS Unthinned: 0 lbs/gal solids
Thinned 5%: 0 lbs/gal solids
Theoretical Coverage 706 mil sq ft/gal (17.3 m²/L at 25 microns). See APPLICATION for coverage rates. †
Number of Components One
1
Category
2
Chemical Name(required)
3
Concentration
4
What is this?

Note: Not Recommended (NR), Not Tested (NT), Please Call (PC)

 

Chemical Recommended Use - What is this?

The chemical resistance data listed on this website should only be used for general reference purposes. Substrates, temperatures, chemical combinations, and other variables can affect the performance of a coating in chemical exposure. Please contact your local to finalize the most appropriate system for your project.

Click the following button to download a PDF of the list of chemicals below.

*Results are NOT suitable for direct or indirect food contact. Intended use exposure results relate to product's performance and substrate protection capabilities only.


Recommended Use
Chemical Occasional Contact Frequent Contact Secondary Containment Cargo Immersion Immersion Service
*Results are NOT suitable for direct or indirect food contact. Intended use exposure results relate to product's performance and substrate protection capabilities only.
  • Color cards, swatches and fan decks are offered at no charge, by request , for more accurate color selection. Expert custom color matching is also available by contacting your Tnemec Coatings Consultant .
  • Deeptone colors may be more expensive than lighter colors. Please contact your Tnemec Coatings Consultant to verify product/color availability and pricing.

Products Available In Vapor Mist 01GR

Vapor Mist| 01GR rgb 211,211,216
Request a Swatch Swatch Unavailable
These digital colors should not be used to finalize your color selection. Please read our disclaimer . Use the color swatch tool on the left to request official color swatches.

Color Swatch Packet

Request another

(maximum 6 color swatches)

You haven't added any color swatches to your packet. Select some colors now by clicking a color above and then clicking the 'Request a Swatch' button on the color.

The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.

This ProductSelf-crosslinking Hydrophobic Acrylic