find your coatings consultants
Find and contact a coatings consultant near you.

Series 1079-0762 | Metallic Clearcoat

Generic Type Aliphatic Acrylic Polyurethane
Common Usage A unique clear coat used to both enhance the finish and extend the long-term weathering qualities of metallic pigmented coatings. Resists most graffiti markings. Where VOC regulations apply, this product can only be sold or used as part of a faux finishing coating system.
Colors Clear
Finish Semi-Gloss
Base Coats Series 1077, 1078. Note: Series 1079-0762 Metallic Clearcoat should be applied within 24 hours of a previous Series 1079-0762 or Series 1078 application and within 21 days of a 1077 application.
Volume Solids 57% ± 2.0% (mixed)
Recommended DFT 1.0 to 2.0 mils (25 to 50 microns) per coat.
Curing Time
TemperatureTo TouchTo HandleMinimum To RecoatMaximum To Recoat†
75°F (24°C)1-2 hours 7-8 hours8 hours24 hours
To resist moisture condensation: 6 hours.
Curing time varies with surface temperature, air movement, humidity and film thickness.
† If exceeded, scarify before applying an additional coat.
Volatile Organic Compounds Unthinned: 2.00 lbs/gallon (240 grams/litre)
Thinned 5% (No. 49 Thinner): 2.00 lbs/gallon (240 grams/litre)
Thinned 5% (No. 2 Thinner): 2.31 lbs/gallon (277 grams/litre)
Thinned 10% (No. 2 Thinner): 2.59 lbs/gallon (310 grams/litre)
Theoretical Coverage 914 mil sq ft2/gal (22.4 m²/L at 25 microns). See APPLICATION for coverage rates.
Number of Components Three: Part A, Part B and Part C
1
Category
2
Chemical Name(required)
3
Concentration
4
What is this?

Note: Not Recommended (NR), Not Tested (NT), Please Call (PC)

 

Chemical Recommended Use - What is this?

The chemical resistance data listed on this website should only be used for general reference purposes. Substrates, temperatures, chemical combinations, and other variables can affect the performance of a coating in chemical exposure. Please contact your local to finalize the most appropriate system for your project.

Click the following button to download a PDF of the list of chemicals below.

1 Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates    to product's performance capabilities only.

2 Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.


Recommended Use
Chemical Occasional Contact Frequent Contact Secondary Containment Cargo Immersion Immersion Service

1 Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates    to product's performance capabilities only.

2 Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.

  • Color cards, swatches and fan decks are offered at no charge, by request , for more accurate color selection. Expert custom color matching is also available by contacting your Tnemec Coatings Consultant .
  • Deeptone colors may be more expensive than lighter colors. Please contact your Tnemec Coatings Consultant to verify product/color availability and pricing.
These digital colors should not be used to finalize your color selection. Please read our disclaimer . Use the color swatch tool on the left to request official color swatches.

Color Swatch Packet

Request another

(maximum 6 color swatches)

You haven't added any color swatches to your packet. Select some colors now by clicking a color above and then clicking the 'Request a Swatch' button on the color.

The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.

This ProductAliphatic Acrylic Polyurethane

French version of product datasheet is currently not available.

GET THE LATEST NEWS AND UPDATES BY EMAIL FROM TNEMEC

support documents