find your coatings consultants
Find and contact a coatings consultant near you.

Series 66HS | Hi-Build Epoxoline

Generic Type Polyamide Epoxy
Common Usage A high-solids, low VOC, pure polyamide epoxy that offers exceptional protection to a variety of substrates in atmospheric and immersion environments. Applied as a primer, intermediate, or topcoat, this versatile coating also accepts a wide-range of finish coats, allowing for a coating system tailored to specific exposure conditions.
Colors Refer to Tnemec Color Guide. Note: Epoxies chalk with extended exposure to sunlight and may yellow on aging. Lack of ventilation, incomplete mixing, miscatalyzation or the use of heaters that emit carbon dioxide and carbon monoxide during application and initial stages of curing may accelerate any potential yellowing. Note: Special color bases are recommended for immersion service. Contact your Tnemec representative for more information.
Finish Satin
Surfacer/Filler/Patcher 215, 217, 218
Primers Steel: Self-priming or Series 1, 20HS, FC20HS, 27, 27WB, 90-97, 90-98, 90E-92, 90G-1K97, 91-H2O, 94-H2O, 394, V530, 161HS
Concrete: Self-priming, 20HS, FC20HS, 161HS
CMU: Self-priming, 130, 1254
Topcoats 46H-413, 27WB, 30, 66HS, 72, 73, 104, 113, 114, 115, 141, 161HS, 262, 265, 290, 291, 740, 750, 1026, 1028, 1029, 1070, 1070V, 1071, 1071V, 1072, 1072V, 1074, 1074U, 1075, 1075U, 1080, 1081, 1095. Refer to COLORS on applicable topcoat data sheets for additional information. Note: When topcoating Series 66HS, the following maximum recoat times apply: with 262 or 265, 7 days; with 740 or 750, 21 days; with 1095, 30 days; with itself, 46H-413, 27WB, 104, 113, 114, 141, 161HS, 290, 291, 1028, 1029, 1070, 1070V, 1071, 1071V, 1072, 1072V, 1080 or 1081, 60 days; with 72, 73, 1074, 1074U, 1075 or 1075U, 90 days. Scarify the Series 66HS surface before topcoating if maximum recoat time has elapsed.
Volume Solids 78% ± 2.0% (mixed) †
Recommended DFT 2.0 to 10.0 mils (50 to 254 microns) per coat.
Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.
Curing Time
TemperatureTo Touch To HandleTo RecoatImmersion
95°F (35°C) 1 hour 3 hours 6-7 hours 7 days
75°F (24°C)2 hours8 hours12-16 hours 7 days
55°F (13°C) 4 hours 22-24 hours 30-34 hours 12-14 days
Curing time varies with surface temperature, air movement, humidity and film thickness. Note: For faster curing and low temperature applications, add No. 44-705 Epoxy Accelerator, see separate product data sheet for cure information.
Ventilation: When used as a tank lining or in enclosed areas, provide adequate ventilation during application and cure.
Volatile Organic Compounds Unthinned: 1.54 lbs/gallon (184 grams/litre)
Thinned 10% (No. 4 Thinner): 2.02 lbs/gallon (243 grams/litre)
Thinned 20% (No. 4 Thinner): 2.43 lbs/gallon (292 grams/litre)
HAPS Unthinned: 1.17 lbs/gal solids
Thinned 10% (No. 4 Thinner): 1.88 lbs/gal solids
Thinned 20% (No. 4 Thinner): 2.60 lbs/gal solids
Theoretical Coverage 1,249 mil sq ft/gal (30.7 m²/L at 25 microns). See APPLICATION for coverage rates. †
Number of Components Two: Part A (epoxy) and Part B (polyamide)

Chemical Recommended Use - What is this?

The chemical resistance data listed on this website should only be used for general reference purposes. Substrates, temperatures, chemical combinations, and other variables can affect the performance of a coating in chemical exposure. Please contact your local to finalize the most appropriate system for your project.

Click the following button to download a PDF of the list of chemicals below.

1 Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates    to product's performance capabilities only.

2 Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.


Recommended Use
Chemical Occasional Contact Frequent Contact Secondary Containment Cargo Immersion Immersion Service
1, 1, 1-Trichloroethane

Also Known As: Trichloroethane

100°F (38°C)
Acetaldehyde NR NR NR NR NR
Acetic Acid
Acetic Acid, Glacial NR NR NR NR NR
Acetic Anhydride
Acetone 100°F (38°C)
Acetonitrile
Acrylic Acid
Acrylic Latex Solution PC PC PC PC PC
Acrylonitrile
Activated Carbon (non food contact) 100°F (38°C) 100°F (38°C)
Adipic Acid (Dry) 100°F (38°C)
Allyl Chloride NR NR NR NR NR
Aluminum Chloride
Aluminum Hydroxide 100°F (38°C) 100°F (38°C)
Aluminum Nitrate
Aluminum Sulfate

