find your coatings consultants
Find and contact a coatings consultant near you.

Series 118 | Uni-Bond Mastic

Generic Type Mastic Waterborne Acrylic
Common Usage A high-build, rust-inhibitive, elastomeric coating formulated for exceptional adhesion and corrosion resistance over minimally prepared aged coating systems. Series 118 is an excellent choice for projects where abrasive blast cleaning of the substrate is not possible and an anti-corrosive coating is needed. Uni-Bond Mastic accepts a variety of high-performance topcoats for the creation of a long-term protective and aesthetic coating system.
Colors 1281 White, 03BR Washed Khaki, 06WH Albatross, 18YW Sponge, 19RD Salmon, 20GN Fairway, 25BL Fountain Bleu, 30GR Comet, 34GR Deep Space, 36BL Touch of Blue, 45GR Captain Hook, 83BR Kindling.
Finish Matte
Primers Steel: Self-priming
Topcoats Series 30, 72, 73, 700, V700, 701, V701, 740, 750, 1026, 1028, 1029, 1070, 1070V, 1071, 1071V, 1072, 1072V, 1074, 1074U, 1075, 1075U or 1095. Note: Series 118 is not intended to be a finish coat. A topcoat is strongly recommended for aesthetics and avoidance of dirt accumulation.
Volume Solids 55.0 ± 2.0% †
Recommended DFT 6.0 to 8.0 mils (150 to 205 microns) per coat. Note: Two coats are required over bare steel. Overcoating an aged system that is mostly intact and tightly adhered can be achieved by spot priming prior to applying a full coat.
Curing Time
Temperature To TouchTo HandleTo Recoat
75°F (24°C)30 minutes4 hours8 hours
Curing time varies with surface temperature, air movement, humidity and film thickness.
Volatile Organic Compounds Unthinned: 0.26 lbs/gallon (31 grams/litre) †
HAPS Unthinned: 0.02 lbs/gal solids
Theoretical Coverage 882 mil sq ft/gal (21.6 m²/L at 25 microns). See APPLICATION for coverage rates. †
Number of Components One
1
Category
2
Chemical Name(required)
3
Concentration
4
What is this?

Note: Not Recommended (NR), Not Tested (NT), Please Call (PC)

 

Chemical Recommended Use - What is this?

The chemical resistance data listed on this website should only be used for general reference purposes. Substrates, temperatures, chemical combinations, and other variables can affect the performance of a coating in chemical exposure. Please contact your local to finalize the most appropriate system for your project.

Click the following button to download a PDF of the list of chemicals below.

*Results are NOT suitable for direct or indirect food contact. Intended use exposure results relate to product's performance and substrate protection capabilities only.


Recommended Use
Chemical Occasional Contact Frequent Contact Secondary Containment Cargo Immersion Immersion Service
*Results are NOT suitable for direct or indirect food contact. Intended use exposure results relate to product's performance and substrate protection capabilities only.
  • Color cards, swatches and fan decks are offered at no charge, by request , for more accurate color selection. Expert custom color matching is also available by contacting your Tnemec Coatings Consultant .
  • Deeptone colors may be more expensive than lighter colors. Please contact your Tnemec Coatings Consultant to verify product/color availability and pricing.
These digital colors should not be used to finalize your color selection. Please read our disclaimer . Use the color swatch tool on the left to request official color swatches.

Color Swatch Packet

Request another

(maximum 6 color swatches)

You haven't added any color swatches to your packet. Select some colors now by clicking a color above and then clicking the 'Request a Swatch' button on the color.

The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.

This ProductMastic Waterborne Acrylic

French version of product datasheet is currently not available.

GET THE LATEST NEWS AND UPDATES BY EMAIL FROM TNEMEC

support documents