Below is only a summary of product data. Please download the product datasheet for complete details. English: Product Data MSDS Spanish: Product Data MSDS French: Product Data MSDS
| Generic Type | Cycloaliphatic Amine Epoxy | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Common Usage | Versatile coating applies up to 10 mils per coat on steel or concrete. Protects in immersion, salt spray and chemical exposures. Superior abrasion- and stain-resistance. | ||||||||
| Colors | Primer: 1211 Red. Topcoat: Refer to Tnemec Color Guide. Note: Epoxies chalk with extended exposure to sunlight. Lack of ventilation, incomplete mixing, miscatalyzation or the use of heaters that emit carbon dioxide and carbon monoxide during application and initial stages of curing may cause yellowing to occur. | ||||||||
| Finish | Semi-gloss. Gloss can vary with texture, porosity of substrate and thickness of film. | ||||||||
| Primers | Steel: Self-priming or Series 66, L69, L69F, N69, N69F, V69, V69F, 90E-92, 90-97, 90G-1K97, 161 Concrete: Self-priming or Series 215, 218. CMU: Self-priming or Series 130, 215, 218 |
||||||||
| Topcoats | Series 66, L69, L69F, N69, N69F, V69, V69F, 73, 104, 1074, 1074U, 1075, 1075U Refer to COLORS on applicable topcoat data sheets for additional information. Note: When topcoating with Endura-Shield polyurethane finish, exterior exposed Series 104 has the following maximum time to recoat: Series 73, 1074, 1074U, 1075 or 1075U, 60 days. If this time is exceeded, an epoxy intermediate coat or scarification is required before topcoating. Refer to appropriate topcoat data sheet for additional information. |
||||||||
| Volume Solids | 82.0 ± 2.0% (mixed) † | ||||||||
| Recommended DFT | 4.0 to 10.0 mils (100 to 255 microns) per coat. Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative. | ||||||||
| Curing Time |
Curing time varies with surface temperature, air movement, humidity and film thickness. |
||||||||
| Volatile Organic Compounds | EPA Method 24 † Unthinned: 0.80 lbs/gallon (96 grams/litre) Thinned 10% (No. 2 Thinner): 1.92 lbs/gallon (230 grams/litre) Thinned 10% (No. 49 Thinner): 0.80 lbs/gallon (96 grams/litre) |
||||||||
| HAPS | Unthinned: 1.60 lbs/gal solids Thinned 10% (No. 2 Thinner): 2.50 lbs/gal solids Thinned 10% (No. 49 Thinner): 1.60 lbs/gal solids |
||||||||
| Theoretical Coverage | 1,315 mil sq ft/gal (32.3 m²/L at 25 microns). See APPLICATION for coverage rates. † | ||||||||
| Number of Components | Two: Part A (amine) and Part B (epoxy) |
The chemical resistance data listed on this website should only be used for general reference purposes. Substrates, temperatures, chemical combinations, and other variables can affect the performance of a coating in chemical exposure. Please contact your local Tnemec Coatings Consultant to finalize the most appropriate system for your project.
*Results are NOT suitable for direct or indirect food contact. Intended use exposure results relate to product's performance and substrate protection capabilities only.
| Chemical | Recommended Use |
|---|---|
|
1, 1, 1-Trichloroethane
Also Known As: Trichloroethane |
FC, OC |
| Acetaldehyde | NR |
| Acetic Acid (10%) | FC, OC |
| Acetic Acid (30%) | OC |
| Acetic Acid (5%) | FC, OC |
| Acetic Acid, Glacial | NR |
| Acetic Anhydride | NR |
| Acetone | OC |
| Acetonitrile | NR |
| Acetonitrile (20%) | NR |
| Acrylic Acid (25%) | NR |
| Acrylic Latex Solution | IS, TS, SC, FC, OC |
| Acrylonitrile | NR |
