find your coatings consultants
Find and contact a coatings consultant near you.

Series 280 | Tneme-Glaze

Generic Type Modified Polyamine Epoxy
Common Usage A glaze-like corrosion resistant coating for walls, ceilings, floors and other surfaces; resistant to frequent pressurized hot water and detergent cleaning. Used as a topcoat/sealer for heavy duty wall and floor systems or in a stand-alone high-performance function. Excellent chemical, stain- and abrasion-resistance for a variety of substrates.
Colors Available in the 16 standard StrataShield colors. Special colors available, please contact your Tnemec representative. Note: Epoxies chalk and yellow with age, extended exposure to UV and artificial lighting. Caution should be taken when selecting white and light pastel colors. Lack of ventilation, incomplete mixing, miscatalyzation or the use of heaters that emit carbon dioxide and carbon monoxide during application and initial stages of curing may cause amine blush, possibly affecting adhesion of subsequent topcoats.
Finish Gloss. (Roller application provides an orange peel finish.)
Surfacer/Filler/Patcher Series 130, 215, 218, 1254. Note: A repair kit of 201, 208 or 233 mixed with fumed silica, is available for small patching/surfacing repairs. For more extensive repairs and additional information, contact your Tnemec representative or Tnemec Technical Services.
Primers Concrete: Self-priming or Series 27WB, 201, 205, 208, 233, 237, 238, 241.
CMU: Self-priming over filled CMU
Wall board, Wood & Drywall: Self-priming or Series 151, 201, 233. Note: For taping joints on drywall, use a high quality compound such as Sheetrock brand Durabond 90.
Intermediate Series 206, 210, 233, 237, 237SC, 238, 241, 242, 245, 270, 273, 280
Topcoats Series 73, 247, 248, 280, 290, 291, 297, 1074, 1075, 1080, 1081
Volume Solids 100% (mixed) †
Recommended DFT Horizontal: 6.0 to 12.0 mils (150 to 305 microns) per coat.
Vertical: 4.0 to 8.0 mils (100 to 205 microns) per coat
Additional coats may be required for appearance or hiding.
Curing Time
Temperature To Topcoat To Place in Service
75°F (24°C) 8-24 hours 24 hours
Note: If more than 24 hours have elapsed between coats, the coated surface must be mechanically abraded before topcoating.
Volatile Organic Compounds Unthinned: 0.19 lbs/gallon (22 grams/litre)
Thinned 5% (No. 2 Thinner): 0.52 lbs/gallon (63 grams/litre)
Thinned 5% (No. 42 Thinner): 0.50 lbs/gallon (59 grams/litre) †
Theoretical Coverage 1,604 mil sq ft/gal (39.4 m²/L at 25 microns). See APPLICATION for coverage rates. †
Number of Components Two: Part A and Part B (2 Parts A to 1 Part B by volume)

Chemical Recommended Use - What is this?

The chemical resistance data listed on this website should only be used for general reference purposes. Substrates, temperatures, chemical combinations, and other variables can affect the performance of a coating in chemical exposure. Please contact your local to finalize the most appropriate system for your project.

Click the following button to download a PDF of the list of chemicals below.

*Results are NOT suitable for direct or indirect food contact. Intended use exposure results relate to product's performance and substrate protection capabilities only.


Recommended Use
Chemical Occasional Contact Frequent Contact Secondary Containment Cargo Immersion Immersion Service
Acetaldehyde 100°F (38°C) 100°F (38°C)
Acetic Acid
Acetic Acid, Glacial NR NR NR NR NR
Acetic Anhydride
Acetone 100°F (38°C)
Acetyl Chloride NR NR NR NR NR
Acrylic Acid
Acrylonitrile
Adipic Acid
Allyl Alcohol 100°F (38°C) 100°F (38°C)
Allyl Chloride NT NT NT NT NT
Aluminum Bromide 100°F (38°C) 100°F (38°C)
Aluminum Chloride 100°F (38°C) 100°F (38°C) 100°F (38°C)
Aluminum Nitrate
Aluminum Sulfate

