find your coatings consultants
Find and contact a coatings consultant near you.

Series 222 | Deco-Tread

Generic Type Colored Quartz-Filled Modified Polyamine Epoxy
Common Usage A decorative broadcast or slurry broadcast laminated floor-topping system installed at 1/8” minimum thickness. Protects against impact, abrasion and mild chemicals with an aesthetically pleasing appearance.
Colors Available in 12 standard colors. Refer to StrataShield Decorative Quartz Color card. Custom colors also available. Note: Epoxies chalk and yellow with age, extended exposure to UV and artificial lighting. Lack of ventilation, incomplete mixing, miscatalyzation or the use of heaters that emit carbon dioxide and carbon monoxide during application and initial stages of curing may cause amine blush, possibly affecting adhesion of subsequent topcoats.
Finish Decorative quartz—multi-colored appearance. The finished appearance and texture will depend on the type, film thickness and number of the clear finish coats selected.
Surfacer/Filler/Patcher Series 206, 215. Note: A repair kit of 201, with Part C fumed silica, is available for small patching/surfacing repairs. For more extensive repairs and additional information, contact your Tnemec representative or Tnemec Technical Services.
Primers Concrete: Self-priming or Series 201, 208, 241.
Topcoats Series 247, 248, 256, 284, 285, 294, 295, 296. Note: If Series 247, 248, 285, 294, 295 or 296 is selected for the finish coat, an intermediate coat of Series 284 is required. Refer to the StrataShield Installation and Application guide for floors.
Volume Solids 100% (mixed)
Recommended DFT Minimum of 1/8”. Requires two broadcast applications at 1/16” each or applied as a slurry broadcast.
Curing Time
Temperature To Topcoat/Broadcast To Place in Service
75°F (24°C) 12 to 24 hours 24 hours
Note: If more than 24 hours have elapsed between coats, the coated surface must be mechanically abraded before topcoating. Note: There is no maximum recoat time if aggregate has been broadcast to refusal into the preceding coat. Curing time varies with surface temperature, air movement, humidity and film thickness.
Volatile Organic Compounds Unthinned: 0.013 lbs/gallon (1.5 grams/litre)
Theoretical Coverage 1,604 mil sq ft/gal (39.4 m²/L at 25 microns). See APPLICATION for coverage rates.
Number of Components Three—Liquids: Part A & Part B (2 Parts A to 1 Part B by volume). Colored quartz: Part C
The Part C colored quartz (ChromaQuartz) is available from Tnemec or can be purchased from a different supplier.

Chemical Recommended Use - What is this?

The chemical resistance data listed on this website should only be used for general reference purposes. Substrates, temperatures, chemical combinations, and other variables can affect the performance of a coating in chemical exposure. Please contact your local to finalize the most appropriate system for your project.

Click the following button to download a PDF of the list of chemicals below.

*Results are NOT suitable for direct or indirect food contact. Intended use exposure results relate to product's performance and substrate protection capabilities only.


Ace - Die Die - Per Phe - Zin
Recommended Use
Chemical Occasional Contact Frequent Contact Secondary Containment Cargo Immersion Immersion Service
Acetaldehyde NT NT NT NT NT
Acetic Acid
Acetic Acid, Glacial 100°F (38°C) 100°F (38°C)
Acetic Anhydride
Acetone 100°F (38°C) 100°F (38°C)
Acetyl Chloride NT NT NT NT NT
Acrylic Acid
Acrylonitrile
Adipic Acid
Allyl Alcohol 100°F (38°C) 100°F (38°C) 100°F (38°C)
Allyl Chloride NT NT NT NT NT
Aluminum Bromide 100°F (38°C) 100°F (38°C)
Aluminum Chloride 100°F (38°C) 100°F (38°C)
Aluminum Nitrate
Aluminum Sulfate

