Narrow Product List

Product Line
Project Type
Substrate
Generic Type
Special QualificationsWhat is this?
LEED NC
Recommended Use What is this?

Note: Not Recommended (NR), Not Tested (NT), Please Call (PC)

 

Need help finding a product?
Series 1 | Omnithane

A single component, moisture-cured resin, containing a proprietary blend of micaceous iron oxide and zinc to function as a primer which is field and shop friendly. May be used in OEM manufacturing,..

Series 2H | Hi-Build Tneme-Gloss

High gloss industrial enamel offering good flow, hiding and protection for recommended surfaces in mild to moderately severe exposures. Not for use on surfaces that are continually wet or sweat..

Series 2HS | Low VOC Tneme-Gloss

A low VOC, high solids, high gloss industrial enamel offering good flow, hiding and protection for recommended surfaces in mild to moderately severe exposures. Not for use on surfaces that are..

Series 6 | Tneme-Cryl

Industrial grade, matte finish, water-based coating with excellent color retention. Good overall protection for most interior/exterior surfaces in mild to moderately severe exposures. Application..

Series 10 | Tnemec Primers

Chemically active, rust-inhibitive primer for ferrous metals. Provides extended weathering for shop and field priming of structural and miscellaneous steel. Series 10-99W can also be used as..

Series V10 | Tnemec Primers

Chemically active, rust-inhibitive primer for ferrous metals. This low VOC primer provides extended weathering for shop and field priming of structural and miscellaneous steel. Series 10-99W..

Series 20 | Pota-Pox

Industry standard for potable water epoxy coatings for nearly 30 years. Known for its forgiving application characteristics in adverse and varied conditions, and for its benchmark performance.

Series FC20 | Pota-Pox

Fast-curing protective coating for use in steel and concrete potable water storage facilities. Contact your Tnemec representative for other systems and additional information on potential uses.

Series 22 | Epoxoline

An advanced generation, 100% solids, high-build epoxy for the protection of steel and concrete. It provides excellent resistance to abrasion and is suitable for immersion service. Specialized..

Series FC22 | Epoxoline

An advanced generation, 100% solids epoxy liner for the protection of steel and concrete. It provides excellent resistance to abrasion and is suitable for immersion and chemical contact. For..

Series 23 | Enduratone

This product has been discontinued. Please refer to Series 1029 | Enduratone for a suitable alternative, or contact your Tnemec Coating Consultant.

Semi-gloss industrial enamel. Good flow, hiding and protection for most surfaces in mild to moderately severe exposures. Not for use on surfaces that are continually wet or sweat frequently.

Series 25 | HydroLink

This product has been discontinued. Please refer to Series 115 | Uni-Bond DF for a suitable alternative, or contact your Tnemec Coating Consultant.

Waterborne, rust inhibitive coating with excellent adhesion to organic zinc-rich coatings. Used as an intermediate coat on tanks, vessels and other metal substrates. Good overall protection..

Series 27 | F.C. Typoxy

Versatile low-temperature coating ideally suited for steel fabrication and OEM applications. Also widely used as a field tie-coat. Provides fast curing and rapid handling capabilities. Note:..

Series 27WB | Typoxy

A unique, low odor, low VOC, water-based epoxy coating featuring HydroLink curing technology for exceptional durability and corrosion resistance. Used for the protection and finishing of steel..

Series 30 | Spra-Saf EN

An advanced technology, direct-to-metal, corrosion-inhibiting coating with very good early flash-rust resistance, as well as long term corrosion protection and weathering properties. Formulated..

Series 35 | HydroPlate

This product has been discontinued. Please refer to Series 1028 | Enduratone for a suitable alternative, or contact your Tnemec Coating Consultant.

A one component, self-crosslinking finish coat formulated for use on structural steel, tanks, towers, pipes and similar structures. Formulated to resist mildew growth on the paint film. Note:..

Series 37H | Chem-Prime H.S.

Lead- and chromate-free, fast-drying, corrosion-resistant primer that accepts a variety of high-performance topcoats. Ideally suited for steel fabricators, OEM’s and field applications where..

Series 41 | Thinners

All thinners are classified under Series 41. Product datasheets are not available for thinner products. MSDS available. For further thinning instructions, please refer to the product the thinner..

Series 43-36 | Chrome Aluminum

Metallic aluminum finish for protection against weather, heat and mild industrial fumes. Used on primed or previously-painted carbon and galvanized steel: tank exteriors, piping, equipment and..

Series 44-500 | Skip-Saf

A disappearing colorant (patent pending) to aid in the uniform application of the clear coat. Adding Series 44-500 Skip-Saf to Series 76 and Series 1076 will temporarily provide a color..

Series 44-600 | UV Blocker

Please contact your Tnemec Coatings Consultant for specific application instructions. Series 44-600 is an additive package used to increase the resistance of Series 73, 247, 248, 290,..

