find your coatings consultants
Find and contact a coatings consultant near you.

Series 90-98 | Tneme-Zinc

Generic Type Ethyl Silicate Inorganic Zinc-Rich
Common Usage Self-curing, corrosion-resistant steel or ductile iron primer with tenacious bonding and abrasion resistance qualities. Its galvanic action resists undercutting. Excellent stand alone performance in high temperature or long-term atmospheric exposure. Finish with specialized topcoats to improve aesthetics, increase long-term performance or protect the primer from attack in aggressive exposures.
Colors Greenish-Gray
Topcoats Series 27, 27WB, 46H-413, 46-465, 66, 66HS, L69, L69F, N69, N69F, N140, N140F, 104, 113, 114, 161, 161HS, 971, 1026.
Volume Solids 65.0 ± 2.0% (mixed) void content method.
Recommended DFT 2.0 to 3.5 mils (50 to 90 microns) per coat.
Curing Time
Temperature (50% Relative Humidity)To HandleTo Recoat
75°F (24°C)1 hour16 hours
0°F (-18°C)7 days minimum
Moisture is required to achieve proper cure. Curing time will vary with temperature and humidity. At relative humidities below 30%, it may be necessary to gently spray the coated surface with water to achieve proper cure and to minimize recoat time. Consult your Tnemec representative for specific recommendations.
Volatile Organic Compounds Unthinned: 3.48 lbs/gallon (417 grams/litre)
Thinned 9% (No. 15 Thinner): 3.75 lbs/gallon (449 grams/litre)
Thinned 6% (No. 18 Thinner): 3.75 lbs/gallon (449 grams/litre)
HAPS Unthinned: 0.41 lbs/gal solids
Thinned 9% (No. 15 Thinner): 0.49 lbs/galon solids
Thinned 6% No. 18 Thinner): 0.41 lbs/gallon solids
Theoretical Coverage 1,042 mil sq ft/gal (25.6 m²/L at 25 microns). See APPLICATION for coverage rates.
Number of Components Two: Part A and Part B
1
Category
2
Chemical Name(required)
3
Concentration
4
What is this?

Note: Not Recommended (NR), Not Tested (NT), Please Call (PC)

 

Chemical Recommended Use - What is this?

The chemical resistance data listed on this website should only be used for general reference purposes. Substrates, temperatures, chemical combinations, and other variables can affect the performance of a coating in chemical exposure. Please contact your local to finalize the most appropriate system for your project.

Click the following button to download a PDF of the list of chemicals below.

1 Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates    to product's performance capabilities only.

2 Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.


Recommended Use
Chemical Occasional Contact Frequent Contact Secondary Containment Cargo Immersion Immersion Service

1 Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates    to product's performance capabilities only.

2 Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.

  • Color cards, swatches and fan decks are offered at no charge, by request , for more accurate color selection. Expert custom color matching is also available by contacting your Tnemec Coatings Consultant .
  • Deeptone colors may be more expensive than lighter colors. Please contact your Tnemec Coatings Consultant to verify product/color availability and pricing.
These digital colors should not be used to finalize your color selection. Please read our disclaimer . Use the color swatch tool on the left to request official color swatches.

Color Swatch Packet

Request another

(maximum 6 color swatches)

You haven't added any color swatches to your packet. Select some colors now by clicking a color above and then clicking the 'Request a Swatch' button on the color.

The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.

This ProductEthyl Silicate Inorganic Zinc-Rich

French version of product datasheet is currently not available.

GET THE LATEST NEWS AND UPDATES BY EMAIL FROM TNEMEC

support documents