find your coatings consultants
Find and contact a coatings consultant near you.

Series 6 | Tneme-Cryl

Generic Type Acrylic Emulsion
Common Usage Industrial grade, matte finish, water-based coating with excellent color retention. Good overall protection for most interior/exterior surfaces in mild to moderately severe exposures. Application methods include “dry-fall” under certain conditions (see Application).
Colors Refer to Tnemec Color Guide.
Finish Matte
Primers Steel: Series 10, 37H, 90. Primers dry film thickness should be at least 2.0 mils (50 microns) above the peaks of the blast profile. (Reference SSPC-PA2). Note: If previous coats contain pinholes to bare steel, flash rusting may occur. Two coats of Series 10 or 37H are required under Series 6. When Series 90 or 37H is used as a primer, two coats of Series 6 are required as a topcoat.
Galvanized Steel: Self-priming
CMU: 54-562 or 130
Wood: 36-603 or 151-1051
Self-priming or 151-1051 on concrete, masonry, fiberboard and drywall.
Note: Certain colors may require multiple coats depending on method of application and finish coat color. Preceding coat should be in the same color family but noticeably different.
Volume Solids 43.0 ± 2.0% †
Recommended DFT 2.0 to 3.0 mils (50 to 75 microns) per coat. Note: Number of coats required will vary depending on color, substrate (surface) and other variables. Contact your Tnemec representative.
Curing Time
Temperature To Touch To Handle To Recoat
75°F (24°C) 1/2 hour 2 hours 2 hours

Curing time varies with surface temperature, air movement, humidity and film thickness.
Water Tank Exteriors: Five days or more curing time required before filling with water.
Volatile Organic Compounds Unthinned: 1.44 lbs/gallon (172 grams/litre)
Thinned 5%: 1.44 lbs/gallon (172 grams/litre) †
Theoretical Coverage 690 mil sq ft/gal (16.9 m²/L at 25 microns). See APPLICATION for coverage rates. †
Number of Components One
1
Category
2
Chemical Name(required)
3
Concentration
4
What is this?

Note: Not Recommended (NR), Not Tested (NT), Please Call (PC)

 

Chemical Recommended Use - What is this?

The chemical resistance data listed on this website should only be used for general reference purposes. Substrates, temperatures, chemical combinations, and other variables can affect the performance of a coating in chemical exposure. Please contact your local to finalize the most appropriate system for your project.

Click the following button to download a PDF of the list of chemicals below.

*Results are NOT suitable for direct or indirect food contact. Intended use exposure results relate to product's performance and substrate protection capabilities only.


Recommended Use
Chemical <90°F (32°C) 90-120°F
(32-49°C)
120-140°F
(49-60°C)
140-160°F
(60-71°C)
160-180°F
(71-82°C)
180-200°F
(82-93°C)
200-220°F
(93-104°C)
*Results are NOT suitable for direct or indirect food contact. Intended use exposure results relate to product's performance and substrate protection capabilities only.
  • Color cards, swatches and fan decks are offered at no charge, by request , for more accurate color selection. Expert custom color matching is also available by contacting your Tnemec Coatings Consultant .
  • Deeptone colors may be more expensive than lighter colors. Please contact your Tnemec Coatings Consultant to verify product/color availability and pricing.

Products Available In Clover 110GN

Clover| 110GN (formerly EN07) rgb 129,134,97
Request a Swatch Swatch Unavailable
These digital colors should not be used to finalize your color selection. Please read our disclaimer . Use the color swatch tool on the left to request official color swatches.

Color Swatch Packet

Request another

(maximum 6 color swatches)

You haven't added any color swatches to your packet. Select some colors now by clicking a color above and then clicking the 'Request a Swatch' button on the color.

The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.

This ProductAcrylic Emulsion

GET THE LATEST NEWS AND UPDATES BY EMAIL FROM TNEMEC

support documents