find your coatings consultants
Find and contact a coatings consultant near you.

Series 218-1000 | MortarClad

Generic Type Epoxy Modified Cementitious Mortar
Common Usage A high-performance, aggregate reinforced material for surfacing, patching and filling voids and bugholes in concrete substrates. Generally topcoated with a variety of high-performance epoxies and polyurethanes for use in mild to aggressive exposures.
Colors Greenish Gray
Surfacer/Filler/Patcher Series 217
Primers Concrete: Self-priming
CMU: Self-priming
Topcoats Series 20, 20HS, FC20HS, 22, FC22, 27WB, 30, 46H-413, 61, 66, 66HS, 161HS, L69, N69, 104, 120, L140, N140, V140, 161, 201, 205, 237SC, 239SC, 251SC, 252, 262 †, 264 †, 270, 280, 282, 406 †, 434, 435, 436, 446. Note: Refer to the applicable topcoat data sheet for additional information regarding color availability.
† See the corresponding PDS for the recommended intermediate coat.
Volume Solids 100% (mixed)
Recommended DFT Parge Coat: 1/16"-1/4" per lift; maximum 1/2" thickness
Feather-edge Capable: 1/32"
Curing Time
TemperatureTo TouchTo Recoat with ItselfTo Topcoat
75°F (24°C) & 50% R.H.3-4 hoursunlimited15 hours minimum
Volatile Organic Compounds Unthinned: .013 lbs/gallon (1.6 grams/litre)
HAPS 0.00 lbs/gal solids
Number of Components Three—Liquid: Part A and Part B Powder: Part C
1
Category
2
Chemical Name(required)
3
Concentration
4
What is this?

Note: Not Recommended (NR), Not Tested (NT), Please Call (PC)

 

Chemical Recommended Use - What is this?

The chemical resistance data listed on this website should only be used for general reference purposes. Substrates, temperatures, chemical combinations, and other variables can affect the performance of a coating in chemical exposure. Please contact your local to finalize the most appropriate system for your project.

Click the following button to download a PDF of the list of chemicals below.

1 Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates    to product's performance capabilities only.

2 Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.


Recommended Use
Chemical Occasional Contact Frequent Contact Secondary Containment Cargo Immersion Immersion Service

1 Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates    to product's performance capabilities only.

2 Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.

  • Color cards, swatches and fan decks are offered at no charge, by request , for more accurate color selection. Expert custom color matching is also available by contacting your Tnemec Coatings Consultant .
  • Deeptone colors may be more expensive than lighter colors. Please contact your Tnemec Coatings Consultant to verify product/color availability and pricing.
These digital colors should not be used to finalize your color selection. Please read our disclaimer . Use the color swatch tool on the left to request official color swatches.

Color Swatch Packet

Request another

(maximum 6 color swatches)

You haven't added any color swatches to your packet. Select some colors now by clicking a color above and then clicking the 'Request a Swatch' button on the color.

The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.

This ProductEpoxy Modified Cementitious Mortar

French version of product datasheet is currently not available.