||Advanced Thermoset Solution Fluoropolymer
||A high-solids fluoropolymer coating that provides an ultra-durable finish with user friendly brush, roll and conventional spray application. It has outstanding color and gloss retention even in the most severe exposures. Under certain conditions, it may be used to restore aged fluoropolymer coil applied coatings. Contact Tnemec Technical Services or your local Tnemec representative for details.
||Refer to Tnemec Color Guide. Note: Certain colors may require multiple coats depending on method of application and finish coat color. The preceding coat should be in the same color family, but noticeably different. Upon selection of the finish coat color (Series 1071), the intermediate coat color will be selected by Tnemec's color lab.
||Series 1, 27, 66, L69, L69F, N69, N69F, V69, V69F, 90-97, H90-97, 91-H2O, 94-H2O, 135, 161, 394. Note: Series 1 and 394 require an intermediate coat prior to topcoating with Series 1071.
||Series 73, 750, 1075, 1075U (Intermediate coat may be required for some applications, please contact Tnemec.) Note: When topcoating with Series 1071, the following maximum recoat times apply: Over 27, 66, L69, L69F, N69, N69F, V69, V69F, 135 or 161, 14 days; over itself, 30 days; over 750, 45 days; over 73, 90-97, 91-H2O, 94-H2O, 1075 and 1075U, 90 days.
||60.0 ± 2.0% (mixed) †
||2.0 to 3.0 mils (50 to 75 microns) per coat. Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.
‡ Maximum recoat: 30 days. Curing time varies with surface temperature, air movement, humidity and film thickness. Note: For faster curing and low-temperature applications, add No. 44-710 Urethane Accelerator; see separate product data sheet.
|Temperature || To Touch || To Handle || Minimum Recoat ‡|
| 90°F (32°C) || 10 minutes || 4 hours || 5-8 hours |
| 70°F (21°C) || 30 minutes || 6-8 hours || 10-12 hours |
| 50°F (10°C) || 1 hour || 12-15 hours || 16-24 hours |
|Volatile Organic Compounds
||EPA Method 24 †. Unthinned: 2.65 lbs/gallon (317 grams/litre)
Thinned 5% (No. 63 Thinner): 2.82 lbs/gallon (338 grams/litre)
||Unthinned: 3.93 lbs/gal solids
||962 mil sq ft/gal (23.6 m²/L at 25 microns). †
|Number of Components
||Two: Part A and Part B