home•products
Note: Not Recommended (NR), Not Tested (NT), Please Call (PC)
A single component, moisture-cured resin, containing a proprietary blend of...
High gloss industrial enamel offering good flow, hiding and protection...
A low VOC, high solids, high gloss industrial enamel offering...
Chemically active, rust-inhibitive primer for ferrous metals. Provides extended weathering...
Chemically active, rust-inhibitive primer for ferrous metals. This low VOC...
Industry standard for potable water epoxy coatings for nearly 30...
Fast-curing protective coating for use in steel and concrete potable...
A high-solids, lower VOC version of Tnemec’s proven polyamide epoxy...
An advanced generation, 100% solids, high-build epoxy for the protection...
An advanced generation, 100% solids epoxy liner for the protection...
This product has been discontinued. Please refer to Series 1029 | Enduratone for a suitable alternative, or contact your Tnemec Coatings Consultants Semi-gloss industrial enamel. Good flow, hiding and protection for most...
Versatile low-temperature coating ideally suited for steel fabrication and OEM...
A unique, low odor, low VOC, water-based epoxy coating featuring...
An advanced technology, direct-to-metal, corrosion-inhibiting coating with very good early...
Lead- and chromate-free, fast-drying, corrosion-resistant primer that accepts a variety...
All thinners are classified under Series 41. Product datasheets are...
Metallic aluminum finish for protection against weather, heat and mild...
A disappearing colorant (patent pending) to aid in the uniform...
Please contact your Tnemec Coatings Consultant for specific application instructions....
Special additive for use with select epoxies to accelerate the...
Special additive for use with Series 66HS or 20HS to...
Special additive for most Tnemec urethane coatings affording low temperature...
Special additive for Series 740/750 UVX affording low temperature application...
An additive that increases the film build characteristics of Series...
An additive package to promote the adhesion and corrosion protection...
Versatile coal tar coating for use in immersion, splash and...
High-build corrosion resistant coating providing one coat protection for concrete...
A corrosion resistant coating providing protection for concrete and steel...
A multi-purpose epoxy coating with fast-cure and low temperature application...
A high-solids, low VOC epoxy coating used for a multitude...
A waterborne primer-sealer for uncoated drywall in interior dry environments.
Single component coating for filling surface voids in porous concrete...
Tightly cross-linked epoxy with excellent corrosion and chemical resistance. Principally...
This product has been discontinued. Please refer to Series 215 | Surfacing Epoxy for a suitable alternative, or contact your Tnemec Coatings Consultants A non-shrinking, trowel-grade filler and surfacer for concrete or steel,...
Industry standard for epoxy coatings for over 30 years. ...
A high-solids, low VOC, pure polyamide epoxy offering exceptional protection...
A versatile low VOC epoxy for protection and finishing of...
A versatile low VOC, factory accelerated epoxy for protection and...
An advanced generation epoxy for protection and finishing of steel...
An advanced generation epoxy for the protection and finishing of...
This product has been discontinued. Please refer to Series 66HS | Hi-Build Epoxoline for a suitable alternative, or contact your Tnemec Coatings Consultants An advanced generation epoxy for protection and finishing of steel...
This product has been discontinued. Please refer to Series 161HS | Tneme-Fascure for a suitable alternative, or contact your Tnemec Coatings Consultants An advanced generation epoxy for the protection and finishing of...
A low VOC coating highly resistant to abrasion, wet conditions,...
A coating highly resistant to abrasion, wet conditions, corrosive fumes,...
This product has been discontinued. Please refer to Series 1070 | Fluoronar for a suitable alternative, or contact your Tnemec Coatings Consultants A unique clear coat used to both enhance the finish...
This product has been discontinued. Please refer to Series 1070 | Fluoronar for a suitable alternative, or contact your Tnemec Coatings Consultants A unique satin urethane clear coat used to both enhance...
A high solids, single component, silicone-alkyd finish coat that provides...
A high-build, ceramic-like coating that provides excellent protection and easy...
Fast-dry, lead- and chromate-free, rust-inhibitive shop primer for structural and...
An advanced technology, single-component, moisture-cured, zinc-rich primer providing extraordinary performance,...
Self-curing, primer/finish with tenacious bonding and abrasion resistance qualities. Its...
An advanced technology, two-component, moisture-cured, zinc-rich primer providing extraordinary performance....
Self-curing, corrosion-resistant steel or ductile iron primer with tenacious bonding...
A two-component, moisture-cured, zinc-rich primer for the interior and exterior...
A single-component, moisture-cured, zinc-rich primer for steel structures, including the...
Versatile coating applies up to 10 mils per coat on...
High performance coating suitable for concrete, steel and other commonly...
High performance gloss coating suitable for concrete, steel and other...