Series 44-700 | Epoxy Accelerator

Special additive for use with select epoxies to accelerate the cure rate and allow for coating application at temperatures down to 35°F (2°C).

Series 44-710 | Urethane Accelerator

Special additive for most Tnemec urethane coatings affording low temperature application and accelerated cure for rapid handling and recoat situations.

Series 44-712 | UVX Accelerator

Special additive for Series 740/750 UVX affording low temperature application and faster moisture resistance.

Series 44-900 | Adhesion Promoter

An additive package to promote the adhesion and corrosion protection of Series 35 and 115 to selected substrates and primers.

Series 46-465 | H.B. Tnemecol

Versatile coal tar coating for use in immersion, splash and spillage, chemical fumes and below-grade environments.

Series 46H-413 | Hi-Build Tneme-Tar

High-build corrosion resistant coating providing one coat protection for concrete and steel in a variety of chemical, immersion and underground conditions. Also, when a two-coat application..

Series 51 | PVA Sealer

A waterborne primer-sealer for uncoated drywall in interior dry environments.

Series 54 | Masonry Filler

Single component coating for filling surface voids in porous concrete and masonry block on interior, dry, above-grade masonry surfaces.

Series 61 | Tneme-Liner

Tightly cross-linked epoxy with excellent corrosion and chemical resistance. Principally used for immersion service, including fuel and crude oil storage, chemical containment and wastewater..

Series 63-1500 | Filler and Surfacer

This product has been discontinued. Please refer to Series 215 | Surfacing Epoxy for a suitable alternative, or contact your Tnemec Coating Consultant.

A non-shrinking, trowel-grade filler and surfacer for concrete or steel, with high bond strength and outstanding resistance to abrasion, impact, wet conditions, corrosive fumes and chemical..

Series 66 | Hi-Build Epoxoline

Industry standard for epoxy coatings for over 30 years. Known for its forgiving application characteristics in adverse and varied conditions, and for benchmark performance.

Series L69 | Hi-Build Epoxoline II

A versatile low VOC epoxy for protection and finishing of steel and concrete. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact..

Series L69F | Hi-Build Epoxoline II

A versatile low VOC, factory accelerated epoxy for protection and finishing of steel and concrete. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact..

Series N69 | Hi-Build Epoxoline II

An advanced generation epoxy for protection and finishing of steel and concrete. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact..

Series N69F | Hi-Build Epoxoline II

An advanced generation epoxy for the protection and finishing of steel and concrete. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure...

Series V69 | Hi-Build Epoxoline II

An advanced generation epoxy for protection and finishing of steel and concrete. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact..

Series V69F | Hi-Build Epoxoline II

An advanced generation epoxy for the protection and finishing of steel and concrete. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure...

Series 72 | Endura-Shield

A low VOC coating highly resistant to abrasion, wet conditions, corrosive fumes, chemical contact and exterior weathering. NOT FOR IMMERSION SERVICE.

Series 73 | Endura-Shield

A coating highly resistant to abrasion, wet conditions, corrosive fumes, chemical contact and exterior weathering. High build quality combines with project specific primers for two-coat, labor..

Series 73U | Endura-Shield

A coating highly resistant to abrasion, wet conditions, corrosive fumes, chemical contact and exterior weathering. High build quality combines with project specific primers for two-coat, labor..

Series 76-762 | Endura-Clear

This product has been discontinued. Please refer to Series 1070 | Fluoronar for a suitable alternative, or contact your Tnemec Coating Consultant.

A unique clear coat used to both enhance the finish and extend the long-term weathering qualities of pigmented Endura-Shield. Resists most graffiti markings.

Series 76-763 | Endura-Clear

This product has been discontinued. Please refer to Series 1070 | Fluoronar for a suitable alternative, or contact your Tnemec Coating Consultant.

A unique clear coat used to both enhance the finish and extend the long-term weathering qualities of pigmented Endura-Shield. Resists most graffiti markings.

Series 82HS | Versatone

A high solids, single component, silicone-alkyd finish coat that provides superior color and gloss retention over conventional alkyd enamels. Primarily used for coating primed or previously..

Series 84 | Ceramlon ENV

A high-build, ceramic-like coating that provides excellent protection and easy cleaning. May be applied to both steel and concrete providing excellent resistance to abrasion, staining and many..

Series 88HS | Azeron H.S. Primer

Fast-dry, lead- and chromate-free, rust-inhibitive shop primer for structural and miscellaneous steel that is to be enclosed, protected or topcoated.

Series 90-1K97 | Tneme-Zinc

This product has been discontinued. Please contact your Tnemec Coatings Consultant for a suitable alternative.

An advanced technology, single-component, moisture-cured, zinc-rich primer providing extraordinary performance, user-friendly and easy application. Also used for field touch-up of inorganic..

Series 90G-1K97 | Tneme-Zinc

An advanced technology, single-component, moisture-cured, zinc-rich primer providing extraordinary performance, user-friendly and easy application. Also used for field touch-up of inorganic..

