find your coatings consultants
Find and contact a coatings consultant near you.

Series 435 | Perma-Glaze

Generic Type Modified Polyamine Epoxy
Common Usage A versatile, thick film, 100% solids, abrasion-resistant lining specifically designed for wastewater immersion and fume environments. Provides low permeation to H2S gas, protects against MIC and provides chemical resistance to severe wastewater environments.
Colors 5020 Gray, 5023 Beige. Note: Epoxies chalk with extended exposure to sunlight.
Finish Gloss
Surfacer/Filler/Patcher Series 215, 217, 218.
Primers Concrete: Self-priming or Series 201.
Steel: Self-priming or Series N69. Note: Series 435 must be applied to Series N69 within 7 days. Scarify the surface with fine abrasive before topcoating if exceeding this maximum recoat window.
Intermediate Series 434 or 436 (optional)
Volume Solids 100% (mixed)
Recommended DFT Steel: 15.0 to 40.0 mils (380 to 1015 microns) in one or two coats.
Concrete: 30.0 to 40.0 mils (760 to 1015 microns) in one or two coats.
Hi-Build Option: 40.0 to 80.0 mils (1015 to 2030 microns) in one or two coats.
Glaze Coat Option (over Series 434 or 436): 15.0 to 20.0 mils (380 to 510 microns).
Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.
Curing Time
Temperature To Touch Dry Through To Place in Service Max. Recoat
75°F (24°C) 3 hours 14 hours 2 days 7 days
55°F (13°C) 7 hours 30 hours 3 days 7 days
Note: If more than 7 days have elapsed between coats, the Series 435 coated surface must be mechanically abraded before topcoating. Curing time will vary with surface temperature, air movement, humidity and film thickness. Note: Use “To Touch” cure information for minimum recoat times if succeeding coats are spray-applied and “Dry Through” if succeeding topcoats are applied by roller or brush.
Volatile Organic Compounds EPA Method 24: 0.23 lbs/gallon (27 grams/litre)
HAPS 0.11 lbs/gal solids
Theoretical Coverage 1,604 mil sq ft/gal (39.4 m²/L at 25 microns). See APPLICATION for coverage rates.
Number of Components Two: Part A (Amine) and Part B (Epoxy)

Chemical Recommended Use - What is this?

The chemical resistance data listed on this website should only be used for general reference purposes. Substrates, temperatures, chemical combinations, and other variables can affect the performance of a coating in chemical exposure. Please contact your local to finalize the most appropriate system for your project.

Click the following button to download a PDF of the list of chemicals below.

*Results are NOT suitable for direct or indirect food contact. Intended use exposure results relate to product's performance and substrate protection capabilities only.

Recommended Use
Chemical <90°F (32°C) 90-120°F
1, 1, 1-Trichloroethane

Also Known As: Trichloroethane

Acetaldehyde NR
Acetic Acid
Acetic Acid, Glacial NR
Acetic Anhydride
Acetone PC
Acrylic Acid
Acrylic Latex Solution NR
Activated Carbon IS
Adipic Acid (Dry) FC
Allyl Chloride NR
Aluminum Chloride
Aluminum Hydroxide PC
Aluminum Nitrate
Aluminum Sulfate

Also Known As: Alum

Ammonium Bisulfite IS
Ammonium Carbonate PC
Ammonium Chloride
Ammonium Fluoride NR
Ammonium Hydroxide
Ammonium Lauryl Sulfate NR
Ammonium Nitrate
Ammonium Nitrite
Ammonium Perchlorate (Dry) IS
Ammonium Persulfate
Ammonium Phosphate IS
Ammonium Sulfate IS
Ammonium Sulfide IS
Ammonium Sulfite PC
Amyl Acetate FC
Animal Fats PC
Aqua Ammonia PC
Aqua Regia OC
Aviation Gas PC
Barium Chloride
Barium Hydroxide
Barium Nitrate IS
Barium Sulfate IS
Barium Sulfide IS
Beer (non-food contact)* PC
Benzene PC
Benzene Sulfonic Acid NR
Benzoic Acid NR
Benzoyl Chloride PC
Benzyl Alcohol OC
Benzyl Chloride PC
Borax IS
Boric Acid
Butyl Acrylate NR
Butyl Amine NR
Butyric Acid NR
Cadmium Bromide
Cadmium Chloride
Cadmium Plating (Cyanide) NR
Calcium Bisulfate NR
Calcium Bromide IS
Calcium Carbonate IS
Calcium Chloride
Calcium Hydroxide

Also Known As: Lime Slurry

Calcium Hypochlorite
Calcium Nitrate IS
Calcium Nitrite OC
Calcium Oxide IS
Calcium Sulfate IS
Calcium Sulfite IS
Caprolactam PC
Carbon Disulfide PC
Carbon Tetrachloride PC
Castor Oil PC
Chlorine Dioxide PC
Chlorobenzene NR
Chloroform NR
Chlorosulfonic Acid NR
Chromic Acid
Citric Acid
Coal (high and low sulfur) IS
Cola (non-food contact)* IS
Copper Acetate
Copper Chloride IS
Copper Sulfate
Copper Sulfate (dry) IS
Corn Mash Solution (non-food contact)* IS
Corn Oil (non-food contact)* IS
Cottonseed Oil (non-food contact)* IS
Cresylic Acid NR
Crude Oil (Sour) PC
Crude Oil (Sweet) PC
Cumene Hydroperoxide NR
Cuprous Chloride IS
Cyclohexane IS
Cyclohexanol IS
Cyclohexanone IS
Cyclohexlamine NR
Dextrose IS
Diacetone Alcohol PC
Dibutyl Phthalate IS
Diesel Fuel

Also Known As: Fuel Oil, Diesel Oil

*Results are NOT suitable for direct or indirect food contact. Intended use exposure results relate to product's performance and substrate protection capabilities only.
  • Color cards, swatches and fan decks are offered at no charge, by request , for more accurate color selection. Expert custom color matching is also available by contacting your Tnemec Coatings Consultant .
  • Deeptone colors may be more expensive than lighter colors. Please contact your Tnemec Coatings Consultant to verify product/color availability and pricing.

Products Available In Gray 5020

Gray| 5020 rgb 180,180,178
Swatch Unavailable
These digital colors should not be used to finalize your color selection. Please read our disclaimer . Use the color swatch tool on the left to request official color swatches.

Color Swatch Packet

Request another

(maximum 6 color swatches)

You haven't added any color swatches to your packet. Select some colors now by clicking a color above and then clicking the 'Request a Swatch' button on the color.

The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.

This ProductModified Polyamine Epoxy