A high-performance, versatile coating appropriate for a variety of uses...
A high-build, rust-inhibitive, elastomeric coating formulated for exceptional adhesion and...
A finish coat designed for superior protection against organic and...
A primer designed for superior protection against organic and inorganic...
Exceptional filling capabilities for interior/exterior porous concrete and CMU. Seals...
High-build coating with superior wetting for marginally prepared rusty steel...
Versatile epoxy coating for protection and finishing of steel. It...
Versatile epoxy coating (factory accelerated version of L140) for protection...
Innovative potable water coating which offers high-build edge protection and...
High solids coating offering high-build edge protection and excellent corrosion...
Penetrating, flexible and low-odor primer for sealing cementitious and other...
Flexible tape provides reinforcement for coatings that will bridge cracks...
Flexible, breathable coating primarily for concrete and masonry that can...
A durable coating specially formulated to resist mildew growth on...
Low temperature-cure, corrosion-resistant coating for protection against abrasion, immersion and...
A high-solids, low VOC, pure polyamide epoxy offering excellent protection...
Decorative, high-build protection against weather, driving rain, industrial fumes and...
High-solids moisture tolerant epoxy used for priming concrete, wood and...
A fast-cure, versatile coating that can be used as a...
Flexible epoxy underlayment for bridging small substrate cracks in concrete...
Glass reinforced flexible epoxy mortar basecoat for bridging small substrate...
Epoxoprime MVT is a unique, moisture-tolerant, two component, low viscosity,...
A high gloss, high build, self-leveling epoxy topping for concrete...
Provides enhanced slip-resistance for added safety in select StrataShield topcoats.
Provides fiberglass mat reinforcement to epoxy & vinyl ester lining...
An advanced generation, 100% solids epoxy filler and surfacer for...
Series 215ML is a trowel applied, fiberglass mat reinforced, 100%...
A single-component, rapid setting, hydraulic cementitious resurfacer used to restore...
A high-performance, aggregate reinforced material for surfacing, patching and filling...
A decorative broadcast or slurry broadcast laminated floor-topping system installed...
A decorative mortar floor-topping system installed at 3/16” to 1/4”...
A customized decorative floor topping utilizing colored flake, broadcast either...
A multi-purpose epoxy coating that can be used as a...
A multi-purpose resin for fiberglass reinforced mat (65 mils) or...
A chemical resistant, multi-purpose novolac epoxy coating that can be...
A highly chemical resistant, multi-purpose resin for fiberglass reinforced mat...
Ultra-Tread MVT is a high performance moisture control system designed...
Ultra-Tread V is a low-odor mortar designed for troweling vertical...
Ultra-Tread M is a low odor mortar applied floor topping...
Ultra-Tread S is a low odor, slurry applied floor topping...
Ultra-Tread Glaze is a pigmented, high-build, low odor, polyurethane coating....
Extremely hard, chemical-resistant urethane floor coating with superb flow characteristics....
Extremely hard, chemical-resistant urethane floor coating with superb wear characteristics....
A chemical resistant primer for use with Series 252SC secondary...
An extremely fast-curing, multi-purpose and finish coat resin with low...
A chemically active, low voc solution used to promote the...
Chemical- and abrasion-resistant elastomeric membrane with exceptional strength and flexibility....
Flexible liner providing a seamless monolithic membrane for use in...
A trowel-grade compound for use with Elasto-Shield products. Used to...
A high-performance, fiberglass-reinforced wall coating for protection against acids, alkalis...
A fiberglass mat reinforced coatings system for walls and ceilings...
This product has been discontinued. Please refer to Series 270 | Stranlok for a suitable alternative, or contact your Tnemec Coatings Consultants A fiber-reinforced coating for protection against acids, alkalis and other...
A glaze-like corrosion resistant coating for walls, ceilings, floors and...
A high-gloss, glaze-like coating for concrete floors. It imparts a...
A highly chemical- and solvent-resistant colored novolac glaze coating for...
A clear finish for decorative flooring systems. It protects against...
A clear finish with an orange peel texture for diffusing...
A clear novolac finish for decorative flooring systems. It protects...
A low odor, rapid cure, wear-resistant coating for floors, walls...
Extremely hard, chemical-resistant urethane coating with excellent resistance to abrasion,...
Extremely hard, chemical-resistant polyurethane floor coating with superb flow characteristics....
Durable, chemical-resistant clear urethane floor coating used as a finish...
Extremely hard, chemical-resistant clear urethane floor coating used as a...
A clear, low odor, fast dry, low VOC, waterborne polyurethane...
Low odor, fast dry, low VOC, waterborne polyurethane coating for...
Internally reinforced, 100% solids epoxy lining that provides protection against...
A thick-film epoxy formulated for corrosion control and internal lining...