Series 90E-92 | Tneme-Zinc

Self-curing, primer/finish with tenacious bonding and abrasion resistance qualities. Its galvanic action resists undercutting. Excellent stand alone performance in high temperature or long-term..

Series 90-97 | Tneme-Zinc

An advanced technology, two-component, moisture-cured, zinc-rich primer providing extraordinary performance. It’s user friendly and rapid curing so chemical- and corrosion-resistant topcoats..

Series H90-97 | Tneme-Zinc

An advanced technology, two-component, moisture-cured, zinc-rich primer providing extraordinary performance. It's user friendly and rapid curing so chemical- and corrosion-resistant topcoats..

Series 90-98 | Tneme-Zinc

Self-curing, corrosion-resistant steel primer with tenacious bonding and abrasion resistance qualities. Its galvanic action resists undercutting. Excellent stand alone performance in high temperature..

Series 91-H2O | Hydro-Zinc

A two-component, moisture-cured, zinc-rich primer for the interior and exterior of steel potable water tanks. Provides outstanding long-term corrosion resistance when used as a primer in conjunction..

Series 94-H2O | Hydro-Zinc

A single-component, moisture-cured, zinc-rich primer for steel structures, including the interior and exterior of steel potable water tanks. Provides outstanding long-term corrosion resistance..

Series 104 | H.S. Epoxy

Versatile coating applies up to 10 mils per coat on steel or concrete. Protects in immersion, salt spray and chemical exposures. Superior abrasion- and stain-resistance.

Series 113 | H.B. Tneme-Tufcoat

High performance coating suitable for concrete, steel and other commonly used building materials. Features include high-build, low odor, non-yellowing white and fade resistant colors; easy cleanup..

Series 114 | H.B. Tneme-Tufcoat

High performance gloss coating suitable for concrete, steel and other commonly used building materials. Features include high-build, low odor, non-yellowing white and fade resistant colors;..

Series 115 | Uni-Bond DF

A high-performance, versatile coating appropriate for a variety of uses including:
Exterior Steel: Waterborne, rust-inhibitive coating with excellent adhesion to organic zinc-rich coatings...

Series 120-5001 | Vinester

A finish coat designed for superior protection against organic and inorganic acids and sour crude when stored at elevated temperatures in insulated tanks. Sprayable lining for tanks and vessels...

Series 120-5002 | Vinester

A primer designed for superior protection against organic and inorganic acids and sour crude when stored at elevated temperatures in insulated tanks. Sprayable lining for tanks and vessels...

Series 130 | Envirofill

Exceptional filling capabilities for interior/exterior porous concrete and CMU. Seals and primes surface for application of a variety of high performance water- and solvent-based topcoats in..

Series 135 | Chembuild

High-build coating with superior wetting for marginally prepared rusty steel and tightly adhering old coatings. Excellent abrasion-, chemical- and corrosion-resistance. Perfect foundation for..

Series L140 | Pota-Pox Plus

Versatile epoxy coating for protection and finishing of steel. It has excellent resistance to abrasion and is suitable for immersion service. This product can be used for lining storage tanks..

Series L140F | Pota-Pox Plus

Versatile epoxy coating (factory accelerated version of L140) for protection and finishing of steel. It has excellent resistance to abrasion and is suitable for immersion service. This product..

Series N140 | Pota-Pox Plus

Innovative potable water coating which offers high-build edge protection and allows for application at a wide range of temperatures (down to 35°F or 2°C with 44-700 Accelerator). For use on..

Series N140F | Pota-Pox Plus

Innovative potable water coating which offers high-build edge protection and allows for application at a wide range of temperatures (down to 35°F or 2°C). For use on the interior and exterior..

Series V140 | Pota-Pox Plus

Innovative potable water coating which offers high-build edge protection and allows for application at a wide range of temperatures (down to 35°F or 2°C with 44-700 Accelerator). For use on..

Series V140F | Pota-Pox Plus

Innovative potable water coating which offers high-build edge protection and allows for application at a wide range of temperatures (down to 35°F or 2°C). For use on the interior and exterior..

Series 141 | Epoxoline

High solids coating which offers high-build edge protection and excellent corrosion resistance. For use on the interior and exterior of steel or concrete tanks, reservoirs, pipes, valves, pumps..

Series 151-1051 | Elasto-Grip FC

Penetrating, flexible and low-odor primer for sealing cementitious and other porous substrates. Also excellent as a tie-coat for specialized finishes over sound existing coatings.

Series 152 | Tneme-Tape

Flexible tape provides reinforcement for coatings that will bridge cracks and expansion joints.

Series 156 | Enviro-Crete

Flexible, breathable coating primarily for concrete and masonry that can fill and bridge minor hairline cracks. Excellent elastomeric protection against driving rain, alternate freezing-thawing..

