High gloss industrial enamel offering good flow, hiding and protection for recommended surfaces in mild to moderately severe exposures. Not for use on surfaces that are continually wet or sweat..

Chemically active, rust-inhibitive primer for ferrous metals. Provides extended weathering for shop and field priming of structural and miscellaneous steel. Series 10-99W can also be used as..

This product has been discontinued. Please refer to Series 1029 | Enduratone for a suitable alternative, or contact your Tnemec Coating Consultant.

Semi-gloss industrial enamel. Good flow, hiding and protection for most surfaces in mild to moderately severe exposures. Not for use on surfaces that are continually wet or sweat frequently.

An advanced generation, low odor, high solids, water-based epoxy coating for protection and finishing of steel and concrete. For use on the interior and exterior of tanks, pipes and equipment...

Lead- and chromate-free, fast-drying, corrosion-resistant primer that accepts a variety of high-performance topcoats. Ideally suited for steel fabricators, OEM’s and field applications where..

A disappearing colorant (patent pending) to aid in the uniform application of the clear coat. Adding Series 44-500 Skip-Saf to Series 76 and Series 1076 will temporarily provide a color..

Special additive for use with select epoxies to accelerate the cure rate and allow for coating application at temperatures down to 35°F (2°C).

Special additive for Series 740/750 UVX affording low temperature application and faster moisture resistance.

Single component coating for filling surface voids in porous concrete and masonry block on interior, dry, above-grade masonry surfaces.

Industry standard for epoxy coatings for over 30 years. Known for its forgiving application characteristics in adverse and varied conditions, and for benchmark performance.

A versatile low VOC, factory accelerated epoxy for protection and finishing of steel and concrete. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact..

An advanced generation epoxy for the protection and finishing of steel and concrete. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure...

An advanced generation epoxy for the protection and finishing of steel and concrete. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure...

This product has been discontinued. Please refer to Series 1070 | Fluoronar for a suitable alternative, or contact your Tnemec Coating Consultant.

A unique clear coat used to both enhance the finish and extend the long-term weathering qualities of pigmented Endura-Shield. Resists most graffiti markings.

A high-build, ceramic-like coating that provides excellent protection and easy cleaning. May be applied to both steel and concrete providing excellent resistance to abrasion, staining and many..

This product has been discontinued. Please contact your Tnemec Coatings Consultant for a suitable alternative.

An advanced technology, single-component, moisture-cured, zinc-rich primer providing extraordinary performance, user-friendly and easy application. Also used for field touch-up of inorganic..

An advanced technology, two-component, moisture-cured, zinc-rich primer providing extraordinary performance. It’s user friendly and rapid curing so chemical- and corrosion-resistant topcoats..

Self-curing, corrosion-resistant steel primer with tenacious bonding and abrasion resistance qualities. Its galvanic action resists undercutting. Excellent stand alone performance in high temperature..

High performance coating suitable for concrete, steel and other commonly used building materials. Features include high-build, low odor, non-yellowing white and fade resistant colors; easy cleanup..

Exceptional filling capabilities for interior/exterior porous concrete and CMU. Seals and primes surface for application of a variety of high performance water- and solvent-based topcoats in..

Versatile epoxy coating for protection and finishing of steel. It has excellent resistance to abrasion and is suitable for immersion service. This product can be used for lining storage tanks..

Penetrating, flexible and low-odor primer for sealing cementitious and other porous substrates. Also excellent as a tie-coat for specialized finishes over sound existing coatings.

Flexible, breathable coating primarily for concrete and masonry that can fill and bridge minor hairline cracks. Excellent elastomeric protection against driving rain, alternate freezing-thawing..

A durable coating specially formulated to resist mildew growth on the paint film. Permeable and flexible, it’s capable of bridging cracks and can withstand minor substrate movement, frequent..

A coating highly resistant to abrasion, wet conditions, corrosive fumes, chemical contact and exterior weathering. High build quality combines with project specific primers for two-coat, labor..

Decorative, high-build protection against weather, driving rain, industrial fumes and alternate freezing-thawing. Formulated to resist mildew growth on the paint film. Available in smooth and..

A low viscosity, high-solids, moisture tolerant epoxy used to prime and seal concrete floors. Especially useful when penetration is needed to sufficiently anchor thin-film epoxy flooring systems..

Flexible epoxy underlayment for bridging small substrate cracks in concrete and to provide a protective waterproof membrane under aggregate reinforced flooring systems.

Provides enhanced slip-resistance for added safety in select StrataShield topcoats.

A high-performance, aggregate reinforced material for surfacing, patching and filling voids and bugholes in concrete substrates. Generally topcoated with a variety of high-performance epoxies..

A decorative mortar floor-topping system installed at 3/16” to 1/4” thickness. Protects against impact, abrasion and mild chemicals with an aesthetically pleasing appearance.

