Series 1070V | Fluoronar

Generic Type Advanced Thermoset Solution Fluoropolymer
Common Usage A low VOC, fluoropolymer coating that provides an ultra-durable finish with user friendly brush, roll and conventional spray application. It has outstanding color and gloss retention even in the most severe exposures. Under certain conditions, it may be used to restore aged fluoropolymer coil applied coatings or for OEM applications. Contact Tnemec Technical Services or your local Tnemec representative for details.
Colors Refer to Tnemec Color Guide. Note: Certain colors may require multiple coats depending on method of application and finish coat color. The preceding coat should be in the same color family, but noticeably different. Upon selection of the finish coat color, the intermediate coat color will be selected by Tnemec's color lab.
Finish Gloss
Primers Series 1, 27, L69, L69F, N69, N69F, V69, V69F, 90-97, H90-97, 91-H2O, 94-H2O, 135, 394. Note: Series 1 and 394 require an intermediate coat prior to topcoating with Series 1070V.
Intermediate Series 73, 750, 1075, 1075U. (Intermediate coat may be required for some applications, please contact your Tnemec coating consultant.) Note: When topcoating with Series 1070V, the following maximum recoat times apply: Over 27, L69, L69F, N69, N69F, V69, V69F or 135, 14 days; over itself, 30 days; over 750, 1075 or 1075U, 45 days; over 73, 90-97, H90-97, 91-H2O or 94-H2O, 90 days.
Volume Solids 56.0 ± 2.0% (mixed) †
Recommended DFT 2.0 to 3.0 mils (50 to 75 microns) per coat. Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.
Curing Time
TemperatureTo TouchTo HandleMinimum Recoat ‡
90°F (32°C)30 minutes4-6 hours8-10 hours
70°F (21°C)30 minutes6-8 hours12-16 hours
50°F (10°C)30 minutes12-16 hours16-20 hours
‡ Maximum recoat: 30 days. Curing time varies with surface temperature, air movement, humidity and film thickness. Note: For faster curing and low-temperature applications, add No. 44-710 Urethane Accelerator; see separate product data sheet.
Volatile Organic Compounds Unthinned: 0.83 lbs/gallon (99 grams/litre)
Thinned 10% (No. 65 Thinner): 0.83 lbs/gallon (99 grams/litre)
Thinned 10% (No. 63 Thinner): 1.60 lbs/gallon (192 grams/litre) (TBAc Exempt)
Thinned 8% (No. 63 Thinner): 2.07 lbs/gallon (248 grams/litre) (TBAc Non-Exempt) †
Theoretical Coverage 898 mil sq ft/gal (22.0 m²/L at 25 microns) †
Number of Components Two: Part A and Part B

Email this product

Series 1070V Fluoronar was chosen for the Great America Place Trellis in Santa Clara, CA because of its low-VOC and protection properties.

Support Documents

View all support documents