Series 157 | Enviro-Crete

Flexible, breathable coating primarily for concrete and masonry that can fill and bridge minor hairline cracks. Excellent elastomeric protection against driving rain, alternate freezing-thawing..

Series 158 | Bio-Lastic

A durable coating specially formulated to resist mildew growth on the paint film. Permeable and flexible, it’s capable of bridging cracks and can withstand minor substrate movement, frequent..

Series 161 | Tneme-Fascure

Low temperature-cure, corrosion-resistant coating for protection against abrasion, immersion and mild chemical contact. Fast recoat at 75°F (24°C).

Series 180 | W.B. Tneme-Crete

Decorative, high-build protection against weather, driving rain, industrial fumes and alternate freezing-thawing. Formulated to resist mildew growth on the paint film. Available in smooth (Series..

Series 181 | W.B. Tneme-Crete

Decorative, high-build protection against weather, driving rain, industrial fumes and alternate freezing-thawing. Formulated to resist mildew growth on the paint film. Available in smooth (Series..

Series 201 | Epoxoprime

High-solids moisture tolerant epoxy used for priming concrete, wood and drywall. Also as a stand-alone one-coat clear floor sealer.

Series 203 | Epoxoprime LV

A low viscosity, high-solids, moisture tolerant epoxy used to prime and seal concrete floors. Especially useful when penetration is needed to sufficiently anchor thin-film epoxy flooring systems..

Series 205 | Terra-Tread FC

A fast-cure, versatile coating that can be used as a penetrating primer or a general duty topcoat for protection against abrasion and mild chemicals. Can be applied in temperatures as low as..

Series 206 | Sub-Flex EP

Flexible epoxy underlayment for bridging small substrate cracks in concrete and to provide a protective waterproof membrane under aggregate reinforced flooring systems.

Series 206SC | ChemBloc

Glass reinforced flexible epoxy mortar basecoat for bridging small substrate cracks in secondary containment concrete structures. Replaces mortar/slurry basecoat for Series 237SC, 239SC and..

Series 210 | Even-Flow SL

A high gloss, high build, self-leveling epoxy topping for concrete floors. It imparts an ultra smooth, aesthetically pleasing finish in a variety of colors, while providing protection against..

Series 211 | Glass Beads

Provides enhanced slip-resistance for added safety in select StrataShield topcoats.

Series 215 | Surfacing Epoxy

An advanced generation, 100% solids epoxy filler and surfacer for concrete or steel. Excellent material for surfacing, patching and filling voids and bugholes in concrete substrates. Generally..

Series 217 | MortarCrete

A single-component, rapid setting, non-shrinking hydraulic cementitious resurfacer used to restore deteriorated concrete surfaces.

Series 218 | MortarClad

A high-performance, aggregate reinforced material for surfacing, patching and filling voids and bugholes in concrete substrates. Generally topcoated with a variety of high-performance epoxies..

Series 222 | Deco-Tread

A decorative broadcast or slurry broadcast laminated floor-topping system installed at 1/8” minimum thickness. Protects against impact, abrasion and mild chemicals with an aesthetically pleasing..

Series 223 | Deco-Trowel

A decorative mortar floor-topping system installed at 3/16” to 1/4” thickness. Protects against impact, abrasion and mild chemicals with an aesthetically pleasing appearance.

Series 224 | Deco-Fleck

A customized decorative floor topping utilizing colored flake, broadcast either at random or refusal. Protects against abrasion and mild chemicals with an aesthetically pleasing speckled appearance.

Series 237 | Power-Tread

A multi-purpose, broadcast, slurry broadcast or mortar applied floor topping system installed at 1/8” to 1/4” thickness. Protects against impact, abrasion and mild chemicals.

Series 237SC | ChemBloc

A multi-purpose resin for fiberglass reinforced mat (65 mils) or mortar/fiberglass reinforced mat (125 mils) secondary containment systems. Protects against chemicals, thermal cycling, impact..

Series 238 | Power-Tread FC

A fast-cure, multi-purpose, broadcast, slurry broadcast or mortar applied floor topping system installed at 1/8” to 1/4” thickness. Protects against impact, abrasion and mild chemicals.

Series 239 | ChemTread

A highly chemical and heat-resistant, multi-purpose, broadcast, slurry broadcast or mortar applied floor topping system installed at 1/8” to 1/4” thickness. Protects against impact, abrasion,..

Series 239SC | ChemBloc

A highly chemical resistant, multi-purpose resin for fiberglass reinforced mat (65 mils) or mortar/fiberglass reinforced mat (125 mils) secondary containment systems. Protects against harsh..

Series 241 | Ultra-Tread MVT

Ultra-Tread MVT is a high performance moisture control system designed to reduce moisture vapor emissions prior to the application of non-breathing, polymer floor topping finishes. Ultra-Tread..

Series 243 | Ultra-Tread V

Ultra-Tread V is a low-odor mortar designed for troweling vertical surfaces such as trenches and equipment pads, and for building cove base. It should be used for vertical application needs..