A multi-purpose, broadcast, slurry broadcast or mortar applied floor topping system installed at 1/8” to 1/4” thickness. Protects against impact, abrasion and mild chemicals.

A glaze-like corrosion resistant coating for walls, ceilings, floors and other surfaces; resistant to frequent pressurized hot water and detergent cleaning. Used as a topcoat/sealer for heavy..

A clear finish for decorative flooring systems. It protects against mild chemicals, impact and abrasion, providing a skid-resistant or smooth finish depending on the number of coats.

A low odor, rapid cure, wear-resistant coating for floors, walls and other substrates, capable of withstanding moderate commercial and industrial environments. It can withstand mild to moderate..

Extremely hard, chemical-resistant polyurethane floor coating with superb flow characteristics. Excellent resistance to abrasion, wet conditions, corrosive fumes and chemical contact. Gloss..

Extremely hard, chemical-resistant clear urethane floor coating used as a finish coat for a variety of floor coating systems. It has superb flow characteristics, excellent resistance to abrasion,..

Low odor, fast dry, low VOC, waterborne polyurethane coating for interior wall and floor applications. Provides enhanced abrasion resistance, stain resistance and color stability. This user..

Aluminum pigmented primer or finish for marginally cleaned steel. Provides excellent abrasion-, moisture-, chemical- and corrosion-resistance. Suitable for use as a topcoat where an aluminum..

Conformal Stain WB is a penetrating, water-based masonry stain for horizontal concrete and virtually all vertical, above-grade concrete, precast, GFRC, exposed aggregate, stucco, terra cotta,..

Phylon WB is a non-yellowing, water-based, acrylic coating that highlights the natural color of masonry by providing a clear, gloss sheen. Phylon WB can also be used for most painted concrete..

Conformal Clear is a penetrating, solvent-based masonry coating for virtually all vertical, above-grade concrete, precast, GFRC, exposed aggregate, stucco, terra cotta, brick and block masonry...

Series 626 Dur A Pell GS has been formulated to provide superior protection against, and easy removal of, unwanted graffiti. This product is intended for use in conjunction with Series 680..

Concrete, stone and masonry treated with diluted Prime-A-Pell H₂O Concentrate resist water intrusion, stain damage, freeze/thaw spalling, efflorescence and rust damage.

Concrete, stone and masonry treated with Dur A Pell 10 resist water and chloride ion intrusion, stain damage, freeze/thaw spalling, efflorescence and rust damage.

Concrete, stone and masonry treated with Prime-A-Pell 200 resist water intrusion, stain damage, freeze/thaw spalling, efflorescence and rust damage.

Concrete, natural stone and masonry treated with Prime-A-Pell N.S. resist water intrusion, stain damage, freeze/thaw spalling, efflorescence and rust damage.

This product has been discontinued. Please refer to Series 668 | Deck A Pell 40 for a suitable alternative, or contact your Tnemec Coating Consultant.

Concrete, stone and masonry treated with Deck A Pell 15 resist water and chloride ion intrusion, stain damage, freeze/thaw spalling, efflorescence and rust damage.

Liquid cleaner used in association with Chemprobe Series 626 Dur A Pell GS to remove graffiti from block, brick, concrete, stone and other porous masonry substrates. May also be used alone..

An advanced technology polyurethane finish coat combining low VOC with exceptional performance. Offers superior color and gloss retention for long-term aesthetics on a wide range of exterior..

Water-based, low VOC, High Dispersion Pure acrylic polymer coating providing excellent long term protection in both interior/exterior exposures. May be applied by spray, brush or roller over..

A high-solids fluoropolymer coating that provides an ultra-durable finish with user friendly brush, roll and conventional spray application. It has outstanding color and gloss retention even..

A high-solids fluoropolymer coating that provides an ultra-durable finish with user friendly brush, roll and conventional spray application. It has outstanding color and gloss retention even..

A high-solids fluoropolymer coating that provides an ultra-durable finish with user friendly brush, roll and conventional spray application. It has outstanding color and gloss retention even..

A coating highly resistant to abrasion, wet conditions, corrosive fumes and exterior weathering. High build quality combines with project specific primers for two-coat, labor saving systems...

This product has been discontinued. Please refer to Series 1070 | Fluoronar for a suitable alternative, or contact your Tnemec Coating Consultant.

An exterior clear fluoropolymer finish coat especially designed to enhance the exterior weatherability of Fluoronar and HydroFlon. Fluoronar Clear has outstanding resistance to ultra-violet..

A high-solids fluoropolymer coating that provides an ultra-durable metallic or pearlescent finish with user friendly application. It has outstanding color and gloss retention even in the most..

A unique clear coat used to both enhance the finish and extend the long-term weathering qualities of metallic pigmented coatings. Resists most graffiti markings. Where VOC regulations apply,..

A waterborne polyurethane coating that provides excellent abrasion resistance and color and gloss retention for exterior applications to steel, concrete and other miscellaneous substrates. It..