find your coatings consultants
Find and contact a coatings consultant near you.

Home•products•Series 1095 | Endura-Shield

Series 1095 | Endura-Shield

Generic Type Aliphatic Acrylic Polyurethane
Common Usage A user friendly, low VOC, aliphatic polyurethane coating that provides excellent color and gloss retention for exterior applications to steel, concrete and other miscellaneous substrates.
Colors Refer to Tnemec Color Guide. Note: Certain colors may require multiple coats depending on method of application and finish coat color. When feasible, the preceding coat should be in the same color family, but noticeably different.
Finish Semi-gloss
Primers Steel: Series 1, 20HS, FC20HS, 27WB, 66, 66HS, L69, L69F, N69, N69F, 90-97, 90G-1K97, 91-H2O, 94-H2O, 135, L140, L140F, N140, N140F, V140, V140F, 161, 161HS, 394, 1224
Galvanized Steel & Non-Ferrous Metal: 66, 66HS, L69, L69F, N69, N69F, 161, 161HS
Concrete: Series 27WB, 66, 66HS, L69, L69F, N69, N69F, L140, L140F, N140, N140F, V140, V140F, 161, 161HS, 1254
CMU: Series 1254
Note: The following maximum recoat times apply; Series L69F or L140F, 14 days; Series L69 or L140, 21 days; Series 1, 20HS, FC20HS, 27WB, 66, 66HS, N69, N69F, 135, N140, N140F, V140, V140F, 161, 161HS, 394, 1254, 30 days; Series 90-97, 91-H2O, 90G-1K97, 94-H2O, 60 days. Contact your Tnemec representative for specific recommendations.
Volume Solids 66.0 ± 2.0% (mixed) †
Recommended DFT 2.0 to 5.0 mils (51 to 127 microns) per coat. Note: Number of coats and thickness requirements will vary with substrate, application method and exposure.
Curing Time
TemperatureTo TouchTo HandleTo Recoat
75°F (24°C)1-2 hours9 hours10-12 hours
To resist moisture: 8 hours. Curing time varies with surface temperature, air movement, humidity and film thickness.
Volatile Organic Compounds Unthinned: 1.93 lbs/gallon (232 grams/litre)
Unthinned: 0.73 lbs/gallon (88 grams/litre) (TBAc exempt)
Thinned 15% (No. 10 Thinner): 2.79 lbs/gallon (335 grams/litre)
Thinned 15% (No. 10 Thinner): 1.96 lbs/gallon (234 grams/litre) (TBAc exempt)
Thinned 15% (No. 46 Thinner): 1.99 lbs/gallon (238 grams/litre)
Thinned 15% (No. 46 Thinner): 0.81 lbs/gallon (97 grams/litre) (TBAc exempt)
HAPS Unthinned: 0.00 lbs/gal solids
Thinned 15% (No. 10 Thinner): 0.04 lbs/gal solids
Thinned 15% (No. 46 Thinner): 0.09 lbs/gal solids
Theoretical Coverage 1,059 mil sq ft/gal (26.0 m²/L at 25 microns). See APPLICATION for coverage rates. †
Number of Components Two: Part A and Part B
1
Category
2
Chemical Name(required)
3
Concentration
4
What is this?

Note: Not Recommended (NR), Not Tested (NT), Please Call (PC)

 

Chemical Recommended Use - What is this?

The chemical resistance data listed on this website should only be used for general reference purposes. Substrates, temperatures, chemical combinations, and other variables can affect the performance of a coating in chemical exposure. Please contact your local to finalize the most appropriate system for your project.

Click the following button to download a PDF of the list of chemicals below.

1 Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates    to product's performance capabilities only.

2 Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.


Recommended Use
Chemical Occasional Contact Frequent Contact Secondary Containment Cargo Immersion Immersion Service

1 Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates    to product's performance capabilities only.

2 Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.

  • Color cards, swatches and fan decks are offered at no charge, by request , for more accurate color selection. Expert custom color matching is also available by contacting your Tnemec Coatings Consultant .
  • Deeptone colors may be more expensive than lighter colors. Please contact your Tnemec Coatings Consultant to verify product/color availability and pricing.

Products Available In Grey 1253

Grey| 1253 rgb 128,133,129
Swatch Unavailable
These digital colors should not be used to finalize your color selection. Please read our disclaimer . Use the color swatch tool on the left to request official color swatches.

Color Swatch Packet

Request another

(maximum 6 color swatches)

You haven't added any color swatches to your packet. Select some colors now by clicking a color above and then clicking the 'Request a Swatch' button on the color.

The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.

This ProductAliphatic Acrylic Polyurethane

French version of product datasheet is currently not available.

GET THE LATEST NEWS AND UPDATES BY EMAIL FROM TNEMEC

support documents

featured projects