find your coatings consultants
Find and contact a coatings consultant near you.

Series 280 | Tneme-Glaze

Generic Type Modified Polyamine Epoxy
Common Usage A glaze-like corrosion resistant coating for walls, ceilings, floors and other surfaces; resistant to frequent pressurized hot water and detergent cleaning. Used as a topcoat/sealer for heavy duty wall and floor systems or in a stand-alone high-performance function. Excellent chemical, stain- and abrasion-resistance for a variety of substrates.
Colors Available in the 16 standard StrataShield colors. Special colors available, please contact your Tnemec representative. Note: Epoxies chalk and yellow with age, extended exposure to UV and artificial lighting. Caution should be taken when selecting white and light pastel colors. Lack of ventilation, incomplete mixing, miscatalyzation or the use of heaters that emit carbon dioxide and carbon monoxide during application and initial stages of curing may cause amine blush, possibly affecting adhesion of subsequent topcoats.
Finish Gloss. (Roller application provides an orange peel finish.)
Surfacer/Filler/Patcher Series 130, 215, 218, 1254. Note: A repair kit of 201, 208 or 233 mixed with fumed silica, is available for small patching/surfacing repairs. For more extensive repairs and additional information, contact your Tnemec representative or Tnemec Technical Services.
Primers Concrete: Self-priming or Series 27WB, 201, 205, 208, 233, 237, 238, 241.
CMU: Self-priming over filled CMU
Wall board, Wood & Drywall: Self-priming or Series 151, 201, 233. Note: For taping joints on drywall, use a high quality compound such as Sheetrock brand Durabond 90.
Intermediate Series 206, 210, 233, 237, 237SC, 238, 241, 242, 245, 270, 273, 280
Topcoats Series 73, 247, 248, 280, 290, 291, 297, 1074, 1075, 1080, 1081
Volume Solids 100% (mixed) †
Recommended DFT Horizontal: 6.0 to 12.0 mils (150 to 305 microns) per coat.
Vertical: 4.0 to 8.0 mils (100 to 205 microns) per coat
Additional coats may be required for appearance or hiding.
Curing Time
Temperature To Topcoat To Place in Service
75°F (24°C) 8-24 hours 24 hours
Note: If more than 24 hours have elapsed between coats, the coated surface must be mechanically abraded before topcoating.
Volatile Organic Compounds Unthinned: 0.19 lbs/gallon (22 grams/litre)
Thinned 5% (No. 2 Thinner): 0.52 lbs/gallon (63 grams/litre)
Thinned 5% (No. 42 Thinner): 0.50 lbs/gallon (59 grams/litre) †
Theoretical Coverage 1,604 mil sq ft/gal (39.4 m²/L at 25 microns). See APPLICATION for coverage rates. †
Number of Components Two: Part A and Part B (2 Parts A to 1 Part B by volume)

Chemical Recommended Use - What is this?

The chemical resistance data listed on this website should only be used for general reference purposes. Substrates, temperatures, chemical combinations, and other variables can affect the performance of a coating in chemical exposure. Please contact your local to finalize the most appropriate system for your project.

Click the following button to download a PDF of the list of chemicals below.

1 Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates    to product's performance capabilities only.

2 Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.


Recommended Use
Chemical Occasional Contact Frequent Contact Secondary Containment Cargo Immersion Immersion Service
Dichloracetic Acid
Diesel Fuel

Also Known As: Fuel Oil, Diesel Oil

100°F (38°C) 100°F (38°C) 100°F (38°C)
Diethanolamine 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Diethylene Chloroformate NT NT NT NT NT
Diethylene Glycol Monobutyl Ether Acetate

Also Known As: Butyl "Carbitol" Acetate

NR NR NR NR NR
Diethylketone 100°F (38°C) 100°F (38°C)
Dimethyl Carbonyl Chloride NR NR NR NR NR
Dimethyl Formamide 100°F (38°C) 100°F (38°C)
Dimethyl Sulfoxide NT NT NT NT NT
Dimethylaminopropylamine NR NR NR NR NR
Dimethylaniline NR NR NR NR NR
Dinitro Toluene 100°F (38°C) 100°F (38°C)
Dinitrobenzene 100°F (38°C) 100°F (38°C)
Dodecyl Alcohol

