Below is only a summary of product data. Please download the product datasheet for complete details. English: Product Data MSDS Spanish: Product Data MSDS French: Product Data MSDS
| Generic Type | Aliphatic Polyester Polyurethane | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Common Usage | Extremely hard, chemical-resistant polyurethane floor coating with superb flow characteristics. Excellent resistance to abrasion, wet conditions, corrosive fumes and chemical contact. Gloss and color retention among the best of air dried finishes. Note: For horizontal surfaces only. | ||||||||
| Colors | Available in the 16 standard StrataShield colors and limited custom colors. Contact Tnemec Company for availability. Note: Certain colors may require multiple coats depending on method of application and finish coat color. When feasible, the preceding coat should be in the same color family (blue, gray, etc.), but noticeably different. | ||||||||
| Finish | Gloss | ||||||||
| Primers | Horizontal Concrete: Series 201, 205, 280, 281, 287. | ||||||||
| Intermediate | Series 104, 205, 210, 237, 238, 239, 280, 281, 287 Note: Before topcoating with Series 291, any Tnemec epoxy exterior exposed for more than three weeks must be scarified or reprimed with itself. Mechanically abrading or power-sanding is the preferred method of scarification. The maximum recoat time of Series 210, 237, 238, 239, 280 and 281 is 24 hours. Refer to those product data sheets for more information. |
||||||||
| Volume Solids | 62% ± 2.0% (mixed) † | ||||||||
| Recommended DFT | 2.0 to 3.0 mils (50 to 75 microns) per coat. Note: Number of coats will vary depending on color, substrate (surface) and other variables. Contact your Tnemec representative. | ||||||||
| Curing Time |
Curing time varies with surface temperature, air movement, humidity and film thickness. Note: If more than 48 hours have elapsed between coats, the coated surface must be mechanically abraded before topcoating. |
||||||||
| Volatile Organic Compounds | Unthinned: 2.91 lbs/gallon (348 grams/litre) Thinned 15%: 3.34 lbs/gallon (401 grams/litre) † |
||||||||
| Theoretical Coverage | 994 mil sq ft/gal (24.4 m²/L at 25 microns). See APPLICATION for coverage rates. † | ||||||||
| Number of Components | Two: Part A and Part B (2.5 Parts A to 1 Part B by volume) |
The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.
| This ProductAliphatic Polyester Polyurethane | ||||||||
|
||||||||
Aliphatic Polyester Polyurethane
|
||||||||
|
The chemical resistance data listed on this website should only be used for general reference purposes. Substrates, temperatures, chemical combinations, and other variables can affect the performance of a coating in chemical exposure. Please contact your local Tnemec Coatings Consultant to finalize the most appropriate system for your project.
*Results are NOT suitable for direct or indirect food contact. Intended use exposure results relate to product's performance and substrate protection capabilities only.