Also Known As: Alum

Ammonium Bisulfite 100°F (38°C) 100°F (38°C) 100°F (38°C)
Ammonium Chloride 100°F (38°C) 100°F (38°C) 100°F (38°C)
Ammonium Fluoride 100°F (38°C) 100°F (38°C) 100°F (38°C)
Ammonium Hydroxide
Ammonium Lauryl Sulfate
Ammonium Nitrate 100°F (38°C) 100°F (38°C)
Ammonium Persulfate 100°F (38°C) 100°F (38°C)
Ammonium Sulfate 100°F (38°C) 100°F (38°C)
Ammonium Sulfide 100°F (38°C) 100°F (38°C)
Ammonium Sulfite 100°F (38°C) 100°F (38°C)
Ammonium Xylene Sulfonate
Amyl Acetate 100°F (38°C) 100°F (38°C)
Amyl Alcohol 100°F (38°C) 100°F (38°C)
Aniline NR NR NR NR NR
Aniline Hydrochloride 100°F (38°C) 100°F (38°C) 100°F (38°C)
Antimony Chloride (tri) 100°F (38°C) 100°F (38°C)
Aqua Ammonia 100°F (38°C) 100°F (38°C) 100°F (38°C)
Aqua Regia 100°F (38°C) 100°F (38°C)
Arsenous Acid 100°F (38°C) 100°F (38°C)
Barium Chloride
Barium Hydroxide
Barium Sulfate 100°F (38°C) 100°F (38°C) 100°F (38°C)
Barium Sulfide 100°F (38°C) 100°F (38°C) 100°F (38°C)
Beer (non-food contact)* NR NR NR NR NR
Benzal Chloride 100°F (38°C) 100°F (38°C)
Benzaldehyde NR NR NR NR NR
Benzene 100°F (38°C) 100°F (38°C)
Benzene Sulfonic Acid 100°F (38°C) 100°F (38°C)
Benzene Thiol 100°F (38°C) 100°F (38°C)
Boric Acid
Bromine
Bromine Gas (Dry) NR NR NR NR NR
Bromine Gas (Wet) NR NR NR NR NR
Butyl Acid Levulinic 100°F (38°C) 100°F (38°C)
Butyl Acrylate 100°F (38°C) 100°F (38°C)
Butyl Amine 100°F (38°C) 100°F (38°C)
Butyl Ether 100°F (38°C) 100°F (38°C)
Butyric Acid NR NR NR NR NR
Cadmium Chloride 100°F (38°C) 100°F (38°C)
Cadmium Plating (Cyanide) 100°F (38°C) 100°F (38°C)
Calcium Bisulfite 100°F (38°C) 100°F (38°C)
Calcium Chloride
Calcium Hydroxide

Also Known As: Lime Slurry

Calcium Hypochlorite
Calcium Nitrate NT NT NT NT NT
Calcium Nitrite 100°F (38°C) 100°F (38°C) 100°F (38°C)
Calcium Sulfate 100°F (38°C) 100°F (38°C) 100°F (38°C)
Calcium Sulfite 100°F (38°C) 100°F (38°C)
Caprylic Acid