Also Known As: Lauryl Alcohol

100°F (38°C) 100°F (38°C)
Ethoxy Ethanol 100°F (38°C) 100°F (38°C)
Ethoxylated Nonyl Phenol 100°F (38°C) 100°F (38°C) 100°F (38°C)
Ethyl Acetate 100°F (38°C) 100°F (38°C)
Ethyl Acrylate NT NT NT NT NT
Ethyl Bromide NR NR NR NR NR
Ethyl Chloride NR NR NR NR NR
Ethyl Chloroformate 100°F (38°C) 100°F (38°C)
Ethyl Ether 100°F (38°C) 100°F (38°C)
Ethyl Hexyl Acrylate NT NT NT NT NT
Ethyl Sulfate NT NT NT NT NT
Ethylamine NR NR NR NR NR
Ethylene Dichloride NR NR NR NR NR
Ethylene Glycol 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Ethylene Glycol Monobutyl Ether

Also Known As: Butyl "Cellosolve"

100°F (38°C) 100°F (38°C)
Ethylene Glycol Monobutyl Ether Acetate

Also Known As: Butyl "Cellosolve" Acetate

100°F (38°C) 100°F (38°C)
Ethylene Oxide NT NT NT NT NT
Ferric Chloride 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Ferric Nitrate 100°F (38°C) 100°F (38°C)
Ferric Sulfate
Fluorosilicic Acid

Also Known As: Hydrofluorosilicic Acid

Formaldehyde
Furfuryl Alcohol 100°F (38°C)
Gasoline (Unleaded) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Glucose (non-food contact) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Glycerin 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Glycol Acid 100°F (38°C) 100°F (38°C)
Gold Plating (Cyanide) 100°F (38°C) 100°F (38°C)
Grape Juice NT NT NT NT NT
Heptane 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Hexane 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Hydrazine
Hydrazine Hydrate NR NR NR NR NR
Hydriodic Acid
Hydrobromic Acid
Hydrochloric Acid
Hydrofluoric Acid
Hydrogen Peroxide
Hypochlorous Acid NR NR NR NR NR
Iodine (Crystals and vapor) 100°F (38°C) 100°F (38°C)
Isooctylthioglycolcolate 100°F (38°C) 100°F (38°C)
Isophorone NR NR NR NR NR
Isopropyl Acetate 100°F (38°C) 100°F (38°C)
Isopropyl Alcohol 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Isopropyl Ether NR NR NR NR NR
Jet A Fuel 100°F (38°C) 100°F (38°C) 100°F (38°C)
JP-4 Aviation Fuel 100°F (38°C) 100°F (38°C) 100°F (38°C)
Kerosene 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Lactic Acid
Lard (non-food contact) NT NT NT NT NT
Lauric Acid 100°F (38°C) 100°F (38°C)
Lauryl Chloride NT NT NT NT NT
Lead Acetate 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Lecithin 100°F (38°C) 100°F (38°C) 100°F (38°C)
Levulinic Acid 100°F (38°C) 100°F (38°C)
Linseed Oil 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Lithium Hydroxide
Lithium Hydroxide (saturated) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Maleic Acid 100°F (38°C) 100°F (38°C)
Malic Acid 100°F (38°C) 100°F (38°C)
Mercury and Salts 100°F (38°C) 100°F (38°C)
Methanol