| Chemical | Recommended Use |
|---|---|
| Acetaldehyde | NT |
| Acetic Acid (10%) | SC, FC, OC |
| Acetic Acid (30%) | FC, OC |
| Acetic Acid, Glacial | FC, OC |
| Acetic Anhydride | FC, OC |
| Acetone | FC, OC |
| Acetyl Chloride | NT |
| Acrylic Acid | NT |
| Acrylonitrile | NR |
| Adipic Acid (25%) | SC, FC, OC |
| Allyl Alcohol | FC, OC |
| Allyl Chloride | NR |
| Aluminum Bromide | SC, FC, OC |
| Aluminum Chloride | SC, FC, OC |
| Aluminum Nitrate (50%) | SC, FC, OC |
| Aluminum Sulfate (49%) | SC, FC, OC |
| Ammonium Bisulfite | SC, FC, OC |
| Ammonium Chloride | SC, FC, OC |
| Ammonium Fluoride | SC, FC, OC |
| Ammonium Hydroxide (20%) | SC, FC, OC |
| Ammonium Hydroxide (30%) | SC, FC, OC |
| Ammonium Lauryl Sulfate (30%) | SC, FC, OC |
| Ammonium Nitrate | SC, FC, OC |
| Ammonium Persulfate | FC, OC |
| Ammonium Sulfate | FC, OC |
| Ammonium Sulfide | FC, OC |
| Ammonium Sulfite | FC, OC |
| Ammonium Xylene Sulfonate (40%) | FC, OC |
| Amyl Acetate | FC, OC |
| Amyl Alcohol | FC, OC |
| Aniline | NR |
| Aniline Hydrochloride | NT |
| Antimony Chloride (tri) | NT |
| Aqua Ammonia | SC, FC, OC |
| Aqua Regia | FC, OC |
| Arsenous Acid | FC, OC |
| Barium Chloride (50%) | FC, OC |
| Barium Hydroxide (50%) | FC, OC |
| Barium Sulfate | FC, OC |
| Barium Sulfide | FC, OC |
| Beer* | NT |
| Benzal Chloride | FC, OC |
| Benzaldehyde | FC, OC |
| Benzene | FC, OC |
| Benzene Sulfonic Acid | NT |
| Benzene Thiol | NT |
| Boric Acid (5%) | FC, OC |
| Bromine (5%) | NT |
| Bromine Gas (Dry) | FC, OC |
| Bromine Gas (Wet) | FC, OC |
| Butyl Acid Levulinic | FC, OC |
| Butyl Acrylate | NT |
| Butyl Amine | FC, OC |
| Butyl Ether | FC, OC |
| Butyric Acid | FC, OC |
| Cadmium Chloride | FC, OC |
| Cadmium Plating (Cyanide) | FC, OC |
| Calcium Bisulfite | FC, OC |
| Calcium Chloride (50%) | FC, OC |
|
Calcium Hydroxide (30%)
Also Known As: Lime Slurry |
FC, OC |
| Calcium Hypochlorite (5%) | FC, OC |
| Calcium Nitrate | SC, FC, OC |
| Calcium Nitrite | NT |
| Calcium Sulfate | SC, FC, OC |
| Calcium Sulfite | SC, FC, OC |
| Caprylic Acid (Octanoic Acid) | SC, FC, OC |
| Carbon Bisulfide (Di) Fumes (wet) | NT |
| Carbon Dioxide | FC, OC |
| Carbon Tetrachloride | SC, FC, OC |
| Castor Oil | SC, FC, OC |
| Chloracetic Acid (20%) | NT |
| Chlorine Dioxide | NT |
| Chloroacetic Acid (20-50%) | NT |
| Chloroacetic Acid (50-100%) | NT |
| Chlorobenzene | FC, OC |
| Chlorobutane | FC, OC |
| Chloroform | NT |
| Chlorophenol | NT |
| Chlorosulfonic Acid | NT |
| Chlorotoluene | NT |
| Chromic Acid (10%) | FC, OC |
| Chromic Chloride | FC, OC |
| Citric Acid (=< 50%) | FC, OC |
| Copper Chloride | SC, FC, OC |
| Copper Nitrate | SC, FC, OC |
| Copper Plating (Acid) | SC, FC, OC |
| Copper Plating (Cyanide) | SC, FC, OC |
| Copper Sulfate (10%) | SC, FC, OC |
| Copper Sulfate (20%) | SC, FC, OC |
| Copper Sulfate (50%) | SC, FC, OC |
| Copper Sulfate (dry) | SC, FC, OC |
| Corn Oil* | FC, OC |
| Cottonseed Oil* | SC, FC, OC |
| Cresol | FC, OC |
| Cresylic Acid | FC, OC |
| Crude Oil (Sour) | FC, OC |
| Cumene | FC, OC |
| Cyclohexane | FC, OC |
| Cyclohexanone | FC, OC |
| Cymene | FC, OC |
*Results are NOT suitable for direct or indirect food contact. Intended use exposure results relate to product's performance and substrate protection capabilities only.
The Winfield Fire Department in Kansas chose a topcoat of Series 291 CRU for its color and gloss retention properties.