find your coatings consultants
Find and contact a coatings consultant near you.

Series 10 | Tnemec Primers

Generic Type Modified Alkyd
Common Usage Chemically active, rust-inhibitive primer for ferrous metals. Provides extended weathering for shop and field priming of structural and miscellaneous steel. Series 10-99W can also be used as a primer for wood substrates.
Colors 99 Red, 1009 Gray, 99G Green, 99B Black, 99W White. Note: Minimum order quantities apply for 99G Green and 99B Black.
Topcoats Series 2H, 2HS, 6, 30, 82HS, 113, 114, 115, 1028, 1029. Note: Some systems are not for use on surfaces that are continually wet or sweat frequently. Reference the applicable topcoat data sheet for additional information.
Note: Series 10 and V10 must cure three days before topcoating with Series 1028 or 1029.
Note: For field touch-up and VOC restricted areas, use Series V10.
Volume Solids 56.0 ± 2.0% †
Recommended DFT 2.0 to 3.5 mils (50 to 90 microns) per coat.
Curing Time
Temperature To Handle To Recoat
99, 99B
99G, 1009
75°F (24°C)2-4 hours12 hours
99W75°F (24°C)3-5 hours12 hours
Curing time varies with surface temperature, air movement, humidity and film thickness.
Volatile Organic Compounds Unthinned: 2.98 lbs/gallon (357 grams/litre)
Thinned 10%: 3.30 lbs/gallon (395 grams/litre) †
HAPS Unthinned: 0 lbs/gal solids
Thinned 10%: 0 lbs/gal solids
Theoretical Coverage 898 mil sq ft/gal (22.0 m²/L at 25 microns). See APPLICATION for coverage rates. †
Number of Components One
1
Category
2
Chemical Name(required)
3
Concentration
4
What is this?

Note: Not Recommended (NR), Not Tested (NT), Please Call (PC)

 

Chemical Recommended Use - What is this?

The chemical resistance data listed on this website should only be used for general reference purposes. Substrates, temperatures, chemical combinations, and other variables can affect the performance of a coating in chemical exposure. Please contact your local to finalize the most appropriate system for your project.

Click the following button to download a PDF of the list of chemicals below.

*Results are NOT suitable for direct or indirect food contact. Intended use exposure results relate to product's performance and substrate protection capabilities only.


Recommended Use
Chemical Occasional Contact Frequent Contact Secondary Containment Cargo Immersion Immersion Service
*Results are NOT suitable for direct or indirect food contact. Intended use exposure results relate to product's performance and substrate protection capabilities only.
  • Color cards, swatches and fan decks are offered at no charge, by request , for more accurate color selection. Expert custom color matching is also available by contacting your Tnemec Coatings Consultant .
  • Deeptone colors may be more expensive than lighter colors. Please contact your Tnemec Coatings Consultant to verify product/color availability and pricing.

Products Available In Red 99

Red| 99 rgb 106,79,70
Swatch Unavailable
These digital colors should not be used to finalize your color selection. Please read our disclaimer . Use the color swatch tool on the left to request official color swatches.

Color Swatch Packet

Request another

(maximum 6 color swatches)

You haven't added any color swatches to your packet. Select some colors now by clicking a color above and then clicking the 'Request a Swatch' button on the color.

The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.

This ProductModified Alkyd
Volume Solids Rec. DFT V.O.C. # of Components
56.0 ± 2.0% † 2.0 to 3.5 mils (50 to 90 microns) per coat. Unthinned: 2.98 lbs/gallon (357 grams/litre)
Thinned 10%: 3.30 lbs/gallon (395 grams/litre) †
One
Series 37H | Chem-Prime H.S. Phenolic Alkyd
Hide this product's data
Volume Solids Rec. DFT V.O.C. # of Components
58.0 ± 2.0% † 2.0 to 3.5 mils (50 to 90 microns) per coat. Unthinned: 2.91 lbs/gallon (348 grams/litre)
Thinned 4%: 3.07 lbs/gallon (368 grams/litre)
Thinned 9%: 3.27 lbs/gallon (391 grams/litre) †
One
Series V10 | Tnemec Primers Modified Alkyd
Hide this product's data
Volume Solids Rec. DFT V.O.C. # of Components
57 ± 2.0% 2.0 to 3.5 mils (50 to 90 microns) per coat. Unthinned: 2.80 lbs/gallon (335 grams/litre)
Thinned 1%: 2.84 lbs/gallon (340 grams/litre)
One
Series 88HS | Azeron H.S. Primer Modified Short Oil Alkyd
Hide this product's data
Volume Solids Rec. DFT V.O.C. # of Components
60.0 ± 2.0% † 2.0 to 3.5 mils (50 to 90 microns) per coat. Unthinned: 2.69 lbs/gallon (322 grams/litre)
Thinned 2%: 2.78 lbs/gallon (333 grams/litre) †
One

GET THE LATEST NEWS AND UPDATES BY EMAIL FROM TNEMEC