Series 244 | Ultra-Tread M

Ultra-Tread M is a low odor mortar applied floor topping designed for monolithic applications in abusive service areas. It provides superior performance to other flooring systems such as acid..

Series 245 | Ultra-Tread S

Ultra-Tread S is a low odor, slurry applied floor topping designed for monolithic applications in abusive service areas. It provides superior performance to other flooring systems such as acid..

Series 246 | Ultra-Tread Glaze

Ultra-Tread Glaze is a pigmented, high-build, low odor, polyurethane coating. Typically used as a topcoat for sealing or locking aggregate in Ultra-Tread S broadcast texture finishes. Designed..

Series 247 | EverThane

Extremely hard, chemical-resistant urethane floor coating with superb flow characteristics. Excellent resistance to abrasion, wet conditions, corrosive fumes and chemical contact. Excellent..

Series 248 | EverThane

Extremely hard, chemical-resistant urethane floor coating with superb wear characteristics. Excellent resistance to abrasion, wet conditions, corrosive fumes and chemical contact. Excellent..

Series 251SC | ChemBloc

A chemical resistant primer for use with Series 252SC secondary containment system. Note: Contact your Tnemec representative or Tnemec Technical Services with specific chemical exposures.

Series 252SC | ChemBloc

A highly chemical resistant, multi-purpose resin for fiberglass reinforced mat (65 mils) or mortar/fiberglass reinforced mat (125 mils) secondary containment systems. Protects against harsh..

Series 260 | Tneme-Bond

A chemically active solution used to promote the adhesion of Tnemec Elasto-Shield Series 264 or 265 to steel, non-ferrous metals, glass, fiberglass and to itself when maximum cure time has been..

Series 262 | Elasto-Shield

Chemical- and abrasion-resistant elastomeric membrane with exceptional strength and flexibility. Ideally suited for environmental requirements of waste containment for primary or secondary containment...

Series 264 | Elasto-Shield

Flexible liner providing a seamless monolithic membrane for use in potable water basins, steel tank floors and reservoirs. Also for areas requiring impermeability such as decorative ponds and..

Series 265 | Elasto-Shield TG

A trowel-grade compound for use with Elasto-Shield products. Used to fill and repair cracks, bugholes, spalled or otherwise damaged concrete, masonry and asphalt. Also used for sealing the edges..

Series 270 | Stranlok

A high-performance, fiberglass-reinforced wall coating for protection against acids, alkalis and physical abuse. Stranlok’s 100% solids epoxy technology is solventless and VOC compliant, making..

Series 273 | Stranlok ML

A fiberglass mat reinforced coatings system for walls and ceilings providing cleanability and protection against chemical and physical abuse. Provides a high-performance, smooth, seamless surface..

Series 275 | Stranlok

This product has been discontinued. Please refer to Series 270 | Stranlok for a suitable alternative, or contact your Tnemec Coating Consultant.

A fiber-reinforced coating for protection against acids, alkalis and other aggressive chemical solutions. The dense, seamless surface can be easily cleaned with pressurized hot water.

Series 280 | Tneme-Glaze

A glaze-like corrosion resistant coating for walls, ceilings, floors and other surfaces; resistant to frequent pressurized hot water and detergent cleaning. Used as a topcoat/sealer for heavy..

Series 281 | Tneme-Glaze

A high-gloss, glaze-like coating for concrete floors. It imparts a smooth, aesthetically pleasing finish in a variety of colors, while providing protection against various acids and alkalis,..

Series 282 | Tneme-Glaze

A highly chemical- and solvent-resistant colored novolac glaze coating for walls, floors and other surfaces. Provides improved aesthetics and additional protection against abrasion, impact,..

Series 284 | Deco-Clear

A clear finish for decorative flooring systems. It protects against mild chemicals, impact and abrasion, providing a skid-resistant or smooth finish depending on the number of coats.

Series 285 | Satinglaze

A clear finish with an orange peel texture for diffusing light and reducing glare. Used as an optional finish for decorative color quartz or flake filled flooring systems.
Coves and Vertical..

Series 286 | Deco-Clear CR

A clear novolac finish for decorative flooring systems. It protects against harsh chemicals, impact and abrasion, providing a skid-resistant or smooth finish depending on the number of coats.

Series 287 | Enviro-Pox

A low odor, rapid cure, wear-resistant coating for floors, walls and other substrates, capable of withstanding moderate commercial and industrial environments. It can withstand mild to moderate..

Series 290 | CRU

Extremely hard, chemical-resistant urethane coating with excellent resistance to abrasion, washdown conditions, corrosive fumes and chemical contact. Gloss retention among the best of air dried..

Series 291 | CRU

Extremely hard, chemical-resistant polyurethane floor coating with superb flow characteristics. Excellent resistance to abrasion, wet conditions, corrosive fumes and chemical contact. Gloss..