Also Known As: Alum

Ammonium Bisulfite 100°F (38°C) 100°F (38°C)
Ammonium Chloride 100°F (38°C) 100°F (38°C) 100°F (38°C)
Ammonium Fluoride NT NT NT NT NT
Ammonium Hydroxide
Ammonium Lauryl Sulfate
Ammonium Nitrate 100°F (38°C) 100°F (38°C) 100°F (38°C)
Ammonium Persulfate 100°F (38°C) 100°F (38°C) 100°F (38°C)
Ammonium Sulfate 100°F (38°C) 100°F (38°C) 100°F (38°C)
Ammonium Sulfide 100°F (38°C) 100°F (38°C) 100°F (38°C)
Ammonium Sulfite 100°F (38°C) 100°F (38°C) 100°F (38°C)
Ammonium Xylene Sulfonate
Amyl Acetate 100°F (38°C) 100°F (38°C)
Amyl Alcohol NT NT NT NT NT
Aniline NR NR NR NR NR
Aniline Hydrochloride NT NT NT NT NT
Antimony Chloride (tri) 100°F (38°C) 100°F (38°C)
Aqua Ammonia 100°F (38°C) 100°F (38°C) 100°F (38°C)
Aqua Regia 100°F (38°C)
Arsenous Acid NT NT NT NT NT
Barium Chloride
Barium Hydroxide
Barium Sulfate 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Barium Sulfide 100°F (38°C) 100°F (38°C) 100°F (38°C)
Beer (non-food contact)* NT NT NT NT NT
Benzal Chloride 100°F (38°C) 100°F (38°C) 100°F (38°C)
Benzaldehyde 100°F (38°C) 100°F (38°C) 100°F (38°C)
Benzene 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Benzene Sulfonic Acid 100°F (38°C) 100°F (38°C)
Benzene Thiol NR NR NR NR NR
Boric Acid
Bromine
Bromine Gas (Dry) NT NT NT NT NT
Bromine Gas (Wet) NT NT NT NT NT
Butyl Acid Levulinic 100°F (38°C) 100°F (38°C)
Butyl Acrylate NT NT NT NT NT
Butyl Amine NR NR NR NR NR
Butyl Ether 100°F (38°C) 100°F (38°C)
Butyric Acid NR NR NR NR NR
Cadmium Chloride 100°F (38°C) 100°F (38°C)
Cadmium Plating (Cyanide) 100°F (38°C) 100°F (38°C)
Calcium Bisulfite 100°F (38°C) 100°F (38°C)
Calcium Carbonate 100°F (38°C) 100°F (38°C) 100°F (38°C)
Calcium Chloride
Calcium Hydroxide

Also Known As: Lime Slurry

Calcium Hypochlorite
Calcium Nitrate 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Calcium Nitrite NT NT NT NT NT
Calcium Oxide
Calcium Sulfate 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Calcium Sulfite 100°F (38°C) 100°F (38°C)
Caprylic Acid

