Below is only a summary of product data. Please download the product datasheet for complete details. English: Product Data MSDS Spanish: MSDS French: MSDS
| Generic Type | Modified Aromatic Polyurethane Primer | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Common Usage | A single component, moisture-cured resin, containing a proprietary blend of micaceous iron oxide and zinc to function as a primer which is field and shop friendly. May be used in OEM manufacturing, potable water and wastewater immersion with the proper topcoats. May also be used for marginally prepared rusty steel and tightly adhering old coatings for non-immersion maintenance situations. | ||||||||||||||||
| Colors | 1216 Grayish-Green | ||||||||||||||||
| Surfacer/Filler/Patcher | Series 218, 219. For additional information contact Tnemec Technical Services. | ||||||||||||||||
| Primers | Self-priming, 90-97, 91-H2O, 94-H2O | ||||||||||||||||
| Topcoats | Series 1 may be topcoated with a multitude of high performance coatings which include (but are not limited to) Series 1, 20, FC20, 25, 27, 35, 46H-413, 66, N69, N69F, 73, 104, 113, 114, 115, N140, N140F, 161, 400, 406, 1028, 1029, 1074, 1075. Note: If Series 1 is exterior exposed for 1 year or more it must be scarified or recoated with itself before topcoating. Scarification or recoating with itself is required if the Series 1 has been exterior exposed for 3 days or longer and Series 113 is the specified topcoat. Note: Series 25, 35 and 115 require the use of Series 44-900 adhesion promoter when topcoating Series 1. Note: Certain topcoat colors may not provide one coat hiding depending on method of application. Contact your Tnemec representative. |
||||||||||||||||
| Volume Solids | 61.0 ± 2.0% (mixed) | ||||||||||||||||
| Recommended DFT | 2.5 to 3.5 mils (65 to 90 microns) per coat. Note: NSF certification maximum: 3.5 mils. | ||||||||||||||||
| Curing Time | Without 44-710
† 50% Relative Humidity. Curing time will vary with surface temperature, humidity and film thickness. Note: When recoating Series 1 with topcoats other than itself, the minimum recoat time is 16 hours. Ventilation: When used in enclosed areas, provide adequate ventilation during application and cure. With 44-710: The use of 44-710 can greatly reduce recoat times. Reference the 44-710 Urethane Accelerator product data sheet. Note: Series 44-710 Accelerator must be used when the surface temperature falls below 50°F (10°C). |
||||||||||||||||
| Volatile Organic Compounds | Unthinned: 2.79 lbs/gallon (334 grams/litre) Thinned 10% (No. 2 or 3 Thinner): 3.20 lbs/gallon (383 grams/litre) Thinned 10% (No. 49 Thinner): 2.79 lbs/gallon (334 grams/litre) |
||||||||||||||||
| HAPS | Unthinned: 0.00 lbs/gal solids Thinned 10% (No. 2 Thinner): 1.19 lbs/gal solids Thinned 10% (No. 3 Thinner): 0.04 lbs/gal solids Thinned 10% (No. 49 Thinner): 0.00 lbs/gal solids |
||||||||||||||||
| Theoretical Coverage | 978 mil sq ft/gal (24.0 m²/L at 25 microns). See APPLICATION for coverage rates. | ||||||||||||||||
| Number Of Components | One |
The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.
| This ProductModified Aromatic Polyurethane Primer | ||||||||
|
||||||||
Moisture-Cured Aromatic Urethane
|
||||||||
|
Omnithane used at the CNY parking garage in Syracuse, NY