Series 1028 | Enduratone

Generic Type HDP Acrylic Polymer
Common Usage Water-based, low VOC, High Dispersion Pure acrylic polymer coating providing excellent long term protection in both interior/exterior exposures. May be applied by spray, brush or roller over a variety of solvent and waterborne steel primers. May also be used over many aged coatings. It is mildew resistant and exhibits very good gloss and color stability. Application methods include "dry-fall" under certain conditions (See Application). Note: Series 1028's "dry-fall" characteristics help to reduce the potential for overspray problems on buildings and surrounding property.
Colors Refer to Tnemec Color Guide. Note: Certain colors may require multiple coats depending on method of application and finish coat color. When feasible, the preceding coat should be in the same color family (blue, gray, etc.), but noticeably different.
Finish Gloss - Note: Final gloss level of topcoat can vary depending on number of coats applied. One coat will generally result in a lower sheen than two coats of the material.
Primers Wood: Series 10-99W, V10-99W or 151-1051
Steel: Series 1, 10, 22, 30, 37H, 66, L69, L69F, N69, N69F, V69, V69F, 90-97, 90G-1K97, 91-H2O, 94-H2O, 113, 115, 135, L140, L140F, N140, N140F, V140, V140F, 141, 161, 287, 394. Note: Allow Series 10, V10 and 37H to cure three days before topcoating. Additionally, Series 1, 90-97, 90G-1K97, 91-H2O, 94-H2O and 394 must be exterior exposed for three days prior to topcoating. Note: This product exhibits direct-to-metal capabilities for dry interior environments. Contact Tnemec Technical Service for more information.
Aluminum & Galvanized: Series 66, L69, L69F, N69, N69F, V69, V69F, 115, 135
Concrete: Self-priming or Series 6, 54, 66, L69, L69F, N69, N69F, V69, V69F, 130, 151, 156, 180, 287, 1254
CMU: Series 54, 130, 1254
Drywall: Series 51, 151-1051, 287
Topcoats Series 1029, 1080, 1081
Volume Solids 40.0 ± 2.0% †
Recommended DFT 2.0 to 3.0 mils (50 to 75 microns) per coat.
Curing Time
Temperature To Touch To Handle To Recoat To Resist Moisture
75°F (24°C) 30 minutes 2 hours 2 hours 6 hours
Curing time varies with surface temperature, air movement, humidity and film thickness.
Volatile Organic Compounds Unthinned: 0.79 lbs/gallon (94 grams/litre)
Thinned 5%: 0.79 lbs/gallon (94 grams/litre) †
HAPS Unthinned: 0.35 lbs/gal solids
Thinned 5%: 0.35 lbs/gal solids
Theoretical Coverage 633 mil sq ft/gal (15.5 m²/L at 25 microns). See APPLICATION for coverage rates. †
Number of Components One

The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.

This ProductHDP Acrylic Polymer
Volume SolidsRec. DFTV.O.C.# of Components
40.0 ± 2.0% †2.0 to 3.0 mils (50 to 75 microns) per coat.Unthinned: 0.79 lbs/gallon (94 grams/litre)
Thinned 5%: 0.79 lbs/gallon (94 grams/litre) †		One
Series 30 | Spra-Saf EN Hydrophobic Acrylic Polymer
Hide this product's data
Volume SolidsRec. DFTV.O.C.# of Components
38.0 ± 2.0% †2.0 to 4.0 mils (50 to 100 microns) per coat. Note: Number of coats required will vary depending on color, substrate (surface) and other variables. Contact your Tnemec representative.Unthinned: 1.60 lbs/gallon (192 grams/litre)
Thinned 5%: 1.60 lbs/gallon (192 grams/litre) †		One
Series 1029 | Enduratone HDP Acrylic Polymer
Hide this product's data
Volume SolidsRec. DFTV.O.C.# of Components
40.0 ± 2.0% †2.0 to 3.0 mils (50 to 75 microns) per coat.Unthinned: 0.79 lbs/gallon (94 grams/litre)
Thinned 5%: 0.79 lbs/gallon (94 grams/litre) †		One

Email this product

Series 1028 Enduratone provides exterior protection at the Plains All American Pipeline facility.

Support Documents