find your coatings consultants
Find and contact a coatings consultant near you.

Series 280 | Tneme-Glaze

Generic Type Modified Polyamine Epoxy
Common Usage A glaze-like corrosion resistant coating for walls, ceilings, floors and other surfaces; resistant to frequent pressurized hot water and detergent cleaning. Used as a topcoat/sealer for heavy duty wall and floor systems or in a stand-alone high-performance function. Excellent chemical, stain- and abrasion-resistance for a variety of substrates.
Colors Available in the 16 standard StrataShield colors. Special colors available, please contact your Tnemec representative. Note: Epoxies chalk and yellow with age, extended exposure to UV and artificial lighting. Caution should be taken when selecting white and light pastel colors. Lack of ventilation, incomplete mixing, miscatalyzation or the use of heaters that emit carbon dioxide and carbon monoxide during application and initial stages of curing may cause amine blush, possibly affecting adhesion of subsequent topcoats.
Finish Gloss. (Roller application provides an orange peel finish.)
Surfacer/Filler/Patcher Series 130, 215, 218, 1254. Note: A repair kit of 201, 208 or 233 mixed with fumed silica, is available for small patching/surfacing repairs. For more extensive repairs and additional information, contact your Tnemec representative or Tnemec Technical Services.
Primers Concrete: Self-priming or Series 27WB, 201, 205, 208, 233, 237, 238, 241.
CMU: Self-priming over filled CMU
Wall board, Wood & Drywall: Self-priming or Series 151, 201, 233. Note: For taping joints on drywall, use a high quality compound such as Sheetrock brand Durabond 90.
Intermediate Series 206, 210, 233, 237, 237SC, 238, 241, 242, 245, 270, 273, 280
Topcoats Series 73, 247, 248, 280, 290, 291, 297, 1074, 1075, 1080, 1081
Volume Solids 100% (mixed) †
Recommended DFT Horizontal: 6.0 to 12.0 mils (150 to 305 microns) per coat.
Vertical: 4.0 to 8.0 mils (100 to 205 microns) per coat
Additional coats may be required for appearance or hiding.
Curing Time
Temperature To Topcoat To Place in Service
75°F (24°C) 8-24 hours 24 hours
Note: If more than 24 hours have elapsed between coats, the coated surface must be mechanically abraded before topcoating.
Volatile Organic Compounds Unthinned: 0.19 lbs/gallon (22 grams/litre)
Thinned 5% (No. 2 Thinner): 0.52 lbs/gallon (63 grams/litre)
Thinned 5% (No. 42 Thinner): 0.50 lbs/gallon (59 grams/litre) †
Theoretical Coverage 1,604 mil sq ft/gal (39.4 m²/L at 25 microns). See APPLICATION for coverage rates. †
Number of Components Two: Part A and Part B (2 Parts A to 1 Part B by volume)

Chemical Recommended Use - What is this?

The chemical resistance data listed on this website should only be used for general reference purposes. Substrates, temperatures, chemical combinations, and other variables can affect the performance of a coating in chemical exposure. Please contact your local to finalize the most appropriate system for your project.

Click the following button to download a PDF of the list of chemicals below.

1 Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates    to product's performance capabilities only.

2 Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.


Recommended Use
Chemical Occasional Contact Frequent Contact Secondary Containment Cargo Immersion Immersion Service
Perchloric Acid
Perchloroethylene 100°F (38°C) 100°F (38°C) 100°F (38°C)
Phenol