Also Known As: Octanoic Acid

NT NT NT NT NT
Carbon Bisulfide (Di) Fumes (wet) NR NR NR NR NR
Carbon Dioxide 100°F (38°C) 100°F (38°C) 100°F (38°C)
Carbon Tetrachloride 100°F (38°C) 100°F (38°C)
Castor Oil 100°F (38°C) 100°F (38°C) 100°F (38°C)
Chloracetic Acid
Chlorine Dioxide NT NT NT NT NT
Chloroacetic Acid
Chlorobenzene 100°F (38°C) 100°F (38°C)
Chlorobutane 100°F (38°C) 100°F (38°C)
Chloroform NR NR NR NR NR
Chlorophenol 100°F (38°C) 100°F (38°C)
Chlorosulfonic Acid NR NR NR NR NR
Chlorotoluene NR NR NR NR NR
Chromic Acid
Chromic Chloride 100°F (38°C) 100°F (38°C) 100°F (38°C)
Citric Acid
Copper Chloride 100°F (38°C) 100°F (38°C) 100°F (38°C)
Copper Nitrate 100°F (38°C) 100°F (38°C)
Copper Plating (Acid) 100°F (38°C) 100°F (38°C)
Copper Plating (Cyanide) 100°F (38°C) 100°F (38°C)
Copper Sulfate
Copper Sulfate (dry) NT NT NT NT NT
Corn Oil (non-food contact)* 100°F (38°C) 100°F (38°C)
Cottonseed Oil (non-food contact)* 100°F (38°C) 100°F (38°C) 100°F (38°C)
Cresol NR NR NR NR NR
Cresylic Acid NR NR NR NR NR
Crude Oil (Sour) 100°F (38°C) 100°F (38°C)
Cumene 100°F (38°C) 100°F (38°C)
Cyclohexane 100°F (38°C) 100°F (38°C)
Cyclohexanone 100°F (38°C) 100°F (38°C)
Cymene 100°F (38°C) 100°F (38°C)
Dextrose 100°F (38°C) 100°F (38°C)
Dibromopropane Phosphate 100°F (38°C) 100°F (38°C)
Dibutyl Phthalate 100°F (38°C) 100°F (38°C) 100°F (38°C)
Dichloracetic Acid
Diesel Fuel

Also Known As: Fuel Oil, Diesel Oil

100°F (38°C) 100°F (38°C)
Ace - Die Die - Per Phe - Zin
*Results are NOT suitable for direct or indirect food contact. Intended use exposure results relate to product's performance and substrate protection capabilities only.
  • Color cards, swatches and fan decks are offered at no charge, by request , for more accurate color selection. Expert custom color matching is also available by contacting your Tnemec Coatings Consultant .
  • Deeptone colors may be more expensive than lighter colors. Please contact your Tnemec Coatings Consultant to verify product/color availability and pricing.

Products Available In 222 Deco-Tread 201

222 Deco-Tread| 201 View hi-res version
Request a Swatch Swatch Unavailable
These digital colors should not be used to finalize your color selection. Please read our disclaimer . Use the color swatch tool on the left to request official color swatches.

Color Swatch Packet

Request another

(maximum 6 color swatches)

You haven't added any color swatches to your packet. Select some colors now by clicking a color above and then clicking the 'Request a Swatch' button on the color.

The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.

This ProductColored Quartz-Filled Modified Polyamine Epoxy
Volume Solids Rec. DFT V.O.C. # of Components
100% (mixed) Minimum of 1/8”. Requires two broadcast applications at 1/16” each or applied as a slurry broadcast. Unthinned: 0.013 lbs/gallon (1.5 grams/litre) Three—Liquids: Part A & Part B (2 Parts A to 1 Part B by volume). Colored quartz: Part C
The Part C colored quartz (ChromaQuartz) is available from Tnemec or can be purchased from a different supplier.
Series 223 | Deco-Trowel Colored Quartz-Filled Modified Polyamine Epoxy
Hide this product's data
Volume Solids Rec. DFT V.O.C. # of Components
100% (mixed) Suggested 1/4” Unthinned: 0.013 lbs/gallon (1.5 grams/litre) Three—Liquids: Part A & Part B (2 Parts A to 1 Part B by volume). Colored quartz: Part C
The Part C colored quartz (ChromaQuartz) is available from Tnemec or can be purchased from a different supplier.
Series 224 | Deco-Fleck Decorative Flake-Filled Modified Polyamine Epoxy
Hide this product's data
Volume Solids Rec. DFT V.O.C. # of Components
100% (mixed) From 20 mils DFT to 1/16” depending on broadcast method. Unthinned: 0.013 lbs/gallon (1.5 grams/litre) Three—Liquids: Part A & Part B (2 Parts A to 1 Part B by volume). Colored Flake: Part C
The Part C colored flake is available from Tnemec or can be purchased from a different supplier.