A high-build tightly cross-linked high performance epoxy with excellent resistance...
A 100% solids flexible polymer formulated for general use as...
Spray applied, 100% solids, high build, reinforced epoxy formulated for...
An epoxy internal lining formulated for corrosion control and aggressive...
This product has been discontinued. Please refer to Series 391 | Tank Armor for a suitable alternative, or contact your Tnemec Coatings Consultants A thick-film reinforced epoxy internal lining formulated for corrosion control...
An internal epoxy lining formulated for aggressive chemical immersion and...
Specially formulated, one-component, moisture-cured, micaceous iron oxide and zinc filled...
A thick-film reinforced epoxy internal lining formulated for corrosion control...
High-performance, polyurea elastomer, multi-purpose liner especially developed for outstanding abrasion...
A two-component, fast setting, monolithic coating designed to provide a...
A 100% solids, abrasion-resistant lining specifically designed for wastewater immersion...
A 100% solids, hybrid epoxy mortar designed for severe wastewater...
A versatile, thick film, 100% solids, abrasion-resistant lining specifically designed...
A thick film, 100% solids, spray-applied, abrasion-resistant coating designed for...
An advanced technology moisture-cured, hydrocarbon-modified coating providing excellent protection to...
Aluminum pigmented primer or finish for marginally cleaned steel. Provides...
Conformal Stain is a penetrating, solvent-based masonry stain for horizontal...
Conformal Stain WB is a penetrating, water-based masonry stain for...
Phylon 1422 is a non-yellowing, acrylic coating that highlights the...
Phylon WB is a non-yellowing, water-based, acrylic coating that highlights...
Phylon 624 is a unique acrylic copolymer, formulated to meet...
Conformal Clear is a penetrating, solvent-based masonry coating for virtually...
Series 626 Dur A Pell GS has been formulated to...
Series V626 Dur A Pell GS has been formulated to...
CT Densifyer is a clear, penetrating, water-based sealer for virtually...
Prime-A-Pell H_2_O Concentrate is a concentrated water-based water repellent requiring...
Prime-A-Pell H_2_O is a clear, filmless, low solids, penetrating water-based...
Dur-A-Pell 20 is a clear, filmless, penetrating water repellent for...
Prime-A-Pell 200 is a clear, filmless, penetrating water repellent for...
Prime-A-Pell Plus is a clear, filmless, penetrating water repellent for...
Prime-A-Pell N.S. (natural stone) is a clear, filmless, penetrating water...
Dur A Pell 40 is a clear, filmless, penetrating water...
Dur A Pell 100 is a clear, filmless, penetrating water...
This product has been discontinued. Please refer to Series 668 | Deck A Pell 40 for a suitable alternative, or contact your Tnemec Coatings Consultants Concrete, stone and masonry treated with Deck A Pell 15...
Liquid cleaner used in association with Chemprobe Series [626] and...
An exterior finish coat especially designed for tanks and other...
A low VOC exterior finish coat especially designed for tanks...
An advanced technology finish coat combining low VOC with exceptional...
An innovative, fluid-applied, thermal insulating coating utilizing aerogel particles that...
A durable, easy-to-use, water-based acrylic coating that offers long-wearing protection...
Water-based, low VOC, High Dispersion Pure acrylic polymer coating providing...
A high-solids fluoropolymer coating that provides an ultra-durable finish with...
A low VOC, fluoropolymer coating that provides an ultra-durable finish...
A coating highly resistant to abrasion, wet conditions, corrosive fumes...
This product has been discontinued. Please refer to Series 1070 | Fluoronar for a suitable alternative, or contact your Tnemec Coatings Consultants An exterior clear fluoropolymer finish coat especially designed to enhance...
An acrylic polyurethane finish coat that contains a sparkle aluminum...
A high-solids fluoropolymer coating that provides an ultra-durable metallic or...
A unique clear coat used to both enhance the finish...
A waterborne polyurethane coating that provides color and gloss retention...
A waterborne polyurethane coating that provides excellent abrasion resistance and...
A user friendly, low VOC, aliphatic polyurethane coating that provides...
An advanced generation, water-based epoxy coating that is low odor...
An advanced generation, low odor, low VOC, high solids, water-based...
A heat-resistant, corrosion-inhibitive, silicone alkyd primer that protects steel in...
A high-performance, two-component, zinc-rich, silicone copolymer that offers galvanic protection...
A specialized, direct-to-metal (DTM), corrosion inhibitive, aluminum silicone copolymer for...
An advanced, inert multipolymeric chemistry that provides high-performance direct-to-metal (DTM)...
A heat-resistant, acrylic silicone topcoat available in a wide range...
A modified silicone copolymer topcoat formulated for color stability and...
A versatile silicone copolymer coating applied direct-to-metal (DTM) or as...