Generic Type Advanced Thermoset Solution Fluoropolymer
Common Usage A low VOC exterior finish coat especially designed for tanks and other exposed steel substrates. This product has outstanding resistance to ultra-violet light degradation providing unprecedented long-term gloss and color retention with excellent resistance to abrasion and chalking. It is aesthetically pleasing and recommended for coastal environments and on structures where extremely long-term maintenance cycles are desired. NOT FOR IMMERSION SERVICE.
Colors Refer to Tnemec Color Guide. Note: Certain colors may require multiple coats depending on method of application and finish coat color. The preceding coat should be in the same color family, but noticeably different. Upon selection of the finish coat color, the intermediate coat color will be selected by Tnemec's color lab.
Finish Semi-Gloss
Primers Series 1, 27, 27WB, 66, L69, N69, 90-97, 91-H2O, 94-H2O, 135, L140, N140, 161
Intermediate Series 73, 1075, 1075U
Note: When topcoating with Series V701, the following maximum recoat times apply: Over 1075, 1075U and itself, 30 days; over 73, 90 days.
Volume Solids 56.0 ± 2.0% (mixed) †
Recommended DFT 2.0 to 3.0 mils (50 to 75 microns) per coat. Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.
Curing Time
TemperatureTo TouchTo HandleMinimum Recoat ‡
70°F (21°C)1 hour6-8 hours10-12 hours
‡ Maximum recoat: 30 days. Curing time varies with surface temperature, air movement, humidity and film thickness.
Volatile Organic Compounds Unthinned: 0.81 lbs/gallon (97 grams/litre)
Thinned 10% (No. 65 Thinner): 0.81 lbs/gallon (97 grams/litre)
Thinned 10% (No. 63 Thinner): 1.58 lbs/gallon (189 grams/litre) (TBAc Exempt)
Thinned 8% (No. 63 Thinner): 2.03 lbs/gallon (244 grams/litre) (TBAc Non-Exempt) †
Theoretical Coverage 898 mil sq ft/gal (21.7 m²/L at 25 microns) †
Number of Components Two: Part A and Part B