Also Known As: Octanoic Acid

NT NT NT NT NT
Carbon Bisulfide (Di) Fumes (wet) 100°F (38°C) 100°F (38°C)
Carbon Dioxide 100°F (38°C) 100°F (38°C) 100°F (38°C)
Carbon Tetrachloride 100°F (38°C) 100°F (38°C)
Castor Oil 100°F (38°C) 100°F (38°C) 100°F (38°C)
Chloracetic Acid
Chlorine Dioxide 100°F (38°C) 100°F (38°C) 100°F (38°C)
Chloroacetic Acid
Chlorobenzene 100°F (38°C) 100°F (38°C) 100°F (38°C)
Chlorobutane NT NT NT NT NT
Chloroform NR NR NR NR NR
Chlorophenol NR NR NR NR NR
Chlorosulfonic Acid NR NR NR NR NR
Chlorotoluene 100°F (38°C) 100°F (38°C)
Chromic Acid
Chromic Chloride 100°F (38°C) 100°F (38°C) 100°F (38°C)
Citric Acid
Copper Chloride 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Copper Nitrate 100°F (38°C) 100°F (38°C)
Copper Plating (Acid) 100°F (38°C) 100°F (38°C)
Copper Plating (Cyanide) 100°F (38°C) 100°F (38°C)
Copper Sulfate
Copper Sulfate (dry) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Corn Oil (non-food contact)* 100°F (38°C) 100°F (38°C)
Cottonseed Oil (non-food contact)* 100°F (38°C) 100°F (38°C) 100°F (38°C)
Cresol NR NR NR NR NR
Cresylic Acid NR NR NR NR NR
Crude Oil (Sour) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Cumene NR NR NR NR NR
Cyclohexane 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Cyclohexanone 100°F (38°C) 100°F (38°C)
Cymene 100°F (38°C) 100°F (38°C)
Dextrose 100°F (38°C) 100°F (38°C) 100°F (38°C)
Dibromopropane Phosphate 100°F (38°C) 100°F (38°C)
Dibutyl Phthalate 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
*Results are NOT suitable for direct or indirect food contact. Intended use exposure results relate to product's performance and substrate protection capabilities only.
  • Color cards, swatches and fan decks are offered at no charge, by request , for more accurate color selection. Expert custom color matching is also available by contacting your Tnemec Coatings Consultant .
  • Deeptone colors may be more expensive than lighter colors. Please contact your Tnemec Coatings Consultant to verify product/color availability and pricing.

Products Available In White 11WH

White| 11WH (formerly WH01) rgb 242,238,231
Request a Swatch Swatch Unavailable
These digital colors should not be used to finalize your color selection. Please read our disclaimer . Use the color swatch tool on the left to request official color swatches.

Color Swatch Packet

Request another

(maximum 6 color swatches)

You haven't added any color swatches to your packet. Select some colors now by clicking a color above and then clicking the 'Request a Swatch' button on the color.

The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.

This ProductModified Polyamine Epoxy
Volume Solids Rec. DFT V.O.C. # of Components
100% (mixed) † Horizontal: 6.0 to 12.0 mils (150 to 305 microns) per coat.
Vertical: 4.0 to 8.0 mils (100 to 205 microns) per coat
Additional coats may be required for appearance or hiding.
Unthinned: 0.19 lbs/gallon (22 grams/litre)
Thinned 5% (No. 2 Thinner): 0.52 lbs/gallon (63 grams/litre)
Thinned 5% (No. 42 Thinner): 0.50 lbs/gallon (59 grams/litre) †
Two: Part A and Part B (2 Parts A to 1 Part B by volume)
Series 282 | Tneme-Glaze Polyamine Novolac Epoxy
Hide this product's data
Volume Solids Rec. DFT V.O.C. # of Components
100% (mixed) † Horizontal: 6.0 to 12.0 mils (150 to 305 microns) per coat.
Vertical: 4.0 to 8.0 mils (100 to 205 microns) per coat.
Additional coats may be required for appearance or hiding.
Unthinned: 0.19 lbs/gallon (23 grams/litre)
Thinned 5% (No. 2 Thinner): 0.52 lbs/gallon (63 grams/litre)
Thinned 5% (No. 42 Thinner): 0.50 lbs/gallon (60 grams/litre) †
Two: Part A and Part B (1 Part A to 1 Part B by volume)
Series 280FC | Tneme-Glaze Modified Polyamine Epoxy
Hide this product's data
Volume Solids Rec. DFT V.O.C. # of Components
100% (mixed) † Horizontal: 6.0 to 12.0 mils (150 to 305 microns) per coat.
Vertical: 4.0 to 8.0 mils (100 to 205 microns) per coat
Additional coats may be required for appearance or hiding.
Unthinned: 0.19 lbs/gallon (22 grams/litre)
Thinned 5% (No. 2 Thinner): 0.52 lbs/gallon (63 grams/litre)
Thinned 5% (No. 42 Thinner): 0.50 lbs/gallon (60 grams/litre) †
Two: Part A and Part B (2 Parts A to 1 Part B by volume)