Also Known As: Methyl Alcohol

NR NR NR NR NR
Methyl Acetate 100°F (38°C) 100°F (38°C)
Methyl Amyl Alcohol NT NT NT NT NT
Methyl Chloride NR NR NR NR NR
Methyl Ethyl Ketone 100°F (38°C)
Methyl Isobutyl Ketone 100°F (38°C) 100°F (38°C)
Methyl Oleate 100°F (38°C) 100°F (38°C) 100°F (38°C)
Methylene Chloride NR NR NR NR NR
Milk (non-food contact) NT NT NT NT NT
Mineral Oil 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Mineral Spirits 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Molasses (non-food contact) NT NT NT NT NT
Naphtha 100°F (38°C) 100°F (38°C)
Naphthalene 100°F (38°C) 100°F (38°C)
Naphthenic Acid NR NR NR NR NR
n-Butyl Acetate

Also Known As: Butyl Acetate

100°F (38°C) 100°F (38°C)
Nickel Plating (bright) 100°F (38°C) 100°F (38°C)
Nitric Acid
Nitrilotriethanol 100°F (38°C) 100°F (38°C)
Nitrobenzene 100°F (38°C) 100°F (38°C)
Nitromethane 100°F (38°C) 100°F (38°C)
n-Octyl Alcohol

Also Known As: Octanol

100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Oleic Acid 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Oxalic Acid
Pelargonic Acid NT NT NT NT NT
Pentachloroethane NT NT NT NT NT

1 Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates    to product's performance capabilities only.

2 Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.

  • Color cards, swatches and fan decks are offered at no charge, by request , for more accurate color selection. Expert custom color matching is also available by contacting your Tnemec Coatings Consultant .
  • Deeptone colors may be more expensive than lighter colors. Please contact your Tnemec Coatings Consultant to verify product/color availability and pricing.

Products Available In White 11WH

White| 11WH (formerly WH01) rgb 242,238,231
Request a Swatch Swatch Unavailable
These digital colors should not be used to finalize your color selection. Please read our disclaimer . Use the color swatch tool on the left to request official color swatches.

Color Swatch Packet

Request another

(maximum 6 color swatches)

You haven't added any color swatches to your packet. Select some colors now by clicking a color above and then clicking the 'Request a Swatch' button on the color.

The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.

This ProductModified Polyamine Epoxy
Volume Solids Rec. DFT V.O.C. # of Components
100% (mixed) † Horizontal: 6.0 to 12.0 mils (150 to 305 microns) per coat.
Vertical: 4.0 to 8.0 mils (100 to 205 microns) per coat
Additional coats may be required for appearance or hiding.
Unthinned: 0.19 lbs/gallon (22 grams/litre)
Thinned 5% (No. 2 Thinner): 0.52 lbs/gallon (63 grams/litre)
Thinned 5% (No. 42 Thinner): 0.50 lbs/gallon (59 grams/litre) †
Two: Part A and Part B (2 Parts A to 1 Part B by volume)
Series 282 | Tneme-Glaze Polyamine Novolac Epoxy
Hide this product's data
Volume Solids Rec. DFT V.O.C. # of Components
100% (mixed) † Horizontal: 6.0 to 12.0 mils (150 to 305 microns) per coat.
Vertical: 4.0 to 8.0 mils (100 to 205 microns) per coat.
Additional coats may be required for appearance or hiding.
Unthinned: 0.19 lbs/gallon (23 grams/litre)
Thinned 5% (No. 2 Thinner): 0.52 lbs/gallon (63 grams/litre)
Thinned 5% (No. 42 Thinner): 0.50 lbs/gallon (60 grams/litre) †
Two: Part A and Part B (1 Part A to 1 Part B by volume)
Series 280FC | Tneme-Glaze Modified Polyamine Epoxy
Hide this product's data
Volume Solids Rec. DFT V.O.C. # of Components
100% (mixed) † Horizontal: 6.0 to 12.0 mils (150 to 305 microns) per coat.
Vertical: 4.0 to 8.0 mils (100 to 205 microns) per coat
Additional coats may be required for appearance or hiding.
Unthinned: 0.19 lbs/gallon (22 grams/litre)
Thinned 5% (No. 2 Thinner): 0.52 lbs/gallon (63 grams/litre)
Thinned 5% (No. 42 Thinner): 0.50 lbs/gallon (60 grams/litre) †
Two: Part A and Part B (2 Parts A to 1 Part B by volume)