Series 294 | Clear CRU

Durable, chemical-resistant clear urethane floor coating used as a finish coat for a variety of floor coating systems. It has excellent resistance to abrasion, wet conditions, corrosive fumes..

Series 295 | Clear CRU

Extremely hard, chemical-resistant clear urethane floor coating used as a finish coat for a variety of floor coating systems. It has superb flow characteristics, excellent resistance to abrasion,..

Series 296 | Enviro-Glaze Clear

A clear, low odor, fast dry, low VOC, waterborne polyurethane floor coating for interior wall and floor applications. Provides enhanced abrasion resistance and stain resistance. This user friendly..

Series 297 | Enviro-Glaze

Low odor, fast dry, low VOC, waterborne polyurethane coating for interior wall and floor applications. Provides enhanced abrasion resistance, stain resistance and color stability. This user..

Series 330 | Tank Armor

A thick-film reinforced epoxy internal lining formulated for corrosion control and restoration of petroleum storage tanks. Spray applied at 20 to 40 mils depending on extent of bottom plate..

Series 340 | Tank Armor

A thick-film epoxy formulated for corrosion control and internal lining of petroleum storage tanks. Lining may also be used for select chemical storage tanks. Refer to the Tnemec Chemical Resistance..

Series 345 | Tank Armor

A thick-film reinforced low temperature cure epoxy lining formulated with resistance to a broad range of chemicals, fuels and solvents. Spray applied at 20 to 40 mils.

Series 350 | Tank Armor

A high-build tightly cross-linked high performance epoxy with excellent resistance to a broad range of chemicals, solvents and petroleum over a wide range of temperatures. Principally used as..

Series 351 | Tank Armor

A 100% solids flexible polymer formulated for general use as a trowel grade filler/surfacer for steel and provides protection against chemical attack and environmental degradation. Resistant..

Series 365 | Tank Armor

Spray applied, 100% solids, high build, reinforced epoxy formulated for general use as an internal lining for tanks and other aggressive chemical immersion service. Exhibits excellent range..

Series 390 | Tank Armor

A thick-film reinforced epoxy internal lining formulated for corrosion control of chemical tanks and aggressive chemical immersion. Spray applied at 20 to 50 mils. Series 390 exhibits superior..

Series 391 | Tank Armor

An internal epoxy lining formulated for aggressive chemical immersion and corrosion control of chemical tanks. Contains micro-fiber reinforcement for improved film integrity. Series 391 exhibits..

Series 394 | PerimePrime

Specially formulated, one-component, moisture-cured, micaceous iron oxide and zinc filled primer that offers superior bonding to marginally prepared rusty steel and tightly adhered old coatings...

Series 396 | Tank Armor

A thick-film reinforced epoxy internal lining formulated for corrosion control and abrasion resistance in milling and process environments, chemical plants and refineries. Allows for ultra high-build..

Series 400 | Elasto-Shield

This product has been discontinued. Please contact your Tnemec Coatings Consultant for a suitable alternative.

High-performance, polyurea elastomer, multi-purpose liner especially developed for outstanding abrasion and water resistance. Plural component spray application forms a monolithic barrier that..

Series 406 | Elasto-Shield

A two-component, fast setting, monolithic coating designed to provide a durable polyurethane lining in a single-coat, multi-pass spray application applied with plural component equipment. This..

Series 431 | Perma-Shield PL

A 100% solids, abrasion-resistant lining specifically designed for wastewater immersion and fume environments. Provides low permeation to H2S gas, protects against MIC and provides chemical..

Series 434 | Perma-Shield H2S

A 100% solids, hybrid epoxy mortar designed for severe wastewater immersion and fume environments. Specifically formulated to withstand high levels of hydrogen sulfide gas (H2S), sulfuric..

Series 435 | Perma-Glaze

A versatile, thick film, 100% solids, abrasion-resistant lining specifically designed for wastewater immersion and fume environments. Provides low permeation to H2S gas, protects against MIC..

Series 436 | Perma-Shield FR

A thick film, 100% solids, spray-applied, abrasion-resistant coating designed for wastewater immersion and fume environments. Provides excellent resistance to H2S gas permeation, protects..

Series 446 | Perma-Shield MCU

An advanced technology moisture-cured, hydrocarbon-modified coating providing excellent protection to steel and concrete substrates in wastewater environments. Provides excellent resistance..

Series 530 | Omnithane

Aluminum pigmented primer or finish for marginally cleaned steel. Provides excellent abrasion-, moisture-, chemical- and corrosion-resistance. Suitable for use as a topcoat where an aluminum..

Series 607 | Conformal Stain

Conformal Stain is a penetrating, solvent-based masonry stain for horizontal concrete and virtually all vertical, above-grade concrete, precast, GFRC, exposed aggregate, stucco, terra cotta,..

Series 617 | Conformal Stain WB

Conformal Stain WB is a penetrating, water-based masonry stain for horizontal concrete and virtually all vertical, above-grade concrete, precast, GFRC, exposed aggregate, stucco, terra cotta,..