Also Known As: Carbolic Acid

NR NR NR NR NR
Phenolsulfonic Acid
Phosphoric Acid
Phosphorous Oxychloride 100°F (38°C) 100°F (38°C)
Phosphorous Trichloride 100°F (38°C) 100°F (38°C)
Picric Acid
Polyacrylic Acid
Polymer Emulsion 100°F (38°C) 100°F (38°C) 100°F (38°C)
Polymer Mannich 100°F (38°C) 100°F (38°C) 100°F (38°C)
Potassium Acetate 100°F (38°C) 100°F (38°C) 100°F (38°C)
Potassium Bicarbonate 100°F (38°C) 100°F (38°C) 100°F (38°C)
Potassium Bromide 100°F (38°C) 100°F (38°C) 100°F (38°C)
Potassium Carbonate
Potassium Chlorate 100°F (38°C) 100°F (38°C) 100°F (38°C)
Potassium Chloride 100°F (38°C) 100°F (38°C) 100°F (38°C)
Potassium Cyanide 100°F (38°C) 100°F (38°C)
Potassium Fluoride 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Potassium Hydroxide
Potassium Nitrate 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Potassium Permanganate NR NR NR NR NR
Potassium Persulfate NT NT NT NT NT
Potassium Sulfate 100°F (38°C) 100°F (38°C)
Propanediol 100°F (38°C) 100°F (38°C) 100°F (38°C)
Propylene Glycol 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Pulpmill (Green Liquor) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Pulpmill (White Liquor) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Pyridine NR NR NR NR NR
Rayon Spin Liquor NR NR NR NR NR
Salicyaldehyde 100°F (38°C) 100°F (38°C)
Salicylic Acid 100°F (38°C) 100°F (38°C) 100°F (38°C)
Silicon Tetrachloride NT NT NT NT NT
Silver Nitrate 100°F (38°C) 100°F (38°C)
Skydrol 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Sodium Acetate 100°F (38°C) 100°F (38°C) 100°F (38°C)
Sodium Aluminate NR NR NR NR NR
Sodium Bicarbonate 100°F (38°C) 100°F (38°C) 100°F (38°C)
Sodium Bisulfate
Sodium Bisulfite
Sodium Bromate
Sodium Carbonate 100°F (38°C) 100°F (38°C) 100°F (38°C)
Sodium Carbonate (slurry) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Sodium Chlorate
Sodium Chloride (sat'd)

Also Known As: Brine, Water (Sea), Salt Brine

100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Sodium Chlorite (>6 pH) NT NT NT NT NT
Sodium Chromate
Sodium Cyanide
Sodium Dichromate (all) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Sodium Fluoride 100°F (38°C) 100°F (38°C) 100°F (38°C)
Sodium Hydrosulfide
Sodium Hydroxide

Also Known As: Caustic Soda

Sodium Hypochlorite

Also Known As: Bleach

Sodium Oxalate 100°F (38°C) 100°F (38°C) 100°F (38°C)
Sodium Peroxide 100°F (38°C) 100°F (38°C) 100°F (38°C)
Sodium Phosphate
Sodium Polymethacrylate 100°F (38°C) 100°F (38°C) 100°F (38°C)
Sodium Silicate 100°F (38°C) 100°F (38°C) 100°F (38°C)
Sodium Silicofluoride 100°F (38°C) 100°F (38°C) 100°F (38°C)
Sodium Sulfate
Sodium Sulfide (all) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Sodium Sulfite 100°F (38°C) 100°F (38°C) 100°F (38°C)
Sodium Tartrate 100°F (38°C) 100°F (38°C) 100°F (38°C)
Sodium Thiosulfate
Stearic Acid (conc) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Styrene 100°F (38°C) 100°F (38°C)
Sugars (non-food contact) NT NT NT NT NT
Sulfamic Acid
Sulfite Liquor (paper industry) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Sulfur Dioxide (dry) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Sulfur Dioxide (wet) NT NT NT NT NT
Sulfur Trioxide (wet) NT NT NT NT NT
Sulfuric Acid

Also Known As: Sulphuric Acid

Tall Oil 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Tartaric Acid 100°F (38°C) 100°F (38°C) 100°F (38°C)
Tetrachloroethane NR NR NR NR NR
Tetrachloroethylene 100°F (38°C) 100°F (38°C)
Tetrahydrofuran NT NT NT NT NT
Tetrahydrofurfuryl Alcohol 100°F (38°C) 100°F (38°C)
Tetrasodium Pyrophosphate NR NR NR NR NR
Thionyl Chloride NR NR NR NR NR
Thionyl Chloride (water solution) NR NR NR NR NR
Toluene 100°F (38°C) 100°F (38°C)
Toluenesulfonic Acid 100°F (38°C) 100°F (38°C)
Toluidine NT NT NT NT NT
Trichloroacetic Acid
Trichlorobenzene 100°F (38°C) 100°F (38°C)
Trichloroethylene 100°F (38°C) 100°F (38°C)
Tricresyl Phosphate 100°F (38°C) 100°F (38°C) 100°F (38°C)
Triethyl Phosphite 100°F (38°C) 100°F (38°C)
Triethylamine 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Triethylenetetramine NR NR NR NR NR
Trisodium Phosphate