Also Known As: Alum

Ammonium Bisulfite 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Ammonium Carbonate PC PC PC PC PC
Ammonium Chloride
Ammonium Fluoride NR NR NR NR NR
Ammonium Hydroxide
Ammonium Lauryl Sulfate
Ammonium Nitrate (non food contact)
Ammonium Nitrite
Ammonium Perchlorate (Dry) NR NR NR NR NR
Ammonium Persulfate
Ammonium Phosphate 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Ammonium Sulfate 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Ammonium Sulfide 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Ammonium Sulfite PC PC PC PC PC
Amyl Acetate 100°F (38°C)
Aniline
Animal Fats PC PC PC PC PC
Aqua Ammonia 100°F (38°C) 100°F (38°C) 100°F (38°C)
Aqua Regia (non food contact) NR NR NR NR NR
Aviation Gas PC PC PC PC PC
Barium Chloride (non food contact)
Barium Hydroxide (non food contact)
Barium Nitrate 100°F (38°C) 100°F (38°C) NR NR NR
Barium Sulfate 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Barium Sulfide 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Beer (non-food contact) PC PC PC PC PC
Benzene 100°F (38°C) 100°F (38°C)
Benzene Sulfonic Acid NR NR NR NR NR
Benzoic Acid NR NR NR NR NR
Benzoyl Chloride PC PC PC PC PC
Benzyl Alcohol 100°F (38°C)
Benzyl Chloride PC PC PC PC PC
Borax 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Boric Acid
Butyl Acrylate NR NR NR NR NR
Butyl Amine NR NR NR NR NR
Butyric Acid NR NR NR NR NR
Cadmium Bromide
Cadmium Chloride
Cadmium Plating (Cyanide) NR NR NR NR NR
Calcium Bisulfate NR NR NR NR NR
Calcium Bromide 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Calcium Carbonate 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Calcium Chloride
Calcium Hydroxide

Also Known As: Lime Slurry

Calcium Hypochlorite
Calcium Nitrate 100°F (38°C) 100°F (38°C) NR NR NR
Calcium Nitrite 100°F (38°C)
Calcium Oxide 100°F (38°C) 100°F (38°C) NR NR NR
Calcium Sulfate 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Calcium Sulfite 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Caprolactam PC PC PC PC PC
Carbon Disulfide PC PC PC PC PC
Carbon Tetrachloride PC PC PC PC PC
Castor Oil 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Chlorine Dioxide PC PC PC PC PC
Chlorobenzene NR NR NR NR NR
Chloroform NR NR NR NR NR
Chlorosulfonic Acid NR NR NR NR NR
Chromic Acid
Citric Acid
Coal (high and low sulfur) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Cola (non-food contact) 100°F (38°C) 100°F (38°C) 100°F (38°C) NR NR
Copper Acetate
Copper Chloride PC PC PC PC PC
Copper Sulfate
Copper Sulfate (dry) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Corn Mash Solution (non-food contact) 100°F (38°C)
Corn Oil (non-food contact) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Cottonseed Oil (non-food contact) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Cresylic Acid NR NR NR NR NR
Crude Oil (Sour) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Crude Oil (Sweet) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Cumene Hydroperoxide NR NR NR NR NR
Cuprous Chloride 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Cyclohexane 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Cyclohexanol PC PC PC PC PC
Cyclohexanone PC PC PC PC PC
Cyclohexlamine NR NR NR NR NR
Dextrose 100°F (38°C) - NR 100°F (38°C) - NR 100°F (38°C) 100°F (38°C) - NR 100°F (38°C) - NR
Diacetone Alcohol NR NR NR NR NR
Dibutyl Phthalate 100°F (38°C) 100°F (38°C) NR NR NR
Diesel Fuel

Also Known As: Fuel Oil, Diesel Oil

100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)

1 Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates    to product's performance capabilities only.

2 Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.

  • Color cards, swatches and fan decks are offered at no charge, by request , for more accurate color selection. Expert custom color matching is also available by contacting your Tnemec Coatings Consultant .
  • Deeptone colors may be more expensive than lighter colors. Please contact your Tnemec Coatings Consultant to verify product/color availability and pricing.

Products Available In Tnemec White- Pool P001

Tnemec White- Pool| P001 rgb 248,253,254
Swatch Unavailable
These digital colors should not be used to finalize your color selection. Please read our disclaimer . Use the color swatch tool on the left to request official color swatches.

Color Swatch Packet

Request another

(maximum 6 color swatches)

You haven't added any color swatches to your packet. Select some colors now by clicking a color above and then clicking the 'Request a Swatch' button on the color.

The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.

This ProductPolyamide Epoxy

GET THE LATEST NEWS AND UPDATES BY EMAIL FROM TNEMEC

support documents