Series 620 | Phylon 1422

Phylon 1422 is a non-yellowing, acrylic coating that highlights the natural color of masonry by providing a clear, semi-gloss sheen. The treatment does not alter the natural texture of the surface,..

Series 621 | Phylon WB

Phylon WB is a non-yellowing, water-based, acrylic coating that highlights the natural color of masonry by providing a clear, gloss sheen. Phylon WB can also be used for most painted concrete..

Series 624 | Phylon

Phylon 624 is a unique acrylic copolymer, formulated to meet VOC requirements for curing compounds. Phylon 624 is a non-yellowing curing, sealing, hardening, dust proofing and water repellent..

Series 625 | Conformal Clear

Conformal Clear is a penetrating, solvent-based masonry coating for virtually all vertical, above-grade concrete, precast, GFRC, exposed aggregate, stucco, terra cotta, brick and block masonry...

Series 626 | Dur A Pell GS

Series 626 Dur A Pell GS has been formulated to provide superior protection against, and easy removal of, unwanted graffiti. This product is intended for use in conjunction with Series 680..

Series V626 | Dur A Pell GS

Series 626 Dur A Pell GS has been formulated to provide superior protection against, and easy removal of, unwanted graffiti. This product is intended for use in conjunction with Series 680..

Series 629 | CT Densifyer

Concrete treated with CT Densifyer resists dusting and abrasion wear and damage.

Series 632 | Prime-A-Pell H2O Concentrate

Concrete, stone and masonry treated with diluted Prime-A-Pell H2O Concentrate resist water intrusion, stain damage, freeze/thaw spalling, efflorescence and rust damage.

Series 633 | Prime-A-Pell H2O

Concrete, stone and masonry treated with diluted Prime-A-Pell H2O resist water intrusion, stain damage, freeze/thaw spalling, efflorescence and rust damage.

Series 635 | Dur A Pell 10

Concrete, stone and masonry treated with Dur A Pell 10 resist water and chloride ion intrusion, stain damage, freeze/thaw spalling, efflorescence and rust damage.

Series 636 | Dur A Pell 20

Concrete, stone and masonry treated with Dur A Pell 20 resist water and chloride ion intrusion, stain damage, freeze/thaw spalling, efflorescence and rust damage.

Series 660 | Prime-A-Pell 200

Concrete, stone and masonry treated with Prime-A-Pell 200 resist water intrusion, stain damage, freeze/thaw spalling, efflorescence and rust damage.

Series 662 (or V662) | Prime-A-Pell Plus

Concrete, stone and masonry treated with Prime-A-Pell Plus resist water and chloride ion intrusion, stain damage, freeze/thaw spalling, efflorescence and rust damage. Series V662 conforms with..

Series 663 | Prime-A-Pell N.S.

Concrete, natural stone and masonry treated with Prime-A-Pell N.S. resist water intrusion, stain damage, freeze/thaw spalling, efflorescence and rust damage.

Series 664 | Dur A Pell 40

Concrete, stone and masonry treated with Dur A Pell 40 resist water intrusion, stain damage, freeze/thaw spalling, efflorescence and rust damage.

Series 665 | Dur A Pell 100

Concrete, stone and masonry treated with Dur A Pell 100 resist water intrusion, stain damage, freeze/thaw spalling, efflorescence and rust damage.

Series 667 | Deck A Pell 15

This product has been discontinued. Please refer to Series 668 | Deck A Pell 40 for a suitable alternative, or contact your Tnemec Coating Consultant.

Concrete, stone and masonry treated with Deck A Pell 15 resist water and chloride ion intrusion, stain damage, freeze/thaw spalling, efflorescence and rust damage.

Series 668 | Deck A Pell 40

Concrete, stone and masonry treated with Deck A Pell 40 resist water and chloride ion intrusion, stain damage, freeze/thaw spalling, efflorescence and rust damage.

Series 680 | Mark A Way

Liquid cleaner used in association with Chemprobe Series 626 Dur A Pell GS to remove graffiti from block, brick, concrete, stone and other porous masonry substrates. May also be used alone..

Series 700 | HydroFlon

An exterior finish coat especially designed for tanks and other exposed steel substrates. HydroFlon has outstanding resistance to ultra-violet light degradation providing unprecedented long-term..

Series V700 | Low VOC HydroFlon

A low VOC exterior finish coat especially designed for tanks and other exposed steel substrates. This product has outstanding resistance to ultra-violet light degradation providing unprecedented..

Series 701 | HydroFlon

An exterior finish coat especially designed for tanks and other exposed steel substrates. HydroFlon has outstanding resistance to ultra-violet light degradation providing unprecedented long-term..

Series V701 | Low VOC HydroFlon

A low VOC exterior finish coat especially designed for tanks and other exposed steel substrates. This product has outstanding resistance to ultra-violet light degradation providing unprecedented..