Also Known As: Sodium Phosphate (Tribasic)

Turpentine 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Urea
Urea Ammonium Nitrate 100°F (38°C) 100°F (38°C) 100°F (38°C)
Vegetable Oil (non-food contact) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Vinegar (non-food contact) NT NT NT NT NT
Vinyl Chloride NR NR NR NR NR
Water (deionized, non-potable)

Also Known As: Water (Demineralized, Non-potable)

100°F (38°C) 100°F (38°C) 100°F (38°C)

1 Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates    to product's performance capabilities only.

2 Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.

  • Color cards, swatches and fan decks are offered at no charge, by request , for more accurate color selection. Expert custom color matching is also available by contacting your Tnemec Coatings Consultant .
  • Deeptone colors may be more expensive than lighter colors. Please contact your Tnemec Coatings Consultant to verify product/color availability and pricing.

Products Available In White 11WH

White| 11WH (formerly WH01) rgb 242,238,231
Request a Swatch Swatch Unavailable
These digital colors should not be used to finalize your color selection. Please read our disclaimer . Use the color swatch tool on the left to request official color swatches.

Color Swatch Packet

Request another

(maximum 6 color swatches)

You haven't added any color swatches to your packet. Select some colors now by clicking a color above and then clicking the 'Request a Swatch' button on the color.

The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.

This ProductModified Polyamine Epoxy
Volume Solids Rec. DFT V.O.C. # of Components
100% (mixed) † Horizontal: 6.0 to 12.0 mils (150 to 305 microns) per coat.
Vertical: 4.0 to 8.0 mils (100 to 205 microns) per coat
Additional coats may be required for appearance or hiding.
Unthinned: 0.19 lbs/gallon (22 grams/litre)
Thinned 5% (No. 2 Thinner): 0.52 lbs/gallon (63 grams/litre)
Thinned 5% (No. 42 Thinner): 0.50 lbs/gallon (59 grams/litre) †
Two: Part A and Part B (2 Parts A to 1 Part B by volume)
Series 282 | Tneme-Glaze Polyamine Novolac Epoxy
Hide this product's data
Volume Solids Rec. DFT V.O.C. # of Components
100% (mixed) † Horizontal: 6.0 to 12.0 mils (150 to 305 microns) per coat.
Vertical: 4.0 to 8.0 mils (100 to 205 microns) per coat.
Additional coats may be required for appearance or hiding.
Unthinned: 0.19 lbs/gallon (23 grams/litre)
Thinned 5% (No. 2 Thinner): 0.52 lbs/gallon (63 grams/litre)
Thinned 5% (No. 42 Thinner): 0.50 lbs/gallon (60 grams/litre) †
Two: Part A and Part B (1 Part A to 1 Part B by volume)
Series 280FC | Tneme-Glaze Modified Polyamine Epoxy
Hide this product's data
Volume Solids Rec. DFT V.O.C. # of Components
100% (mixed) † Horizontal: 6.0 to 12.0 mils (150 to 305 microns) per coat.
Vertical: 4.0 to 8.0 mils (100 to 205 microns) per coat
Additional coats may be required for appearance or hiding.
Unthinned: 0.19 lbs/gallon (22 grams/litre)
Thinned 5% (No. 2 Thinner): 0.52 lbs/gallon (63 grams/litre)
Thinned 5% (No. 42 Thinner): 0.50 lbs/gallon (60 grams/litre) †
Two: Part A and Part B (2 Parts A to 1 Part B by volume)