find your coatings consultants
Find and contact a coatings consultant near you.

Series 113 | H.B. Tneme-Tufcoat

Generic Type Waterborne Acrylic Epoxy
Common Usage High performance coating suitable for concrete, steel and other commonly used building materials. Features include high-build, low odor, non-yellowing white and fade resistant colors; easy cleanup and stain-, abrasion-, chemical- and moisture-resistance. Good exterior performance.
Colors Refer to Tnemec Color Guide.
Finish Satin
Primers Steel: Series 1, 10, 27, 37H, 66, N69, N69F, 90E-92, 90-97, H90-97, 115, 394, 530. Note: Series 10 and 37H are not recommended for frequently wet conditions. Allow Series 10 to cure one week and 37H to cure 30 days before topcoating. Note: When topcoating Series 1 or 394 with 113, maximum recoat time is three days.
Galvanized Steel and Non-Ferrous Metal: Series 66, N69, N69F, 115
Dense Concrete: Self-priming, Series 130, 218
CMU: Series 54, 130, 218
Drywall: Series 151
Wood: Dry interior environments only, self-priming, Series 10-99W, 151-1051
Volume Solids 44.0 ± 2.0% (mixed) †
Recommended DFT 4.0 to 6.0 mils (100 to 150 microns) per coat. Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.
Curing Time
Temperature To Touch To Handle To Recoat
75°F (24°C) 30-45 minutes 2-3 hours 1-2 hours

Curing time varies with surface temperature, air movement, humidity and film thickness.
Volatile Organic Compounds Unthinned
1.90 lbs/gallon (228 grams/litre)
Thinned 5% (No. 59 Thinner)
2.03 lbs/gallon (243 grams/litre) †
HAPS Unthinned: 2.59 lbs/gal solids
Thinned 5% (No. 59 Thinner): 2.82 lbs/gal solids
Theoretical Coverage 706 mil sq ft/gal (17.3 m²/L at 25 microns). See APPLICATION for coverage rates. †
Number of Components Two: One Part A (4.5 gal) and One Part B (1/2 gal)
1
Category
2
Chemical Name(required)
3
Concentration
4
What is this?

Note: Not Recommended (NR), Not Tested (NT), Please Call (PC)

 

Chemical Recommended Use - What is this?

The chemical resistance data listed on this website should only be used for general reference purposes. Substrates, temperatures, chemical combinations, and other variables can affect the performance of a coating in chemical exposure. Please contact your local to finalize the most appropriate system for your project.

Click the following button to download a PDF of the list of chemicals below.

*Results are NOT suitable for direct or indirect food contact. Intended use exposure results relate to product's performance and substrate protection capabilities only.


Recommended Use
Chemical Occasional Contact Frequent Contact Secondary Containment Cargo Immersion Immersion Service
*Results are NOT suitable for direct or indirect food contact. Intended use exposure results relate to product's performance and substrate protection capabilities only.
  • Color cards, swatches and fan decks are offered at no charge, by request , for more accurate color selection. Expert custom color matching is also available by contacting your Tnemec Coatings Consultant .
  • Deeptone colors may be more expensive than lighter colors. Please contact your Tnemec Coatings Consultant to verify product/color availability and pricing.

Products Available In Vapor Mist 01GR

Vapor Mist| 01GR rgb 211,211,216
Request a Swatch Swatch Unavailable
These digital colors should not be used to finalize your color selection. Please read our disclaimer . Use the color swatch tool on the left to request official color swatches.

Color Swatch Packet

Request another

(maximum 6 color swatches)

You haven't added any color swatches to your packet. Select some colors now by clicking a color above and then clicking the 'Request a Swatch' button on the color.

The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.

This ProductWaterborne Acrylic Epoxy
Volume Solids Rec. DFT V.O.C. # of Components
44.0 ± 2.0% (mixed) † 4.0 to 6.0 mils (100 to 150 microns) per coat. Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative. Unthinned
1.90 lbs/gallon (228 grams/litre)
Thinned 5% (No. 59 Thinner)
2.03 lbs/gallon (243 grams/litre) †
Two: One Part A (4.5 gal) and One Part B (1/2 gal)
Series 114 | H.B. Tneme-Tufcoat Waterborne Acrylic Epoxy
Hide this product's data
Volume Solids Rec. DFT V.O.C. # of Components
42.0 ± 2.0% (mixed) † 4.0 to 6.0 mils (100 to 150 microns) per coat. Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative. Unthinned: 2.04 lbs/gallon (244 grams/litre)
Thinned 5% (No. 59 Thinner): 2.16 lbs/gallon (258 grams/litre) †
Two: One Part A (4.5 gal) and One Part B (1/2 gal)