Series 740 | UVX

An advanced technology polyurethane finish coat combining low VOC with exceptional performance. Offers superior color and gloss retention for long-term aesthetics on a wide range of exterior..

Series 750 | UVX

An advanced technology polyurethane finish coat combining low VOC with exceptional performance. Offers superior color and gloss retention for long-term aesthetics on a wide range of exterior..

Series 971 | Aerolon AcrylicNew Product

An innovative, fluid-applied, thermal insulating coating utilizing aerogel particles that imparts exceptional insulative properties to a variety of substrates. Ideal for insulating pipes, valves,..

Series 1028 | Enduratone

Water-based, low VOC, High Dispersion Pure acrylic polymer coating providing excellent long term protection in both interior/exterior exposures. May be applied by spray, brush or roller over..

Series 1029 | Enduratone

Water-based, low VOC, High Dispersion Pure acrylic polymer coating providing excellent long term protection in both interior/exterior exposures. May be applied by spray, brush or roller over..

Series 1070 | Fluoronar

A high-solids fluoropolymer coating that provides an ultra-durable finish with user friendly brush, roll and conventional spray application. It has outstanding color and gloss retention even..

Series 1070V | Fluoronar

A low VOC, fluoropolymer coating that provides an ultra-durable finish with user friendly brush, roll and conventional spray application. It has outstanding color and gloss retention even in..

Series 1071 | Fluoronar

A high-solids fluoropolymer coating that provides an ultra-durable finish with user friendly brush, roll and conventional spray application. It has outstanding color and gloss retention even..

Series 1071V | Fluoronar

A low VOC, fluoropolymer coating that provides an ultra-durable finish with user friendly brush, roll and conventional spray application. It has outstanding color and gloss retention even in..

Series 1072 | Fluoronar

A high-solids fluoropolymer coating that provides an ultra-durable finish with user friendly brush, roll and conventional spray application. It has outstanding color and gloss retention even..

Series 1072V | Fluoronar

A low VOC, fluoropolymer coating that provides an ultra-durable finish with user friendly brush, roll and conventional spray application. It has outstanding color and gloss retention even in..

Series 1074 | Endura-Shield II

A coating highly resistant to abrasion, wet conditions, corrosive fumes and exterior weathering. High build quality combines with project specific primers for two-coat, labor saving systems...

Series 1074U | Endura-Shield II

A coating highly resistant to abrasion, wet conditions, corrosive fumes and exterior weathering. High build quality combines with project specific primers for two-coat, labor saving systems...

Series 1075 | Endura-Shield II

A coating highly resistant to abrasion, wet conditions, corrosive fumes and exterior weathering. High build quality combines with project specific primers for two-coat, labor saving systems...

Series 1075U | Endura-Shield II

A coating highly resistant to abrasion, wet conditions, corrosive fumes and exterior weathering. High build quality combines with project specific primers for two-coat, labor saving systems...

Series 1076 | Fluoronar Clear

This product has been discontinued. Please refer to Series 1070 | Fluoronar for a suitable alternative, or contact your Tnemec Coating Consultant.

An exterior clear fluoropolymer finish coat especially designed to enhance the exterior weatherability of Fluoronar and HydroFlon. Fluoronar Clear has outstanding resistance to ultra-violet..

Series 1077 | Enduralume

An acrylic polyurethane finish coat that contains a sparkle aluminum pigment creating a metallic aesthetic finish. It is a highly durable coating that is resistant to abrasion, wet conditions..

Series 1078 | Fluoronar Metallic

A high-solids fluoropolymer coating that provides an ultra-durable metallic or pearlescent finish with user friendly application. It has outstanding color and gloss retention even in the most..

Series 1079 | Metallic Clearcoat

A unique clear coat used to both enhance the finish and extend the long-term weathering qualities of metallic pigmented coatings. Resists most graffiti markings. Series 44-500 (patent 5,548,010..

Series 1079-0762 | Metallic Clearcoat

A unique clear coat used to both enhance the finish and extend the long-term weathering qualities of metallic pigmented coatings. Resists most graffiti markings. Where VOC regulations apply,..

Series 1079-0763 | Metallic Clearcoat

A unique clear coat used to both enhance the finish and extend the long-term weathering qualities of metallic pigmented coatings. Resists most graffiti markings. Where VOC regulations apply,..

Series 1080 | Endura-Shield

A waterborne polyurethane coating that provides color and gloss retention for exterior applications to steel, concrete and other miscellaneous substrates. It features low VOC content, low odor,..

Series 1081 | Endura-Shield

A waterborne polyurethane coating that provides excellent abrasion resistance and color and gloss retention for exterior applications to steel, concrete and other miscellaneous substrates. It..

Series 1254 | EpoxoBlock WB

An advanced generation, low odor, low VOC, high solids, water-based epoxy coating for filling surface voids in porous concrete and masonry block in interior and exterior environments. Provides..