| Activated Carbon | IS, TS, SC, FC, OC |
| Adipic Acid (Dry) | FC, OC |
| Allyl Chloride | NR |
| Aluminum Chloride | SC, FC, OC |
| Aluminum Chloride (25%) | IS, TS, SC, FC, OC |
| Aluminum Hydroxide | SC, FC, OC |
| Aluminum Nitrate (50%) | SC, FC, OC |
| Aluminum Sulfate (49%) | IS, TS, SC, FC, OC |
| Ammonium Bisulfite | IS, TS, SC, FC, OC |
| Ammonium Carbonate | SC, FC, OC |
| Ammonium Chloride (50%) | IS, TS, SC, FC, OC |
| Ammonium Fluoride | NR |
| Ammonium Hydroxide (10%) | SC, FC, OC |
| Ammonium Hydroxide (30%) | SC, FC, OC |
| Ammonium Lauryl Sulfate (30%) | NR |
| Ammonium Nitrate (38%) | IS, TS, SC, FC, OC |
| Ammonium Nitrate (50%) | IS, TS, SC, FC, OC |
| Ammonium Nitrite (50%) | IS, TS, SC, FC, OC |
| Ammonium Perchlorate (Dry) | IS, TS, SC, FC, OC |
| Ammonium Persulfate (10%) | SC, FC, OC |
| Ammonium Phosphate | IS, TS, SC, FC, OC |
| Ammonium Sulfate | IS, TS, SC, FC, OC |
| Ammonium Sulfide | IS, TS, SC, FC, OC |
| Ammonium Sulfite | SC, FC, OC |
| Amyl Acetate | FC, OC |
| Aniline (20%) | NR |
| Animal Fats | SC, FC, OC |
| Aqua Ammonia | SC, FC, OC |
| Aqua Regia | OC |
| Aviation Gas | SC, FC, OC |
| Barium Chloride (50%) | IS, TS, SC, FC, OC |
| Barium Hydroxide (50%) | IS, TS, SC, FC, OC |
| Barium Nitrate | IS, TS, SC, FC, OC |
| Barium Sulfate | IS, TS, SC, FC, OC |
| Barium Sulfide | IS, TS, SC, FC, OC |
| Beer* | IS, TS, SC, FC, OC |
| Benzene | IS, TS, SC, FC, OC |
| Benzene Sulfonic Acid | NR |
| Benzoic Acid | NR |
| Benzoyl Chloride | SC, FC, OC |
| Benzyl Alcohol | OC |
| Benzyl Chloride | SC, FC, OC |
| Borax | IS, TS, SC, FC, OC |
| Boric Acid (5%) | IS, TS, SC, FC, OC |
| Butyl Acrylate | NR |
| Butyl Amine | NR |
| Butyric Acid | NR |
| Cadmium Bromide (10%) | IS, TS, SC, FC, OC |
| Cadmium Chloride (50%) | IS, TS, SC, FC, OC |
| Cadmium Plating (Cyanide) | NR |
| Calcium Bisulfate | NR |
| Calcium Bromide | IS, TS, SC, FC, OC |
| Calcium Carbonate | IS, TS, SC, FC, OC |
| Calcium Chloride (50%) | IS, TS, SC, FC, OC |
|
Calcium Hydroxide (30%)
Also Known As: Lime Slurry |
IS, TS, SC, FC, OC |
| Calcium Hypochlorite (5%) | SC, FC, OC |
| Calcium Nitrate | IS, TS, SC, FC, OC |
| Calcium Nitrite | OC |
| Calcium Oxide (Lime) | IS, TS, SC, FC, OC |
| Calcium Sulfate | IS, TS, SC, FC, OC |
| Calcium Sulfite | IS, TS, SC, FC, OC |
| Caprolactam | SC, FC, OC |
| Carbon Disulfide | SC, FC, OC |
| Carbon Tetrachloride | SC, FC, OC |
| Castor Oil | IS, TS, SC, FC, OC |
| Chlorine Dioxide | SC, FC, OC |
| Chlorobenzene | NR |
| Chloroform | NR |
| Chlorosulfonic Acid | NR |
| Chromic Acid (10%) | FC, OC |
| Chromic Acid (20%) | NR |
| Citric Acid (=< 50%) | IS, TS, SC, FC, OC |
| Coal (high and low sulfur) | IS, TS, SC, FC, OC |
| Cola* | IS, TS, SC, FC, OC |
| Copper Acetate (50%) | SC, FC, OC |
| Copper Chloride | IS, TS, SC, FC, OC |
| Copper Sulfate (10%) | IS, TS, SC, FC, OC |
| Copper Sulfate (20%) | IS, TS, SC, FC, OC |
| Copper Sulfate (50%) | IS, TS, SC, FC, OC |
| Copper Sulfate (dry) | IS, TS, SC, FC, OC |
| Corn Mash Solution* | FC, OC |
| Corn Oil* | IS, TS, SC, FC, OC |
| Cottonseed Oil* | IS, TS, SC, FC, OC |
| Cresylic Acid | NR |
| Crude Oil (Sour) | IS, TS, SC, FC, OC |
| Crude Oil (Sweet) | IS, TS, SC, FC, OC |
| Cumene Hydroperoxide | NR |
*Results are NOT suitable for direct or indirect food contact. Intended use exposure results relate to product's performance and substrate protection capabilities only.
Series 104 H.S. Epoxy applied in various areas of the Tampa Bay Water Treatment Plant.