find your coatings consultants
Find and contact a coatings consultant near you.

Series 1077 | Enduralume

Generic Type Aliphatic Acrylic Polyurethane
Common Usage An acrylic polyurethane finish coat that contains a sparkle aluminum pigment creating a metallic aesthetic finish. It is a highly durable coating that is resistant to abrasion, wet conditions and exterior weathering. This high performance finish contains UV absorbers for extended color and gloss retention. NOT FOR IMMERSION SERVICE.
Colors Available in 42 standard colors. Refer to Tnemec Metallic Color Guide. Certain colors may require a clear topcoat for optimum performance. Note: Variations in appearance between product samples, color cards, color sheets and actual field applications should be expected due to differences in environmental conditions, color of underlying coats, gloss level, orientation of metallic pigment, equipment and applicator technique. Reference Technical Bulletin No. 07-65 for more information.
Finish Semi-gloss
Primers Steel: Series 1, 20, 27, 66, L69, N69, 84, 90-97, 91-H20, 104, 135, L140, N140, 161, 394, 530
Galvanized Steel and Non-Ferrous Metal: Series 27, 66, L69, N69, 161
Note: Series 530 exterior exposed more than 24 hours, Series 104 or 135 exterior exposed more than two months, or Series L69, N69, 84, L140 or N140 exterior exposed more than three months must first be scarified or reprimed with themselves. Brush blasting with fine abrasive is the preferred method of scarification.
Topcoats Series 1079, optional when extended weatherability is desired.
Volume Solids 56.0 ± 2.0% (mixed) †
Recommended DFT 2.0 to 3.0 mils (50 to 75 microns) per coat. Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.
Curing Time
Temperature To Touch To Handle To Recoat
75°F (24°C) 1 hour 5-8 hours 12 hours
Curing time varies with surface temperature, air movement, humidity and film thickness.
Volatile Organic Compounds Unthinned: 3.34 lbs/gallon (400 grams/litre)
Thinned 14% (No. 42 Thinner): 3.75 lbs/gallon (449 grams/litre)
Thinned 15% (No. 39 Thinner): 3.72 lbs/gallon (445 grams/litre) †
HAPS 1.42 lbs/gal solids
Theoretical Coverage 898 mil sq ft/gal (22.0 m²/L at 25 microns). †
Number of Components Two: Part A and Part B
Chemical Name(required)
What is this?

Note: Not Recommended (NR), Not Tested (NT), Please Call (PC)


Chemical Recommended Use - What is this?

The chemical resistance data listed on this website should only be used for general reference purposes. Substrates, temperatures, chemical combinations, and other variables can affect the performance of a coating in chemical exposure. Please contact your local to finalize the most appropriate system for your project.

Click the following button to download a PDF of the list of chemicals below.

*Results are NOT suitable for direct or indirect food contact. Intended use exposure results relate to product's performance and substrate protection capabilities only.

Recommended Use
Chemical Occasional Contact Frequent Contact Secondary Containment Cargo Immersion Immersion Service
*Results are NOT suitable for direct or indirect food contact. Intended use exposure results relate to product's performance and substrate protection capabilities only.
  • Color cards, swatches and fan decks are offered at no charge, by request , for more accurate color selection. Expert custom color matching is also available by contacting your Tnemec Coatings Consultant .
  • Deeptone colors may be more expensive than lighter colors. Please contact your Tnemec Coatings Consultant to verify product/color availability and pricing.
These digital colors should not be used to finalize your color selection. Please read our disclaimer . Use the color swatch tool on the left to request official color swatches.

Color Swatch Packet

Request another

(maximum 6 color swatches)

You haven't added any color swatches to your packet. Select some colors now by clicking a color above and then clicking the 'Request a Swatch' button on the color.

The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.

This ProductAliphatic Acrylic Polyurethane


support documents